baby express be nude pro User manual

User's Guide
be nude pro Wearable Breast Pump
Please read this user's guide carefully before using

Silicone Diaphragm
Flange Cover
Pump Motor
Silicone Flange 24mm
(Silicone Flange 27mm sold separately)
Silicone ValveCharging Cable
Collection Cup
Description of Package Contents
Please check the quantity of the content before use. If there is any missing part, please contact the seller
Bra Extender
Note : Pump motor is not water proof. Do not wash with water or have it come in contact with any liquid.

Power button / Mode change : Press and hold to on / off, short press to change mode
Stimulation / Expression mode : 2 essential modes for pumping
Lactating mode : Combination of 3 short and 1 long suction
Auto mode : Combination of 5 short and 10 long suction
Suction increase/reduce button : increase/reduce suction level (total 12 levels per mode)
Suction level : Indicates the level of suction
Battery indicator : Red light when low battery (<20 mins), flashing red light when battery flat,
green light when fully charged
Note
The appliance will turn off automatically after 20mins of operation
Full charge takes about 2.5 hours. Avoid overcharging.
Power adaptor excluded. Compatible with Output 5V 1A .
Operation Panel
Power button/ Mode change
Expression mode
Stimulation mode
Auto mode
Lactating mode
Suction increase buttonSuction decrease button
Suction Level
Battery indicator

Assembly Sequence
Put the silicone valve into the collection cup.
Fit the silicone flange onto the collection cup and
ensure it is properly sealed. Align top opening.
Ensure flange is properly closed along all sides.
Insert the diaphragm into the collection cup. Press it
down to ensure it sits in properly.
Sit the pump motor onto the collection cup.

Breast pump parts are recommended to wash, sterilise and dry before and after every use.
Take apart all accessories when cleaning and sterilising. Allow accessories to cool for 20 mins
before assembling to avoid damage.
Wipe motor, especially the bottom with damp cloth.
When cleaning the silicone parts, please be gentle. If damaged, it will affect
the suction and function of the breast pump.
Remove motor to pour out milk, to prevent liquid entering motor.
Put the assembled pump firmly onto your
breast. Ensure that the nipple is aligned in the
centre. Keep the pump upright at all times.
Tip: Use one hand to hold your breast while
the other to put the pump on.
Use the bra extender with your nursing bra to
fit the pump. Ensure that the pump sits firmly
on your breast.
Tip: Use the bra extender to prevent
damaging your bra by over stretching it.
Wearing the pump
Cleaning

Avoid over pumping to prevent breast/nipple injuries. Please seek medical advice if breast becomes
painful because of using the breast pump.
To have a smooth pumping session, please set the mode and suction level according to your personal
preference. You may use either one or both (stimulation/expression) modes, depending on individual.
Turn off the power before removing the pump from your breast.
All function of this product are described in the user's guide.
Always check the breast pumps and components for wear and damage before use. Replace
immediately if damaged. Regular replacement is required due to wear and tear.
Breast pump parts are recommended to be washed and sterilised before and after every use.
Refrigeration between pump is highly not recommended.
Do not use this product for other intentions not indicated in this guide.
Ensure the opening on the silicone flange is aligned on top to prevent leaking.
Note
Download and install app on phone.
Turn on bluetooth and allow app usage on phone and launch app.
Inside app, select 'Device' (bottom left icon), click '+' to search/add device.
Turn breast pump motor on to activate pairing mode.
Select 'breast pump' on phone screen to connect.
App Pairing
Breast pump and app must be within 10m to stay connected.