Aztech E310 User manual

Aztech E310-Single/Twin BlackDect Phone

Page 2 of
L e g a l N o t i c e
2009 ©
All rights r e s e r ve d .
No part of this
document may be reproduced, r e pub l i s h e d, or r e tr a n s m i tte d in any form or by any m e a n s
whatsoever, whether electronically or mechanically, including, but not limited to, by way of p h o t o c op y i n g,
recording, information recording, or through retrieval systems without the express written permission. We
reserve the right to revise this document at any time without the obligation to notify any person a n d / o r
entity. All other company or product names mentioned are used for identification purposes only and m a y
be trademarks of their r e sp e c t i ve o wn e r s .
LIMITATION OF LIABILITY AND D A M A G E S
THE PRODUCT AND THE SOFTWARES WITHIN ARE PROVIDED "AS IS," BASIS. THE MANUFACTURER A N D
MANUFACTURER’S RESELLERS ( C O LL EC T I VE L Y REFERRED TO AS “THE S E LL E RS ” ) DISCLAIM ALL W A RR A N T I E S ,
EX P R E SS , IMPLIED OR S T A T U T O R Y , INCLUDING WITHOUT LIMITATION THE I M P L I E D WARRANTIES OF NON-
I N F R I N G E M E N T , MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OR ANY WARRANTIES A R I S I N G
FROM COURSE OF D E A L I N G , COURSE OF P E R F O R M A N CE , OR USAGE OF T R A D E . IN NO EVENT WILL THE S E LL E RS
BE LIABLE FOR DAMAGES OR L O SS , INCLUDING BUT NOT LIMITED TO D I R EC T , I N D I R EC T , SPECIAL W I LL FU L ,
P U N I T I VE , I N C I D E N T A L , EXE M P L A R Y , OR C O N S E Q U E N T I A L , D A M A G E S , DAMAGES FOR LOSS OF B U S I N E SS
P R O F I T S , OR DAMAGES FOR LOSS OF BUSINESS OF ANY CUSTOMER OR ANY THIRD PARTY ARISING OUT OF T H E
USE OR THE INABILITY TO USE THE PRODUCT OR THE S O F T W A R E S , INCLUDING BUT NOT LIMITED TO T H O S E
RESULTING FROM DEFECTS IN THE PRODUCT OR SOFTWARE OR D O C U M E N T A T I O N , OR LOSS OR INACCURACY O F
DATA OF ANY K I N D , WHETHER BASED ON C O N T R A C T , TORT OR ANY OTHER LEGAL T H E O R Y , EVEN IF THE P A R T I E S
HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE ENTIRE RISK AS TO THE RESULTS A N D
PERFORMANCE OF THE PRODUCT OR ITS SOFTWARE IS ASSUMED BY CUSTOMER. BECAUSE SOME STATES DO N O T
ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR D A M A G E S , THE ABOVE LIMITATION MAY NOT A PP L Y
TO THE PARTIES. IN NO EVENT WILL THE SELLERS’TOTAL CUMULATIVE LIABILITY OF EACH AND EVERY KIND I N
RELATION TO THE PRODUCT OR ITS SOFTWARE EXCEED THE AMOUNT PAID BY CUSTOMER FOR THE P R ODUCT.

Page 3 of
Contents
Handset Key Layout................................................................................................................................5
LCD Display and Icons.............................................................................................................................6
Battery Indicator.....................................................................................................................................6
Navigating the Menu .............................................................................................................................7
Menu Option List ....................................................................................................................................7
Setting the language..............................................................................................................................8
Outgoing calls.........................................................................................................................................8
Making a phone call...........................................................................................................................8
Pre dial Method..................................................................................................................................8
Dialing from recent call list................................................................................................................8
Answering an Incoming calls.................................................................................................................9
Setting the volume.................................................................................................................................9
Handset Setting......................................................................................................................................9
Setting the ring volume and melody ................................................................................................9
Handset melody .................................................................................................................................9
Handset ring volume..........................................................................................................................9
Handset name ..................................................................................................................................10
Turning key beep on/off .................................................................................................................10
Manual selection (Only applicable to User using two bases unit) ................................................10
Auto Pickup.......................................................................................................................................10
Phonebook........................................................................................................................................10
Adding phonebook entries ..............................................................................................................10
Dialing a Phonebook entry ..............................................................................................................11
Editing name or number..................................................................................................................11
Deleting an entry .............................................................................................................................11
Deleting All entry .............................................................................................................................11
Caller-ID functions (CLIP)..................................................................................................................11

Page 4 of
New calls ..........................................................................................................................................11
Call Log..............................................................................................................................................11
Calling from the Call log...................................................................................................................12
Erasing a number from the Call list.................................................................................................12
Erasing all numbers from the Call list .............................................................................................12
Store a number from the call log into the phonebook ..................................................................12
Date Time setting.............................................................................................................................12
Register/de-register a handset...........................................................................................................12
Register to a DECT base....................................................................................................................12
To register a handset .......................................................................................................................13
Removing a handset ........................................................................................................................13
Call transfer and Intercom between two handsets............................................................................13
Call transfer and conference call during an external call...................................................................13
To transfer the outside call to another handset .............................................................................13
Internal call (intercom) ....................................................................................................................14
To end an intercom call....................................................................................................................14
Reset of the handset............................................................................................................................14
Base Setting..........................................................................................................................................15
Changing the PIN code (system PIN code).........................................................................................15

Page 5 of
Handset Key Layout
Press to enter menu
mode and enter sub-
menu or to confirm the
selection.
4 - MENU button
1 –Call Button
button
Press to begin and answer
the call
2 –Recall/ Phone
Pulse button
You can activate Recall
function if your phone is
connected toa PABX,or if
you use Select Services.
3 - Phonebook
In standby mode, press to
enter phonebook mode.
Press to confirm selection
5 - MuteRinger
Press when the phone is in
standby to mute the ringer.
6 - Volume
Allow you to adjust the
handset volume
7–Speaker Phone
Press to turn on/off the
speaker phone.
Press during a call to
mutethe microphone
8 - MuteCall
9 - Intercom button
Press to make an intercom call
(if you have more thanone
handset)
10 –Keypad Lock
Press and hold to lock /
unlock the keypad on the
handset
11 –Flash Selection
Press to select long / short
flash.

Page 6 of
LCD Display and Icons
Battery Indicator
When the battery is flat or low power, you will see an empty battery symbol in the display
screen. The handset will no longer able to perform normal operation if the battery is flat or low
power. You are recommended to place the handset back onto the base unit for recharging the
battery. It is recommended that the handset is to be charged at least 8 hours to ensure maximize
the battery life span.
• Full battery
• Empty battery
When you are in the midst of a conversation and the handset will emit a warning beep sound if
the battery is low in power. The call will be disconnect once the battery is flat, you are advised to
place the handset on the base unit to charge.

Page 7 of
Navigating the Menu
The Aztech E310 has a menu page. In the menu there are a list of options which enable you to
customize your phone settings.
To enter the menu, press the Menu button (4). Use the Right (7) or Left (2) key tonavigate to the
option you want to customize. Press OK (4) to show more options or to confirm thesetting
changed. To go back in the previous menu or exit the menu, press the ESC/INT (9) key.
Menu Option List
Phonebook
Handset
Base
New Entry
Ring Tone
External
Dial Mode
Tone
Edit Entry
Internal
Pulse
Delete Entry
Volume
Recall
Short
Delete All
Auto Talk
On
Long
Off
System Pin
Handset Name
Keypad Beep
On
Off
Reset
Language
Date Time
Register
De Register

Page 8 of
Setting the language
The option enable user to choose the preferred language display on the handset.
You can do so by selecting the Menu button (4) Use the Left (2) or Right (7) button to navigate
to ‘Handset’ option and press Confirm/OK (4) button to open another list of options. Use the
Left (2) or Right (7) keys again to navigate to ‘Language’ option and press OK (4).
You may now select your preferred language by using the Right (7) or Left (2) key. To confirm
your selection by pressing Confirm/OK (4) button.
Outgoing calls
Making a phone call
Press the Call button (1) and you will hear the dial tone. You may enter the telephone
number you wish to dial.
Press the Call button (1) when you want to end the call.
Pre dial Method
Enter the telephone number and press the Call button. Your call will be connected shortly.
To correct the number which you have entered wrongly in the pre-dial, you can do so by using
the Mute button (8) to delete the number entered.
Take note that if you haven’t pressed any button for 20 seconds, the handset will return to
standby mode, and you will have to enter the number again.
Dialing from recent call list
This option allows you to dial from the last three telephone number called from this handset.
Press the Call button (1) when you will hear the dial tone. Press the Redial key (11), the last
telephone number you dialed will appear on the display. Navigate by using the Left (2) or
Right (7) key to select another last two numbers dialed.
Press the Call button (1) to dial number shown on the display.

Page 9 of
Answering an Incoming calls
To answer an incoming call, press the Call button (1).
Setting the volume
During a conversation you can set the volume by pressing the Volume button (6). You can set
the volume alternatively in between 1-5. You can also use the left/right button to do so.
Handset Setting
Setting the ring volume and melody
You can customized the ringer melody for an incoming call (external) and Intercom call
(internal)
Handset melody
Press Menu button (4). Use the Left or Right button to scroll to ‘HANDSET’and press OK (4).
Use the Left or Right button to scroll to ‘RING TONE’ and press OK (4).Use the Left or Right
button to scroll to ‘EXTERNAL’ or ‘INTERNAL’ and press OK (4).Select the melody you want,
and then press OK (4).
Or the external call melody can be set as follows:
Press and hold the melody button (6) until the current melody is heard. Select the desired
melody (1-9) by means of the Left or Right keys. Press melody button (6) again to confirm the
setting.
Handset ring volume
Press Menu button (4) Use the Left or Right button to scroll to ‘HANDSET’ and press OK
(4).Use the Left or Right button to scroll to ‘RING TONE’ and press OK (4).Use the Left or
Right button to scroll to ‘VOLUME’ and press OK (4).Select the volume level you want, and
then press OK (4).
Or
Press the volume button (6) in standby. The handset will ring in the current volume. Use the
Left or Right keys to select the desired volume (0-5). Press the volume button (6) again to
confirm the setting.
Note: When the volume is set to 0, the handset will not ring when there is an incoming call
and the display will show

Page 10 of
Handset name
You can change the name that appears on the screen (max. 9 characters). Press Menu key
(4).Use the Left or Right button to scroll to ‘HANDSET’ and press OK Use the Left or Right
button to scroll to ‘HANDSET NAME’ and press OK (4).The current handset name will be shown.
Delete the character by the Mute button (8). Use the keypad to enter the new name. Press the
Menu/OK (4) button to confirm.
Turning key beep on/off
You can turn off or on the handset keypad sound. Press Menu button (4). Use the Left or
Right button to scroll to ‘HANDSET’ and press OK (4).Use the Left or Right button to scroll to
‘KEYPAD BEEP’ and press OK (4).Use the Left or Right button to scroll to ‘ON’ and press OK (4).
Manual selection (Only applicable to User using two bases unit)
If you set the handset to ‘manual selection’, the handset will only detect the base unit you
have selected. Press Menu button (4). Use the Left or Right button to scroll to ‘HANDSET’
and press OK (4).Use the Left or Right button to scroll to ‘SELECT BASE’ and press OK (4).Use the
Left or Right button to select to ‘MANUAL’ or ‘AUTO’.Select “MANUAL’ if you want to set it as
MANUAL mode.
Note: When you have activated Automatic base selection and the handset is out of range on
the current base, the handset will only search for the strongest base in the surrounding.
Caution: Before you can select a base unit, the handset must be registered to the base first.
Auto Pickup
The call will be automatically pickup when the handset is taken out from the base when there
is an incoming call. This feature can be enabled or disabled with the steps below;
Press Menu button (4). Use the Left or Right button to scroll to ‘HANDSET’ and press OK
(4).Use the Left or Right button to scroll to ‘AUTO TALK’ and press OK (4).Use the Left or Right
button to select to ‘ON’.
Phonebook
You can program 20 phonebook entries in the phone’s memory. Display Names can be up to
16 characters and telephone numbers can be up to 24 digits.
Adding phonebook entries
Press the Phonebook button (3) until the icon is on, Press OK key (4) and ‘NEW ENTRY’ will
display. Press OK key (4) and enter the name by using the alphanumerical keypad. Press the
Menu/OK key (4) to confirm the name. Enter the telephone number, and Press the Menu/OK
key (4) to confirm.