Baby Trend HC07A User manual

HC07A/HC07B/HC07C
Instruction Manual
Manual de Instrucciones
Manuel d’instruction
Read all instructions BEFORE assembly and USE of product.
KEEP INSTRUCTIONS FOR FUTURE USE.
Lea todas las instrucciones ANTES de armar y USAR el producto.
CONSERVE LAS INSTRUCCIONES PARA USO FUTURO.
Lisez toutes les instructions du manuel AVANT l’assemblage ou
L’UTILISATION de ce produit. CONSERVEZ CES INSTRUCTIONS
POUR RÉFÉRENCE ULTÉRIEURE.
HC07xxxA_B_C_3L_061920
WARRANTY
DO NOT RETURN YOUR PRODUCT TO THE STORE. PLEASE CONTACT BABY TREND
FOR REPLACEMENT PARTS, SERVICE AND REPAIR.
The Baby Trend® warranty covers workmanship defects within the rst 180 days of
purchase. Any product which has been subjected to misuse, abuse, abnormal use,
excessive wear and tear, improper assembly, negligence, environmental exposure, alteration
or accident, or has had its serial number altered or removed invalidates all claims against
the manufacturer. Any damage to property during installation is the sole responsibility of the
end user. The Customer Service Department can be contacted at 1 [phone] Monday
through Friday between 8:00am and 4:30pm (PST). Return Authorizations are required prior
to returning product(s) to Baby Trend®. Warranty only valid in North America.
GARANTIA
NO DEVUELVA SU PRODUCTO A LA TIENDA. POR FAVOR CONTACTE A BABY TREND
PARA PIEZAS DE REPUESTO, SERVICIO Y REPARACION.
La garantía de Baby Trend® cubre defectos de fábrica dentro de los primeros 180 días de
la compra.Cualquier producto que haya sido sometido a uso indebido, abuso, uso anormal,
desgaste excesivo, montaje incorrecto, negligencia, exposición ambiental, alteración
o accidente, o que ha tenido su número de serie alterado o removido anula todos los
reclamos contra el fabricante. Cualquier daño a la propiedad durante la instalación es
de la exclusiva responsabilidad del usuario nal. El Departamento de Servicio al Cliente
puede ser contactado a 1 [phone] Lunes a viernes entre 8:00am y 4:30pm (PST).
Un numero de autorizacion es requerido antes de la devolución de los producto(s) a Baby
Trend®. Garantia válida sólo en América del Norte.
GARANTIE
NE PAS RETOURNER VOTRE PRODUIT AU MAGASIN. VEUILLEZ CONTACTER BABY
TREND POUR DES PIÈCES DE RECHANGE, ENTRETIEN ET RÉPARATION.
La garantie Baby Trend® couvre les vices de fabrication dans les 180 jours suivant l'achat du
produit. Tout produit qui a été soumis à un usage abusif, une utilisation anormale, une usure
excessive, un montage incorrect, de la négligence, de l'exposition environnementale, de la
modication ou un accident, ou a eu son numéro de série modié ou supprimé annule toutes
les réclamations contre le fabricant. Tout dommage à la propriété lors de l'installation est de
la seule responsabilité de l'utilisateur nal. Le service client peut être contacté au 1 (800)
328-7363 du lundi au vendredi 8 h – 16 h 30 (PST). Une autorisation sera nécessaire avant
de retourner le produit à Baby Trend®. Garantie valable uniquement en Amérique du Nord.
1-800-328-7363
(8:00am ~ 4:30pm PST)
www.babytrend.com
Baby Trend, Inc.
13048 Valley Blvd.
Fontana CA 92335

PARTS
2
Copyright © 2020, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
1Copyright © 2020, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
Seat Back
Height Brackets
Footrest
Seat Pad
*Tray Insert
Legs Extension Tubes (X4) 4 Casters
Tray
Upper Frame Assemblies
Check that you have all the parts for this model before assembly.
BABY TREND®CUSTOMER SERVICE
The Customer Service Department can be contacted
at 1 [phone] Monday through Friday between
8:00am and 4:30pm (PST). Return Authorizations are
required prior to returning product(s) to Baby Trend®.
Warranty only valid in North America.
BABY TREND®SERVICIO AL CLIENTE
El Departamento de Servicio al Cliente puede ser
contactado a 1 [phone] Lunes a viernes entre
8:00am y 4:30pm (PST).Un numero de autorizacion es
requerido antes de la devolución de los producto(s) a
Baby Trend®. Garantia válida sólo en América del Norte.
BABY TREND®SERVICE CLIENT
Le service client peut être contacté au 1 [phone]
du lundi au vendredi 8 h – 16 h 30 (PST). Une autorisation
sera nécessaire avant de retourner le produit à Baby
Trend®. Garantie valable uniquement en
Amérique du Nord.
Seat Base
and seat back
hinge rod
*Type may vary
**May or may not be included
**Body Insert

4
ASSEMBLY
Copyright © 2020, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
WARNING
3Copyright © 2020, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
IMPORTANT! To ensure safe operation of your product, please
follow these instructions carefully. Please keep these instructions for
future reference.
IMPORTANT! Before assembly and each use, inspect this
product for damaged hardware, loose joints, missing parts or sharp
edges. NEVER use if any parts are missing or broken.
IMPORTANT! Adult assembly is required.
IMPORTANT! Always check that the high chair is locked in the
open position before using.
WARNING: Failure to follow these warnings
and the instructions could result in serious injury or
death.
FALL HAZARD: Children have suffered
severe head injuries including skull fractures when
falling from high chairs. Falls can happen suddenly if
child is not restrained properly.
• Always use restraints, and adjust to t snugly.
• Tray is not designed to hold child in chair.
• Stay near and watch child during use.
• Never allow child to push away from table.
STRANGULATION HAZARD:
Do not place High Chair in any location in where there
are cords, such as a window blind cords, drapes,
phone cords etc.
WARNING: The child should be secured in
the high chair at all times by the 5-point restraining
system, either in the reclining, semi-reclining or upright
position. The tray is not designed to hold the child
in the chair. It is recommended that the high chair be
used in the upright position only by children capable of
sitting upright unassisted. See page 10 for instructions
on proper use of restraint system.
• Other accessory items may change the balance of the high chair and cause
hazardous unstable conditions.
• Be certain the high chair is fully erect and latched in the open position before
allowing the child near the high chair.
• This high chair is designed to be used by a child with a maximum weight of 40
pounds, (18.14 kg.)
• NEVER allow your high chair to be used as a toy.
• NEVER use this product if there are any loose or missing fasteners, loose joints,
broken parts, or torn mesh/fabric. Check before assembly and periodically during
use. Contact Baby Trend Customer Service at 1-800-328-7363 for replacement
parts, repair or instructions. NEVER substitute parts.
ATTENTION:
Carefully remove parts from box. Check that
you have all the parts for this model before
assembling the high chair.
NOTE: Certain High Chair models are
packaged with the High Chair Seat Fabric and
Seat Insert already attached to the Seat Back.
TO ASSEMBLE SEAT
1) • First locate the seat base. From the rear
of the seat base, remove the metal hinge
rod from the base (Fig. 1a).
• Press the latch down and slide the rod
out (Fig. 1b).
Fig. 1b
Seat Base
Fig. 1a
Seat Back
Hinge Rod
Hinge rod retainer

56
ASSEMBLY ASSEMBLY
Copyright © 2020, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés. Copyright © 2020, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
2) • Intersect the seat base with the seat back at the joint (Fig 2a). Press the latch
down to insert the hinge rod through the seat back and seat base (Fig. 2b).
NOTE: Firmly slide the rod until it stops (Fig. 2c). Ensure the latch is moved
up to secure rod and seat in place (Fig. 2d).
Fig. 2a
Fig. 2c
Fig. 2b
Fig. 2d
Seat Back
Seat Base
3) • Slide the left and right sides’ Height Bracket onto the Seat Base (Fig. 3a).
Lock the brackets in place (Fig. 3b).
4) • Slide the Footrest onto the Seat Base (Fig. 4). Lock Footrest into place.
5) • Insert the front tube of the right and left side Upper Frame Assemblies into
the Height Adjuster (Fig. 5). The front tube is easily distinguished from the
rear tube by the array of holes located on the backside of the front tube.
Fig. 3a
Height Bracket
Height Bracket
Fig. 3b
Fig. 4 Fig. 5
Footrest
Upper Frame Assembly
Height Bracket
Release Handle

78
ASSEMBLY ASSEMBLY
Copyright © 2020, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés. Copyright © 2020, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
6) • Squeeze the Release Handles on both
sides simultaneously and push the tube
through the Height Adjusters until it locks
in the highest position (Fig. 6).
7) • Connect the Front and Rear Legs to the
Upper Frame Assemblies by inserting the
tube ends into the extension tubes (Fig. 7).
NOTE: Legs are properly connected
when the lock buttons are lined up with
the holes on the ends of the Upper Frame
Assemblies. Make sure the lock buttons
are engaged before use.
8) • Attach each of the Casters to the high
chair legs (Fig. 8). Snap casters into
Bottom of the leg.
NOTE: Check that all four Casters are
securely fastened to the High Chair.
Fig. 6
Release Handle
Fig. 7
Fig. 8
Lock Buttons
Fig. 9b
Fig. 9c Fig. 9d
9) • Loop the ap on the back of the pad over the top of the Seat Back. Connect
the Seat Pad to the Seat Back with the two Elastic Loops. These t over the
Attachment Tabs located near the top harness slots (Fig. 9a).
• Attach the bottom of Seat Pad to the Seat Base with the two Elastic
loops located at the rear of the bottom of the Seat Pad. These t over the
Attachment Tabs located on the Seat Base near where the Seat Back and
Seat Base Join (Fig. 9b).
• Attach each anchor hook of the Seat Pad to the side of the seat armrest
(Fig. 9c). Ensure that the slot of the anchor hook slides through the under
side division (Fig. 9d).
Fig. 9a

910
ASSEMBLY ASSEMBLY
Copyright © 2020, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés. Copyright © 2020, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
TO ATTACH TRAY
WARNING: Always check
that the high chair is locked in
the open position before using.
WARNING: The tray is
not designed to hold the child
in the chair. The child should
be secured in the high chair
at all times by the 5-point
restraining system, either in
the reclining, semi-reclining or
upright position.
10) • To attach the Tray, line up the grooves on
the bottom of the tray with the armrests of
the high chair. Squeeze the Tray’s release
handle and slide the tray onto the armrests
(Fig. 10a). The Tray has a 3-position
adjustment. To adjust the position,
squeeze the Tray’s release handle located
underneath the tray and reposition the tray
to the desired position (Fig. 10b). Release
the Tray’s handle. Check that the Tray is
securely locked in its new position.
TO ATTACH TRAY INSERT
11) • The dishwasher safe food Tray Insert
snaps onto the High Chair Tray and is held
in place by tabs on the sides of the Tray.
When installing the Tray Insert make sure
that its snaps into place to prevent the child
from removing the Tray Insert. To remove
Insert, unsnap the tabs from the Tray.
• The Tray may be stored on the back legs
of the High Chair. Align the holes in the rear
of the tray with the small pegs on the back
legs (Fig. 11).
Fig. 11
Fig. 10b
3-position
Tray Release located underneath tray
Fig. 10a
TO USE SAFETY BELT
WARNING: It is recommended
that only children capable of sitting
upright unassisted use the high
chair in the upright position.
WARNING: Prevent serious
injury or death from falls or sliding
out. Always use the restraint
system. The child should be
secured in the high chair at all
times by the 5-point restraining
system, either in the reclining,
semi-reclining or upright position.
12) • The shoulder straps of the 5-point harness have
2 attachment positions. Select the position that
places the shoulder strap level with, or below, the
top of the child’s shoulders (Fig. 12a).
• Carefully place the child in the seat and position
the safety harness around the child’s waist
and over the shoulders. Place the crotch strap
between the child’s legs. Insert the male end of
each shoulder/waist belt into the buckle on the
crotch strap. Tighten the harness to be snug
around the child’s waist and over the child’s
shoulders (Fig. 12b).
TO RELEASE SAFETY BELT
13) • Push Button on Center Clasp, the two Harness
Buckles will pop free (Fig. 13).
RECLINE SEAT
14) • Squeeze recline lever on back of the seat and
adjust to the preferred recline or upright position
(Fig. 14).
Use caution not to trap arms, hands and ngers
when adjusting recline positions.
Fig. 13
Fig. 14
Fig. 12b
Adjust for a snug t
Center Clasp
Fig. 12a

11 12
OPERATION OPERATION
Copyright © 2020, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés. Copyright © 2020, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
TO ADJUST SEAT HEIGHT
WARNING: Do not
adjust seat height with child in
seat. Adjust seat height before
placing your child in the high
chair.
WARNING:
Always check that the height
adjustment bracket is level and
both left and right sides locked
before placing child in the high
chair.
WARNING: Never rest
the height adjustment bracket
on the locking pins.
15) • Squeeze the Release Handles on both
sides simultaneously of the Height
Adjustment (Fig. 15a) and adjust to the
ideal position (Fig. 15b).
DO NOT adjust with child in the seat.
ATTENTION:
Make sure the Height Brackets lock on the lowest
position. DO NOT rest Height Adjustment Brackets
on the Locking Pins (Fig. 15c).
BRAKES
16) • To engage brakes, apply downward
pressure to the brake tabs (Fig. 16).
NOTE: Check that the High Chair will
not move and that brakes are properly
applied.
• To release, lift up on the brake tabs.
Fig. 15a
Fig. 15b
Fig. 15c
Release Handle
TO FOLD HIGH CHAIR
The High Chair may be folded with the seat in
any of the height positions.
17) • Place seat in the desired height position.
Place Seat Back in the most upright
position (Fig. 17).
18) • Squeeze the tray release handle and
slide the tray out (Fig. 18).
19) • Hang the tray on the hooks located on
the back of the rear leg (Fig. 19).
20) • Pull upward on the release levers
(located on the sides of the frame) and
push the rear legs in the direction of the
front legs until folded (Fig. 20). Chair is
now ready to put away.
DO NOT allow your child to play around a
folded high chair as it may fall.
TO UNFOLD HIGH CHAIR
Read the Warning and see (Fig. 20), then
Reverse the steps above.
WARNING: Do not sit
on the frame when the seat is
not attached. Do not use frame
as a foot stool. Potential pinch
point when opening the frame.
Fig. 17
Fig. 19
Tray Release located underneath tray
Fig. 20
Fig. 18
DO NOT place
ngers here.
Highest Position
Lowest Position
Locking Pin
Fig. 16

13 14
OPERATION OPERATION
Copyright © 2020, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés. Copyright © 2020, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
TODDLER SEAT ASSEMBLY
ATTENTION:
Recommended age for Toddler Seat use is
2-4 years of age.
Always assist your child into and out of the
seat.
Before using the toddler seat, remove tray
(step 16), lock wheels (step 18), before
using toddler seat.
21) • Completely remove the harness and
buckle from the product by threading
the strap ends through the seat back
(Fig. 21a).
• Remove extension tubes from the
front and rear legs by pushing the
locking pins in and pulling tubes (Fig.
21b).
• Reassemble the Front and Rear
Legs by inserting the tube ends into
the Upper Frame Assemblies (Fig.
21c).
NOTE: Legs are properly connected
when the locking pins are lined up
with the holes on the ends of the
Upper Frame Assemblies. Make sure
the locking pins are engaged before
use.
Fig. 21b
Fig. 21a
Fig. 21c
TO REATTACH SEAT PAD
NOTE: Certain High Chair models are
packaged with the High Chair Seat Pad and
Seat Insert already attached to the Seat Back.
22) • Thread non-buckle end of Harness
Straps called Harness Attachment
Tabs through the provided slots in
the Seat Fabric, Seat Insert, Seat
Back, and Seat Base (Fig. 22). When
Harness Attachment Tabs are through
the provided slots, rotate the Harness
Attachment Tabs 90 degrees. Make sure
that the straps are rmly in place.
23) • Loop the ap on the back of the pad
over the top of the Seat Back. Connect
the Seat Pad to the Seat Back with the
two Elastic Loops. These t over the
Attachment Tabs located near the top
harness slots (Fig. 23).
24) • Attach the bottom of Seat Pad to the
Seat Base with the two Elastic loops
located at the rear of the bottom of the
Seat Pad. These t over the Attachment
Tabs located on the Seat Base near
where the Seat Back and Seat Base
Join (Fig. 24a).
Fig. 22
Fig. 23
Fig. 24a

15 16
MAINTENANCE
Copyright © 2020, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés. Copyright © 2020, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
• Attach each anchor hook of the Seat
Pad to the side of the seat armrest
(Fig. 24b).
• Ensure that the slot of the anchor hook
slides through the under side
division (Fig. 24c).
TO REMOVE SEAT PAD
Reverse the previous steps.
OPTIONAL SEAT INSERT
25) • Set Seat Insert onto Seat Pad.
See step 22.
Fig. 25
Fig. 24b
Fig. 24c
CARE AND MAINTENANCE
WARNING: Harness Straps and Basket are
NOT washable.
Dishwasher Safe Tray Insert: The Tray Insert is dishwasher safe to 160º F (71º C).
Do not use scouring pads on the Tray Insert as they will damage the surface and
the Tray Insert will become more difcult to clean.
High Chair/Tray: Use mild soap and wash with damp cloth. Please use only a soft
bristle brush, sponge or cloth to clean the surface or remove particles of food. DO
NOT submerge High Chair and Tray in water. Surface clean only.
Seat Pad and fabrics (please refer to the care label on indiviadual soft good
pieces for cleaning instructions).
To remove the seat pad:
Remove Harness Straps by pushing Harness Attachment Tabs through the
Harness slots on the Seat Back, Seat Base and Seat Pad. Remove Elastic Loops
from Attachment Tabs on Seat Base and Seat Back.
To attach the seat pad:
Carefully follow the instructions outlined in Step 22 on how to correctly re-thread
the safety harness.
OPERATION

PIEZASPIEZAS
17 18
Copyright © 2020, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés. Copyright © 2020, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés. 18
ADVERTENCIA
Respaldo del asiento
Palomillas para
soporte de altura
Reposapiés
Almohadilla del
asiento
*Separador de bandeja
Patas
Bandeja
Conjunto de
marco superior
Verique que tenga todas las piezas para este modelo antes de montar.
Base del asiento y
varilla de bisagra
del respaldo
del asiento
*El tipo puede variar
**Puede o no estar incluido
**Accesorio Corporal
ADVERTENCIA: La inobservancia de las
advertencias e instrucciones podría causar lesiones
graves o la muerte.
RIESGO DE CAÍDAS: Hay niños que han
sufrido lesiones de cabeza graves, incluidas fracturas de
cráneo por caer de sillitas altas. Las caídas pueden ser
repentinas si el niño no está sujetado correctamente.
• SIEMPRE use las sujeciones y ajústelas de manera ceñida.
• La bandeja no fue diseñada para sostener al niño en
la silla.
• Manténgase CERCA y vigile al niño durante su uso.
• NUNCA permita que el niño se empuje para apartarse
de la mesa.
PELIGRO DE STRANGULAMIENTO:
No coloque la sillita alta en ningún lugar donde haya
cordones, tales como cordones de cortinas, persianas,
cables de teléfono, etc.
ADVERTENCIA: Todo el tiempo que esté en
la silla alta, el niño debe estar protegido por el sistema
de sujeción de 5 puntos, en la posición reclinable,
semirreclinable o erguida. La bandeja no está diseñada
para contener al niño en la silla. Se recomienda que la
silla alta se utilice en la posición erguida sólo si el niño
puede sentarse erguido sin ayuda. Consulte la página
26 para obtener instrucciones sobre el uso correcto del
sistema del cinturón de seguridad.
• Otros elementos adicionales pueden alterar el equilibrio de la silla alta y crear
una condición inestable peligrosa.
• Asegúrese de que la silla alta esté completamente erguida y trabada en la
posición abierta antes de que el niño se acerque a ésta.
• Esta sillita alta fue creada para ser usada por un niño con un peso máximo de 40
libras (18.14 kg).
• NUNCA deje que la silla alta se utilice como un juguete.
• NUNCA utilice este producto si hay sujeciones sueltas o ausentes, uniones
ojas, piezas rotas o si la tela o la malla están rasgadas. Revise antes de
armar y en forma periódica durante el uso. Si necesita repuestos, reparación o
instrucciones, llame al servicio de atención al cliente de Baby Trend al 1-800-
328-7363. NUNCA reemplace piezas.
Tubos de extension (X4) 4 Rueditas