B-Tech BT899XL-FD Instruction Manual

B-TECH AV MOUNTS
www.btechavmounts.com
PLEASE KEEP THIS FOR FUTURE REFERENCE
BT899XL-FD
FIXED DROP PROJECTOR CEILING MOUNT
WITH MICRO-ADJUSTMENT
INSTALLATION GUIDE & PARTS LIST
This Pack Contains 1 Mount
CONTENTS
INSTALLATION TOOLS REQUIRED
FEATURES
Crosshead
screwdriver
Drill 10mm masonry bit
or 6mm wood bit
Pencil
Installation Safety Notes.....................................................................................................................2
Parts List.............................................................................................................................................4
Installation Instructions.......................................................................................................................6
Product Dimensions..........................................................................................................................15
B-Tech Contact Details.....................................................................................................................16
13mm
spanner or socket
Ɣ Ceiling mount designed for projectors up to 25kg (55lbs)
Ɣ +/-13° tilt adjustment, +/-6° roll adjustment and 360° swivel
Ɣ Optional micro-adjustment for perfect alignment of projected images
Ɣ Unique ‘Carousel’ mounting plate for universal compatibility
Ɣ Maximum distance between any two fixing points 493mm
Ɣ Suitable for angled/cathedral ceilings
Ɣ Includes Ø50mm extension pole
Ɣ Suitable for projectors using M2.5, M3, M4, M5 and M6 fixings
Ɣ Theft deterrent security screws provided as standard
(excludes M2.5 and M3 fixings)
Ɣ Integrated cable management for a smart installation
Ɣ All mounting hardware & fixings included
Registered Design Nºs: 001713306-0004 / 002741256-0008
ß
ß
360°
ß
ß
25kg

BT899XL-FD
PARTS LIST
4
Suitable for loads
up to 25kg
10
24
19 11
23
22
20
26
27
25
28
29
18
21
9
30
31
12
13
16
17
15
14
5
4
3
6
8
1
7
2
Micro-adjustment assembled

5
PLEASE KEEP THIS FOR FUTURE REFERENCE
33
34
32
DE
A
FG H I
LK
J
BC
A M2.5 x 25mm SCREW
4
B
M3 x 12mm SCREW 4
C
M3 x 25mm SCREW 4
D
M4 x 12mm SCREW 4
E
M4 x 25mm SCREW 4
F
M5 x 12mm SCREW 4
G
M5 x 25mm SCEW 4
H
M6 x 12mm SCREW 4
I
M6 x 25mm SCREW 4
J
ID6.5 T12mm SPACER
4
K
M3 METAL WASHER
4
L
M4 METAL WASHER
4
A1
M8 OD18 T1.5mm WASHER
4
A2
M8 x 50mm COACH SCREW
4
A3
Nº 10 x 50mm WALL PLUG 4
FIXING KIT
INTERFACE KIT
ITEM QTY
A1 A3
A2
ITEM PART NAME QTY
1
2
3
1
LESUORAC
4
4
5
4
4
6
4
7
1
8
4
9
01
1
TUN COLYN 8M
11
WERCS YTIRUCES mm21 x 6M
21
31
41
61
51
17
18
25
19
20
2
TEKCA
RB TNEMTSUJDA ORCIM
2
WER
CS YTIRUCES mm03 x 4M
2
TUN COLYN 4
M
82
29
34
33
03
32
1
MOUNTING PLATE
1
ETALP GNINIOJ
1
ETALP LEVIWS
21
1
3mm HEX KEY
22
23
26
27
4mm SECURITY KEY 1
24
5mm SECURITY KEY 2
1
M8 WASHER
Ø50mm COLLAR
CEILING PLATE
1
4
M8 x 12mm SCREW
4
EXTENSION POLE 1
4
M8 LOCK WASHER
M8 x 65mm SAFETY BOLT
M8 SPRING WASHER
1
1
POLE ADAPTOR 1
2
WERCS BURG mm6 x 01M
1
T
LOB YTEFAS mm06 x 8M
M6 x 20mm GRUB SCREW 1
MOUNTING SCREW
8
M6 T1mm METAL WASHER
M6 T1.2mm METAL WASHER
6
M8 x 16mm HEX SCREW
M6 x 8mm SCREW
M8 T2mm PLASTIC WASHER
1
SHORT LEG
LONG LEG
31
M4 T1mm METAL WASHER
2
M4 T1.6mm PLASTIC WASHER
2

6
INSTALLATION INSTRUCTIONS
1
2
Ø50mm POLE
Assemble Pole to Collar
i. Slide item 2 onto item 8.
ii. Fix item 2 to item 8 using items 6 and 7.
7
6
34
22
iii. Tighten the grub screws evenly
on item 2 using item 33.
33
GRUB SCREW
8
8

7
1
54
3
34
2
Mount Pole and Collar to Ceiling Plate
Set the required tilt angle when fitting item 2 to item 1, using items 3, 4 & 5.
Tighten with item 34.
2
The tilt angle can
also be adjusted
once mounted to
the ceiling or wall
5
34
5
4
3
34
5
4
2
8
3
1

8
3
Mounting the Ceiling Plate to Ceiling / Wall
10mm
Leave 10mm gap
for next step
CEILING
Twist
Twist
i. Pre-drill holes for ceiling fixings.
ii. Assemble two fixing screws in place, corner to corner leaving a 10mm gap
between the screw head and ceiling.
iii. Hook item 1 onto the fixing screws and twist into position.
B-Tech highly recommends this product be installed by a suitably qualified person.
The installer must be satisfied that the types of fixings used are suitable for the type of ceiling the product is to be mounted to.
Care must be taken as to where this product is located, as some ceilings and walls are not suitable for installation.
When drilling holes, knowledge must be obtained to avoid contact with any electrical cables and/or gas and water pipes contained
within the ceiling or walls.
IMPORTANT
Ceiling plate dimensions
are available on page 15
1
A1

9
iv. Assemble the remaining two fixings to secure the ceiling plate.
A1

10
Connect item 8 to item 10 using item 9.
4Attach Mounting Plate to Pole
24
32
10
10
31
30
34
9
8
9

11
5Attach Interface Assembly to Projector
JK
20
Loosen part 20, adjust legs then
re-tighten.
MOUNTING HOLE
DE
ABCFGHI
SHORT LEG ASSEMBLY
Unfasten and remove
parts 20 & 21 and
replace part 14
with part 15
16
20
21
15
14
16
16
15
14
32

For a precise post-installation alignment of the tilt or roll, the micro-adjustment can be
installed as shown. If the micro-adjustment is not required proceed to Step 7.
Optional Micro-Adjustment
i. Roll micro-adjustment
ii. Tilt micro-adjustment
34
27
28
26
26
25
25
22
29
28
23
27
29
10
34
12
34
12
6

13
Connect item 11 to item 10 using items 22.
7Hook Projector onto Ceiling Mount
22
10 11
34
22
23
23
22
11
10
22
22
23

14
8
ii. Micro-adjustment (if installed).
Adjusting the Projector
i. To tilt/roll, loosen items 22, adjust and re-tighten.
Loosen item 22 (M6 x 12mm screws) by one turn using item 34.
Micro adjust item 26 (M4 x 30mm screws) using item 34 to roll or tilt the projector.
34
22
22
+ / - 13º pitch
+ / - 6 º roll
M6 x 12mm
SCREW
M6 x 12mm
SCREW
M4 x 30mm
SCREWS
34
26
26
Tilt
Roll
26
22
22
ROLL
TILT

BT899XL-FD
PRODUCT DIMENSIONS
THESE INSTRUCTIONS ARE INTENDED AS A GUIDE ONLY AND B-TECH ACCEPTS NO
LIABILITY FOR THE ACCURACY OF THE INFORMATION CONTAINED IN THIS DOCUMENT.
28mm
43.5mm
6.5mm
493.5mm (max.)
143.5mm
143.5mm
493.5mm
175mm
318.5mm
318.5mm
521.5mm
521.5mm
6.2mm
263.5mm (max.)
60mm
20mm
283.5mm
71mm
200mm 145mm
40mm
35.5mm
38.8mm
2x
25mm
25mm
R5.25mm
150mm
CEILING PLATE
SHORT LEG
ASSEMBLY
LONG LEG
ASSEMBLY
15
200mm
90º
50.8mm
80mm
50mm
23mm
155.5mm
98.5mm
6mm
48mm
10mm
142.5mm
BT899XL-FD025: 386.5mm
BT899XL-FD050: 636.5mm
BT899XL-FD100: 1136.5mm
BT899XL-FD150: 1636.5mm
BT899XL-FD200: 2136.5mm
BT899XL-FD300: 3136.5mm

B-TECH AV MOUNTS
HEAD OFFICE
B-Tech International Limited
Bennett House, Long March, Daventry, Northants., NN11 4NR, UK
Email: [e-mail]
©2019 B-Tech International Design and Manufacturing Limited. All rights reserved.
B-Tech AV Mounts is a division of B-Tech International Design & Manufacturing Ltd.
B-Tech, Better By Design, System 2 and Pro Install are registered trademarks of B-Tech International Design & Manufacturing Ltd.
All other brands and product names are trademarks of their respective owners.
Photographs are for illustrative purposes only. E&OE.
AMA-BT899XL-FD-V1-0919-03 MADE IN P.R.C.
www.btechavmounts.com