baby express be mini User manual

User’s Guide
be mini Dual Electric Breast Pump
baby express
making parenting a breeze
Please read this user’s guide carefully before using

Product warning
Attention
Prohibition Attention
Do not put the motor unit into the fire or
heat.
Please read the manual carefully on the correct
operation of the product.
Warning Marks:
DANGER
Do not put the motor unit, power adapter
into liquids, such as water, gas, drink,
etc.
Do not use or charge the product in the
environment with a temperature of more
than 45˚C.
Please keep it out of reach from the baby.

Do not use the product when having a
bath or taking a shower.
Please do not touch the main unit when it
drops into the water. Please unplug the
power adapter instead.
A breast pump is a tool to help mothers in breastfeeding and should be used for the
sole purpose of expressing breast milk. Some new mothers may face blocked
mammary gland (which can be caused by congenital invaginated nipple), or
insufficient milk supply. If faced with such problems, it is recommended to seek
professional advice to verify that the mammary gland is unblocked.A breast pump is a
tool to help mothers in breastfeeding and should be used for the sole purpose of
expressing breast milk. Some new mothers may face blocked mammary gland (which
can be caused by congenital invaginated nipple), or insufficient milk supply. If faced
with such problems, it is recommended to seek professional advice to verify that the
mammary gland is unblocked.
NOTE
CAUTION
Please use the original power adapter
that comes with the product.
Please contact the manufacturer or
professional for repair if there is a
malfunction of the product.

NOTE
Before use, please clean and sterilise the accessories. After use, clean the
accessories as well, and keep them dry; Please note, the motor unit and power
adapter cannot be washed with water or sterilised.
Take apart the accessories before sterilisation; Please allow the components to cool
for 20 mins after sterilisation is completed before assembling to avoid damage.
Please make sure that you dismantle or install the product according to the proper
order; Pay attention to the small accessories when dismantling or washing, or it may
cause installation failure or malfunction.
Do not let the bottle lean or fill with milk
over the max. mark.
When cleaning silicone valve, diaphragm
and other silicon parts, please rinse gently.
If damaged, it will affect the suction.
Please avoid over-pumping to avoid breast injuries. Please seek medical advice if
breast becomes painful because of using the breast pump.
When there is only a little milk, please use the electrical breast pump under medical
professional’s guidance.
To have a smooth milk pumping session, please set the suction level according to your
personal preference.
Please off the power before stopping use.
All functions of this product are described in the instruction manual.

Important: The diaphragm, valve, and massage cushion are wear and tear components; if there is any
damage to these parts, please contact our distribution centres to purchase the replacements.
1
1
1
1
1
1
1
1
1
-
-20˚C ~ 100˚C Food Grade
-
--
PP
PP
PP
Silicone
Description of package contents and components
Please check the quantity of the content before use. If there is any missing part, please contact the
seller
PP
ABS
ABS
PP
1
1
1
Silicone
SiliconeMassage Cushion
No. Material
Food Grade
-
-
-
Food Grade
Food Grade
Food Grade
Food Grade
-
Food Grade
RemarkQuantity
-20˚C ~ 120˚C
-20˚C ~ 200˚C
-20˚C ~ 100˚C
-20˚C ~ 80˚C
-20˚C ~ 100˚C
-
-20˚C ~ 80˚C
-20˚C ~ 100˚C
-20˚C ~ 200˚C
-20˚C ~ 100˚C
TemperatureComponent Name
T-joint flange
Travel Cap
Bottle Cap
Charging Cable
USB Adapter
Pump Motor Unit
Lock
Pump Cover
Baby Bottle (160ml)
Valve
Diaphragm

2.96W
1 pcs
5V===1A
Electric Breast
Pump
Description:
Input voltage: Power
consumption:
Package:
Please pay attention to the small accessories, do not lose them, or it may cause installation failure or
malfunction.
Be sure to take apart or install each accessories in order; Except motor unit and power adapter, all
components (bottle, silicone shield, suction cup, dustproof cap, diaphragm, upper cap, suction valve, tube
etc.) can be sterilised after cleaning
Do not immerse the motor unit and power adapter into the water
Please wipe the motor unit with a damp cloth after every use.
Clean caution
Operating instruction
On/off, mode change, nipple correction button : Press and hold the button for 1.5s to turn on or
turn off the appliance, only press the button for pumping mode change or nipple correction. The device will
turn off automatically after 30 mins’ working (since the last operation)
Pumping mode change: Press power button to change modes; Stimulation, massage and nipple correction.
Stimulation mode change into expression mode automatically after 2 mins of operation
Nipple Correction Mode - Suitable for postpartum nipples that are flat or invaginated and cannot
feed baby directly (do not use it during pregnancy). This mode has three levels of adjustable suction power. It
can correct the nipple gently and help the mother to feed the baby directly.
Suction increase / reduce - increase / decrease the suction level (total 9 levels, the 9th level is the strongest.)
Low battery indicator - the indicator flash when the battery is less than 30%
Note: The appliance will turn off automatically after 30 mins of operation
Suction reduce button
On/Off button
Mode change
Nipple correction
Suction increase button
Suction level indicator
Expression mode indicator
Battery indicator
Stimulation mode indicator
Front light
Showing working status
Specification

Indicator light
Battery indicator
light flashing
Battery indicator
light flashing
Battery indicator light
Level indicator light, no display of battery indicator
Normal
Operation
Low Battery
When Charging
Full Power
Status
Plug-In Wse
Fully charged
Level indicator
Level indicator
light off
Level indicator
light off
Power off In normal
Expression/
Stimulation
In normal
nipple tractor
mode
Low battery
indicator light
flashes
Charging
status
indicator light
flashes
Fully charged
indicator light
Plug-in use
Expression/
Stimulation
Battery indicator status
Operation instruction
Relax in a comfortable chair, leaning slightly forward
Press the assembled pump body against your breast. Make sure your nipple is centred so that the massage
cushion creates an airtight seal.
Hold the power button for 1.5s to turn on the breast pump, and it starts up in stimulation mode level 1. Press the
switch button to change the pumping mode. Stimulation mode will change to Expression mode automatically
after 2 minutes. You can adjust the vacuum level by pressing the +/- button. (There are 9 levels for adjustment.)
How to find your comfortable expression level?
Increase the expression level until you feel slightly uncomfortable (not painful), then decrease slightly.
To end the session, press and hold the power button to switch off; the status light will automatically turn off.

Product assembling sequence
Insert the massage cushion into the T-joint flange and press the rim to ensure a perfect seal. (pic. 1)
Put the silicone diaphragm onto the T-joint flange and press the rim to ensure a perfect seal. (pic. 2)
Insert the valve under the T-joint flange, push it until it fits tightly. (pic. 3)
Firmly push the motor unit onto the diaphragm, turn it clockwise to the position where the motor unit is aligned
with the pump body, then lock the motor unit by pushing the lock down. (pic. 5)
Put on the pump cover (Please remove the pump cover when using it, and put it on when storing). (pic. 6)
Note: Check all the components are correctly assembled to ensure a perfect seal state before each use.