Baby Trend Nursery Center User manual

Convenience through innovation and thoughtful design
Instruction Manual
Read all instructions BEFORE assembly and USE of product.
KEEP INSTRUCTIONS FOR FUTURE USE.
11.09
www.babytrend.com
Convenience through innovation and thoughtful design
IF YOU EXPERIENCE ANY DIFFICULTY IN USING THIS PRODUCT,
PLEASE CONTACT OUR CUSTOMER SERVICE DEPARTMENT AT
1-800-328-7363 BETWEEN THE HOURS OF 8:00 A.M. AND 4:30 P.M. PACIFIC
STANDARD TIME FOR ASSISTANCE. PLEASE HAVE YOUR MODEL NUMBER AND
MANUFACTURING DATE AVAILABLE WHEN YOU CALL. THIS INFORMATION CAN BE
FOUND ON A SMALL STICKER UNDER THE PLAYARD.
Contact us by phone:
1-800-328-7363 (8:00am ~ 4:30pm PST)
or online http://www.babytrend.com
Contact us by mail:
Baby Trend, Inc.
1607 S. Campus Ave., Ontario, CA 91761
Mini Playard with Close N Cozy
Nursery Center
Playard (fully assemble) x 1
Mattress x 1
---------------------------------------------
Travel / Storage Bag x 1
Close N Cozy
Soft Goods x 1
Strap Set x 1
Mattress Support Bar x 2
Lower Bar x 2
Center Cross Bar x 1
Upper Back Bar x 1
Upper frame x 2
Side frame x 2
Leg x 4
Screw x 4
Item#: PY90918
Check that you have all the below parts for this model
before assembling the playard.

1Copyright © 2009 - 2010, Baby Trend Inc., All Rights Reserved.
Copyright © 2009 - 2010, Baby Trend Inc., All Rights Reserved. 2
WARNING: NEVER LEAVE INFANT IN
PRODUCT WITH SIDES DOWN.
Infant may roll into space between pad and
loose mesh side causing suffocation.
WARNING:
Infants can suffocate:
• In gaps between a mattress too small or too thick and product sides
• On soft bedding
Never add a mattress, pillow, comforter, or padding.
Use only the mattress provided by manufacturer.
Never use a water mattress with this product.
WARNING: See playard oor and side rails for warnings.
WARNING: Failure to follow these warnings and the
instructions could result in serious injury or death.
• The playard, including side rails, must be fully erected prior to use. Make
sure latches are secure.
• Strings can cause strangulation! NEVER place items with a string around
a child's neck such as hood strings or pacier cords. NEVER suspend
strings over playard or attach strings to toys.
• Discontinue use of the product when child is able to climb out or has
reached the height of 35 in. (890 mm) or weight of 30 lbs. (14 kgs),
whichever comes rst.
• When child is able to pull to standing position, remove bumper pads, large
toys and other objects that could serve as steps for climbing out.
• NEVER place product near a window where cords from blinds or draps
can strangle a child.
• Always provide the supervision necessary for the continued safety of your
child. When used for playing, NEVER leave child unattended.
• To reduce the risk of SIDS, pediatricians recommend healthy infants be
placed on their back to sleep, unless otherwise advised by your physician.
Contact us by phone:
1-800-328-7363 (8:00am ~ 4:30pm PST)
or online http://www.babytrend.com
Contact us by mail:
Baby Trend, Inc.
1607 S. Campus Ave., Ontario, CA 91761
WARNINGWARNING
• NEVER use this product if there are any loose or missing fasteners, loose
joints, broken parts, or torn mesh/fabric. Check before assembly and
periodically during use. Contact Baby Trend Customer Service at
1-800-328-7363 for replacement parts, repair or instructions. NEVER
substitute parts.
• NEVER leave child in product with sides lowered. Be sure sides are in
raised and locked position whenever child is in product.
• NEVER use plastic shipping bags or other plastic lm as mattress covers
not sold and intended for that purpose. They can cause suffocation.
• This product is not intended for commercial use.
MAINTENANCE AND CLEANING INSTRUCTIONS:
Use only household mild soap and warm water.
DO NOT USE BLEACH.
DO NOT MACHINE WASH.
If you experience any difculty with the use of our product or have a
question regarding these instructions, please contact our Customer
Service Department at 1-800-328-7363 between the hours of
8:00 a.m. and 4:30 p.m. (PST). Please do not return the product to the
store as once it is returned it cannot be re-sold and the materials and
energy used to make it are wasted.

Copyright © 2009 - 2010, Baby Trend Inc., All Rights Reserved.
Copyright © 2009 - 2010, Baby Trend Inc., All Rights Reserved.
PARTS
TO ASSEMBLE PLAYARD
ATTENTION:
Playard must be fully assembled and securely
locked before installing or using other accessories.
1. Unzip bag and remove Playard frame (Fig. 1).
Undo the three (3) Fasten straps and set the
Mattress aside.
2. DO NOT push center down yet.
3. Top rails must be fully erected before lowering
center. Pull up one rail at a time, hold one hand
on each side of the rail and pull up sharply, do
not pull from the middle where the center latch
release is located, make sure both tubes latch in
place and each rail is rigid. (Fig. 2).
IMPORTANT: The center must be raised
while locking the rails. If one rail will lock
but the other side will not then, unlock the rail
by squeezing the release in the center and try
again.
4. Once all four (4) top rails are locked in place,
push down on the center handle (Fig. 3). The
center mechanism will rotate clockwise 90
degrees and automatically lock in place.
3. To operate the brakes on the Wheels, press
downward on the brake levers. To release, lift
upward on the lever (Fig. 4)
ASSEMBLY
34
Playard
Mattress
Travel / Storage Bag
PLAYARD
Check the parts list to make sure you have all the parts
for this model before assembling the playard.
IMPORTANT! To ensure safe operation of your playard,
please follow these instructions carefully. Please keep these
instructions for future reference.
IMPORTANT! Before assembly and each use, inspect this
product for damaged hardware, loose joints, missing parts or sharp
edges. NEVER use if any parts are missing or broken.
IMPORTANT! Adult assembly is required.
Playard
Mattress
Fig. 1
Fig. 2
Fig. 3

Copyright © 2009 - 2010, Baby Trend Inc., All Rights Reserved.
Copyright © 2009 - 2010, Baby Trend Inc., All Rights Reserved.
ASSEMBLY ASSEMBLY
56
IMPORTANT: Test each top rail by pushing
down slightly to conrm each is rigid and
locked securely in place before use. (Fig. 4)
5. Place the Mattress on the oor of the Playard
with the padded side facing up. (Fig. 5)
6. Insert the three (3) Velcro® straps located on
the underside of the Mattress through the slots
in the oor of each end of the Playard (Fig.
6). Fasten the hook and loop straps to the
underside of the Playard oor to prevent the
Mattress from moving. (Fig. 7)
IMPORTANT: The handle located in the
center of the Playard oor MUST remain raised
(Approx. 45.7 cm or 18 inches) while locking
the side rails in place. If the center is not raised
the rails will NOT lock.
If you experience difculty and one side of the
rail will lock but the other side will not then,
unlock the rail by squeezing the release in the
center and try again. If you still have difculty,
contact our Customer Service Center at
1-800-328-7363 or visit us online at
www.babytrend.com.
7. To operate the brakes on the Wheels, press
downward on the brake levers. To release, lift
upward on the lever. (Fig. 8)
FOLDING PLAYARD
1. Release the three (3) Velcro® straps holding
the Mattress from underneath the Playard oor
or the Bassinet and set the mattress aside.
2. Do not unlock top rails yet, center of oor must
be raised before top rails will unlock.
3. Rotate the center handle counter-clockwise
90 degrees and raise the center as high as the
top rails (Fig. 9). Gather the Legs and Wheels
together towards the center as close as possible
so that they nearly touch.
4. Locate the rail latch release in the center and
bottom side of each rail. Squeeze the lever
with two hands until the rail releases the
two tubes (Fig. 10), then push down (Fig.
11). NOTE: If the top rail(s) do not release
completely, DO NOT FORCE! Lift the center
of oor higher. Both tubes must be released
for the top rail to fold.
5. Gather four (4) corners and center all together
tightly (Fig. 12). Wrap Mattress around
Playard frame with padded side facing inward.
Secure the three (3) hook and loop straps by
feeding them through the loops on the end
of the Mattress and folding them back onto
themselves.
6. Wrap Mattress around Playard frame with
padded side facing inward.
7. Secure the three (3) hook and loop straps by
feeding them through the loops on the end
of the Mattress and folding them back onto
themselves. (Fig. 13)
8. Place folded Playard into carry bag so that the
handle comes through the opening between
each side of the zipper.
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Rotate before
lifting
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
PRESS TO
UNLOCK
TubeTube
TOP RAIL
Latch
Release

WARNING
Copyright © 2009 - 2010, Baby Trend Inc., All Rights Reserved.
Copyright © 2009 - 2010, Baby Trend Inc., All Rights Reserved.
7
WARNING: Failure to follow these warnings and the
instructions could result in serious injury or death.
FALL HAZARD: To help prevent falls, do not use this
product when the infant begins to push up on hands and knees or
has reached the height of 25 in. (635 mm), weight of 15 lbs. (6.8 kgs)
or 4 months old, whichever comes rst.
SUFFOCATION HAZARD : Infants can suffocate
• In gaps between an extra pad and sides of the bassinet/cradle
• On soft bedding
Never add a mattress, pillow, comforter, or padding.
Use only the pad provided by manufacturer.
Never use a water mattress with this product.
• To reduce the risk of SIDS, pediatricians recommend healthy infants be
placed on their back to sleep, unless otherwise advised by your physician.
• If a sheet is used with the pad, use ony the one provided by the bassinet
or cradle manufacturer or one specically designed to t the dimension of
the bassinet or cradle mattress.
• Strings can cause strangulation! NEVER place items with a string around
a child's neck such as hood strings or pacier cords. NEVER suspend
strings over bassinet or attach strings to toys.
• Discontinue use of the bassinet when child begins to push up on hands and
knees or has reached the height of 25 in. (635 mm), weight of 15 lbs. (6.8
kgs) or 4 months old, whichever comes rst.
• NEVER place product near a window where cords from blinds or drapes
can strangle a child.
• Always provide the supervision necessary for the continued safety of your
child. NEVER leave child unattended.
• NEVER use plastic shipping bags or other plastic lm as mattress covers
not sold and intended for that purpose. They can cause suffocation.
• Use bassinet with only one child at at time.
• NEVER place a child under the bassinet.
• NEVER store the bassinet in the playard while in use.
• The bassinet must be fully assembled and installed before using.
Contact us by phone:
1-800-328-7363 (8:00am ~ 4:30pm PST)
or online http://www.babytrend.com
Contact us by mail:
Baby Trend, Inc.
1607 S. Campus Ave., Ontario, CA 91761
8
PARTS
Close N Cozy Bassinet
Soft cover
Side Basket
Strap set
Mattress support bars
Center cross bar
Legs
Lower front & back bar
Upper left frame
Upper back bar
Upper right frame
Screws
Right side frame
Left side frame

Copyright © 2009 - 2010, Baby Trend Inc., All Rights Reserved.
Copyright © 2009 - 2010, Baby Trend Inc., All Rights Reserved.
10
9
ASSEMBLY
IMPORTANT! To ensure safe operation of your bassinet,
please follow these instructions carefully. Please keep these instructions
for future reference.
IMPORTANT! Before assembly and each use, inspect this
product for damaged hardware, loose joints, missing parts or sharp
edges. NEVER use if any parts are missing or broken.
IMPORTANT! Adult assembly is required.
TO ASSEMBLE Close N Cozy
BASSINET
WARNING: This product
must be fully assembled before use.
STEP 1:
Connect the LEGS (4ea.) to the side frame corners
by inserting each leg into the round hole and
pushing rmly into place. (Fig. 34) Check to make
sure each leg is securely connected by pulling
on it.
STEP 2:
Connect the center CROSS bar by lining up the
two side frames and inserting each end of the bar
into the housing. Line up snap-pins on all bars
with the holes in the housing and “snap” into
place. (Fig. 35)
IMPORTANT: Never loosely connect any parts
of the frame.
STEP 3:
Connect the upper LEFT frame section to the left
side frame by inserting the bars into the housing
and frame corner as shown.The snap-pin on the
curved bar should be facing outward. (Fig. 36)
Repeat for the other side.
Fig. 34
Fig. 35
Cross Bar
STEP 4:
Connect the upper BACK bar by lining up the
snap-pins with the holes in the housings and insert
into the upper left and right frame housings.
(Fig. 37)
STEP 5:
Soft Cover with Back Panel
Insert the lower BACK bar through the back panel
of the soft cover as shown as Fig. 38.
STEP 6:
Slip soft cover onto and over frame. (Fig. 39)
STEP 7:
Insert the lower FRONT bar through the round,
padded sleeve on the front of the soft cover.
(Fig. 40)
ASSEMBLY
Fig. 36
Fig. 37
Fig. 38
Fig. 39
Back Bar
Fig. 40
Lower bar

Copyright © 2009 - 2010, Baby Trend Inc., All Rights Reserved.
Copyright © 2009 - 2010, Baby Trend Inc., All Rights Reserved.
12
11
ASSEMBLY ASSEMBLY
STEP 8:
Connect the lower BACK to the frame corners by
slightly spreading the side frames and inserting
the bar into holes. Then connect the lower FRONT
bar. Secure the Front and Back Bar using the
screws provided. (Fig. 41)
Note: The holes in the bar and the housing must
line up in order to insert the screws and properly
connect.
STEP 9:
Connect the soft goods to the frame by turning
the frame over and zipping closed all three (3)
zippers.
STEP 10:
Insert the mattress support bars by sliding one end
of the bar through the pocket and back through the
opposite side. (Fig. 42)
Note: Do not use this product without the support
bars securely in place.
STEP 11:
Insert mattress and position mattress in place.
(Fig. 43) Using the full size playard mattress, fold
in half and insert mattress with fastening strips
facing front side of bassinet. Feed fastening strips
through provided slots and secure the strips to
velcro located on the bottom of the bassinet.
(Fig. 44)
Your Close N Cozy bassinet is now ready to use.
Fig. 42
Fig. 41
FALL HAZARD: NEVER
place Close N Cozy bassinet on an
uneven or elevated surfaces.
WARNING:
SUFFOCATION
HAZARD:NEVER place pillows,
quilts, comforters, sheepskins, pillow-
like stuffed toys and other pillow like
products in the Close N Cozy bassinet.
IMPORTANT! Cover
infant with a thin covering, such as
a crib blanket, receiving blanket or
other blankets specically designed
for infants, only reaching as far as
baby's chest, and tuck the covering
around the mattress.
Attach Close N Cozy to
playard
ATTENTION:
Before installing Close N Cozy bassinet, remove
ALL accessories from playard. (Canopy, bassinet,
changing table, mobile and music box.....)
Hold Close N Cozy bassinet over playard. Line
up the frame corners over the top rails of the
playard and push rmly downward. Make sure
all four frame corners are attached to the playard's
top rails (Fig. 45).
Fig. 44
Fig. 43
Fig. 45

Copyright © 2009 - 2010, Baby Trend Inc., All Rights Reserved.
Copyright © 2009 - 2010, Baby Trend Inc., All Rights Reserved.
14
13
ASSEMBLY ASSEMBLY
Attach playard w/ Close N
Cozy to bed
WARNING:
STRANGULATION /
SUFFOCATION HAZARD:
The top rail of the playard must
be at or below the top of the adult
bed mattress when used with
Close N Cozy.
WARNING:
STRANGULATION HAZARD:
When anchor buckle and strap
assembly is not in use, store in a
safe place not accessible to children.
1. Separate mattress from box spring.
2. Position Playard on the desired side of the bed.
3. With hooks positioned on the same side of the
playard (Fig. 46), layout one strap set UNDER
the bed fame and the other strap set ON TOP of
the box spring. Fully extend both straps to the
opposite the side of the bed. (Fig. 47)
4. Attach the strap hooks to the playard legs by
hooking the straps to their corresponding
upper and lower positions at the front of the
playard. (Fig. 48) To tighten the strap hooks,
use the adjustment buckle and make sure the
strap hooks stay in place while completing
steps 5, 6, and 7.
5. Connect the upper and lower strap sets at
the opposite end of the bed by fastening the
anchor buckle. (Fig. 49)
6. Position playard against the edge of the bed.
7. Secure playard against the side of the bed by
tightening the straps as tight as possible. The
playard must be securely positioned against
the bed before use.
Note: Set brake on Playard Wheels by
pressing downward on the brake levers.
Important: Never use the Close N Cozy
feature without the playard securely fastened
to the bed.
8. Place mattress back onto box spring.
Your playard with Close N Cozy feature is now
ready to use.
Fig. 47
Fig. 46
IMPORTANT! Never use this product without the anchor
buckle attached and locked as shown. Failure to use this anchoring
system could result in serious injury or death to the infant. Make sure
all straps are secured and tight. Check straps before each use.
IMPORTANT! Failure to use this securing system will allow
Close N Cozy to move away from adult bed and could result in infant
falling out.
IMPORTANT! NEVER leave infant unattended.
ATTENTION: Before attaching Close N Cozy to playard, you must
1. Playard, including side rails, must be fully erected prior to use. Make sure latches are
secure. Refer to playard's instruction for details.
2. Determine the height of adult bed rst. Place a at object on the top of the adult bed
(including base, springs and mattress) so that a few inches of it pass over the edge of the
adult bed. Messure down from this point to the oor to nd the exact bed height. It is
recommended to use this feature with an adult bed with oor height 24" to 30".
Fig. 49
Fig. 48