LUXOMAT® ALC-ELU SLS
Installation and Operating Instruction for B.E.G. - Automatic-system-light LUXOMAT®ALC-ELU SLS
1. Assembly ALC-ELU SLS 3. Attaching the system glass
1) Un-fasten the stud screws (1)
2) Put system glass on socket ring (2)
3) Fasten the screws equally on all sides until the
system-glass is firmly attached (3).
4. Mounting types
1) Wall mounting
1)
Detach lighting part from the base by means
of a screwdriver. (a)
2) Insert the cable, from the bottom (b) or from
the back here.
3) Connect the cables as indicated by the termi-
nal labels (see point 9 for wiring diagrams).
4) Attach the assembly base with two screws (c).
5) Screw in incandescent lamp 2G7 9W
6) Secure system glass to system light lower
section (see point 3)
2. Installation
1) If possible mount unit on a safe place
2)
Influence of weather reduces the lifetime
of the unit. Please take care to mount
correctly.
5. Mounting place
1) System light lower section can be freely
combined with 17 different System-Globes
SG
2) Socket ring with stud screws
3) Locking screw for connector base
4) Plug-in connector base
a
b
c
c
2) Outside corner mounting with plug-in socket
12
GB
2
31
4
1
2
3
