AZUNO DTPG150A User manual

1.
2 3
Thanks you for purchasing AZUNO digital tire pressure gauge, model
DTPG150A with hose or model DTPG150B.
Please ensure you read this user manual carefully prior to using this
product and follow the operational Instructions and guidelines correctly.
Please keep this user manual in a safe place for future reference.
First press the power button to turn on the digital tire pressure
gauge.Then press the select button to choose the correct setting.
2. Remove the tire valve cap, place the pressure gauge on the valve
stem, and press down hard enough that the hissing sound
disappears.
3. Keep the connection for 3-5 seconds. Wait for the reading to
become stable, and then read the results.
4. If the pressure is too low, please inflate the tire in time If the
pressure is too high, keep the connection stable while pressing the
pressure release button to adjust the tire pressure.
1. While the gauge is in use, hold it steady and still so that the result is
accurate.
5. After use, remove the swivel chuck and reset the device by pressing
the pressure release button.
6. Do not forget to put the tire valve cap back on, and then press the
power button to turn the gauge off.
*Attention*
Please read the Vehicle
Safety Manual or Car Tire
Pressure Standard Mark
before you adjust the tire
pressure, and
adjust it according to its
actual requirements.
Settings Size of Swivel Chuck 8mm Standard Chuck
Minimum Increment 0.1PSI, 0.1BAR Stainless Steel Hose Length
(Model DTPG150A Only) 30cm
Accuracy ±1% Reference of Tire
Pressure
2.1-2.5BAR
30-36PSI
Power Source 2xAAA Gauge Display
Screen Size 20×φ60mm
Measurement Range
Unit Conversion
0-150 PSI, 0-10.34 Bar, 0-10.55 kg/cm²,0 -1.03MPA
PSl, BAR,
MPA, KG/CM²
1BAR=1.02KG/CM =0.102MPA=14.3PSI
2
Acknowledgement
Product description:
Instructions for use
Usage tips
Swivel Chuck
LCD Display
Select Button
Power Button
Pressure
Release
Button

AZUNO Tools DTPG150A & DTPG150B
Digital Tire Pressure Gauge
It is so important to keep tires pressure properly maintained,
that is why we need a handy tire pressure gauge to check tire pressure
quick and easy, and AZUNO will always be a trustworthy choice.
2. When connecting and removing the gauge, there will be a
small amount of air leakage, Which is normal.
3. While using the pressure release button, pay attention that the
deflation speed is not too fast.
4. To ensure a good tight fit, do not disassemble this gauge too often.
5. This product is an electronic digital pressure measuring device
with precise sensors. Keep it away from water when using it, and
store it in a dry place.
6. If there is any abnormality when using this gauge, first check the
air tightness to ensure that all parts are tightly connected. If it's
defective, please contact us for a solution.
7. This product contains small parts and should be kept away from
small children.
Warranty and Support
Protect Your Purchase
4
DTPG150A DTPG150B