Baby Trend Smart STEPS My First Rocker 2 User manual

RK02XXXA_2L_100722
Read all instructions BEFORE assembly and USE of product.
KEEP INSTRUCTIONS FOR FUTURE USE.
Lea todas las instrucciones ANTES de armar y USAR el
producto. CONSERVE LAS INSTRUCCIONES PARA USO FUTURO.
My First Rocker 2 Bouncer
1-800-328-7363
(8:00 a.m. ~ 4:30 p.m. PST)
www.babytrend.com
Baby Trend, Inc.
13048 Valley Blvd.
Fontana CA 92335
Instruction Manual
Manual de Instrucciones RK02XXXA

Copyright © 2022, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Copyright © 2022, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
WARRANTY
DO NOT RETURN YOUR PRODUCT TO THE STORE. PLEASE CONTACT
BABY TREND® FOR REPLACEMENT PARTS, SERVICE AND REPAIR.
The Baby Trend® warranty covers workmanship defects within 1 year of purchase. Any
product which has been subjected to misuse, abuse, abnormal use, excessive wear and
tear, improper assembly, negligence, environmental exposure, alteration or accident,
or has had its serial number altered or removed invalidates all claims against the
manufacturer. Any damage to property during installation is the sole responsibility of
the end user.
Customer Service Department can be contacted at 1 [phone] Monday through
Friday between 8:00 a.m. and 4:30 p.m. (PST). Return Authorizations are required
prior to returning product(s) to Baby Trend®. Please visit http://babytrend.com/pages/
limited-warranty for complete warranty details.
GARANTIA
NO DEVUELVA SU PRODUCTO A LA TIENDA. POR FAVOR CONTACTE A
BABY TREND® PARA PIEZAS DE REPUESTO, SERVICIO Y REPARACION.
La garantía de Baby Trend® cubre defectos de fábrica por 1 año después de la
compra. Cualquier producto que haya sido sometido a uso inadecuado, abuso, uso
anormal, desgaste excesivo, montaje incorrecto, negligencia, exposición ambiental,
alteración o accidente, o cuyo número de serie haya sido alterado o removido, anula
todos los reclamos contra el fabricante. Cualquier daño a la propiedad durante la
instalación es la exclusiva responsabilidad del usuario final.
El Departamento de Servicio al Cliente está disponible llamando al 1 [phone],
de lunes a viernes de 8:00 a.m. a 4:30 p.m. (PST). Se requiere una Autorización de
Devolución antes de poder devolver el o los productos a Baby Trend®. Visite http://
babytrend.com/pages/limited-warranty para conocer todos los detalles de la garantía.
Baby Trend, Inc. 13048 Valley Blvd. Fontana CA 92335
1-800-328-7363 • (8:00am ~ 4:30pm PST)
www.babytrend.com

WARNING WARNING
21 Copyright © 2022, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Copyright © 2022, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
WARNING! Not intended for infant sleep and
should never be used for this purpose.
FALL HAZARD: Babies have suffered skull
fractures falling while in and from Bouncers/Rockers.
• Use Bouncer/Rocker ONLY on oor.
• ALWAYS use restraints. Adjust to t snugly.
• NEVER lift or carry baby in Bouncer/Rocker.
SUFFOCATION HAZARD: Babies have
suffocated when Bouncers/Rockers tipped over on
soft surfaces and/or when Bouncers/Rockers have
been used as a sleep product.
• NEVER use on a bed, sofa, cushion, or other soft surface.
• Stay near and watch baby during use. This
product is not safe for sleep or unsupervised use.
If baby falls asleep, remove baby as soon as possible
and place baby on a rm, at sleep surface such as
a crib or bassinet.
TO PREVENT FALLS AND SUFFOCATION:
• ALWAYS use restraints. Adjust to t snugly.
• STOP using Bouncer/Rocker when baby starts trying to sit
up or has reached 20 lb (9 kg), whichever comes rst.
• Toy bar is NOT designed to be used as a carry handle.
• NEVER use on any elevated surface.
• NEVER leave baby unattended.
• NEVER Allow your Bouncer/Rocker to be used
as a toy.
• NEVER move Bouncer/Rocker with the child inside.
• NEVER substitute parts.
• Bouncer/Rocker is NOT intended for use as a carrier.
Check your Bouncer/Rocker for loose screws, worn
parts, torn material or stitching on a regular basis.
Replace or repair parts as needed.
Discontinue use of the Bouncer/Rocker should it
malfunction or become damaged.
IMPORTANT: Adult assembly required. Keep child away
during unpacking and assembly. Care should be
taken in unpacking and assembly. Examine product
frequently for damage, missing or loose parts. DO NOT
use if any parts are missing, damaged or broken.
Contact Baby Trend® for replacement part and
instructions if needed. Dial [phone].

ASSEMBLY
4
Copyright © 2022, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
3Copyright © 2022, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
PARTS
Check that you have all the parts for this model before assembling the Bouncer/Rocker.
Toy bar with removable toys
(Type may vary)
Headrest
(Type varies)
Vibraon Unit
*(2) Screws and (2) Nuts
Seat pad
Padded Support Tube
DO NOT remove the padding
Le / Right Base Frame Wire
(2) Backrest Tubes
IMPORTANT! To ensure safe operation of your
Bouncer/Rocker, please follow these instructions carefully.
Please keep these instructions for future reference.
IMPORTANT! Before assembly and each use, inspect
this product for damaged hardware, loose joints, missing
parts or sharp edges. NEVER use if any parts are missing or
broken.
IMPORTANT! Adult assembly is required. Keep child
away during unpacking and assembly.
(2) Base frame (tubes)
Base frame (Front) Base frame (Back)
*Screws and nuts aached in vibraon unit
and will require removal for assembly.

ASSEMBLY ASSEMBLY
65 Copyright © 2022, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Copyright © 2022, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
Top frame
NOTE: Start with the 2
backrest bars to create the
top arch (1).
Ensure that they click into
position (2).
Bouncer/Rocker frame assembly
1
1
2
"Click"
Frame Orientation Diagram
NOTE: refer to the diagram as
a guide for the following frame
connections.
With the toy bar connectors
facing up, insert the arch ends
into the padded support tube
holes (Fig. 1a).
Ensure that they click into
position and slightly pull to
ensure the frame is secure
(Fig. 1b).
Vibraon unit
Front
Release tab
outward
Base frame
connectors
downward
Toy bar holes
upward
Padded
support tube
orientaon Top arch
orientaon
Facing up
Fig. 1a
"Click"
Fig. 1b
DO NOT
remove the
padding

ASSEMBLY ASSEMBLY
87 Copyright © 2022, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Copyright © 2022, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
Attachment parts
Gather the parts and locate
the holes of the padded
support tube.
Register corresponding holes
of the vibration unit. To see
inserting orientation, refer
to the Frame Orientation
Diagram on page 5
Attach the vibration unit
2
Screw into the frame
Use the screws and nuts to install the vibration unit.
Tighten
Screws
Fig. 3a
Fig. 3b
Rear frame view
Flip the Bouncer/Rocker frame
upside down and slip the cover
over the vibration unit (Fig 3a).
NOTE: Keep buckle straps over
the tubes at all times.
Inserting the padding
3
Holes Facing
down
Boom
of fabric
covering
vibraon unit
entry
Pull the fabric over the
vibration one side at a time
until completely wrapped
(Fig 3b).
Top arch
orientaon
*Screws and nuts aached in vibraon unit
and will require removal for assembly
*
Correct
Orientaon

ASSEMBLY ASSEMBLY
109 Copyright © 2022, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Copyright © 2022, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
Complete the padding cover
by gently stretching the top
covering over the backrest
frame (Fig. 3c).
NOTE: Keep buckle straps
over the tubes at all times.
Buckle each corresponding
support straps (Fig. 3d).
Always maintain the straps
buckled during use.
Fig. 3d
Fig. 3c
Fig. 4b
Fig. 4a
Base frame attachment
4
Base Frame Orientation
Diagram
NOTE: refer to the diagram as
a guide for the following base
connections.
Base frame
tubes
Base frame
front
Staonary
feet
Base frame
back
Base assembly
NOTE: ensure that rubber on
tube matches same side as
flip-out stationary feet.
Facing down Insert each tube
end with the hole into the
Base frame (back) part with
the tab until they click
(Fig. 4a).
NOTE: ensure that rubber on
tube matches same side as flip-
out stationary feet.
Facing down Insert each
opposite tube ends with the
into the Base frame (front)
firmly until they lock (Fig. 4b).

ASSEMBLY ASSEMBLY
1211 Copyright © 2022, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Copyright © 2022, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
Base frame wire connection
Locate the and base frame,
right and left base frame
wires (Fig. 4c).
NOTE: Base frame wires must
be curved inward toward base
for proper installation (Fig. 4d).
Fig. 4c
Fig. 4d
Fig. 4e Fig. 4f
LR
Insert each base frame wire in firmly (Fig. 4e). Both
must click into position (Fig. 4f).
Flip-out the 2 stationary feet
NOTE: use the 2 feet to assist in
assembing the Bouncer/Rocker
frame sections (Fig. 5a).
Rotate the stationary feet out
on both front and back sides of
the base frame (Fig. 5b).
Align frames
Align the complete seat frame with
the base frame wire. Press in firmly
(Fig. 5c).
Connect the frames
5
Front Back
Fig. 5a
Fig. 5b
Fig. 5b
Fig. 5c

SAFETY
14
Copyright © 2022, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
ASSEMBLY
13 Copyright © 2022, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
Release
Fig. 5d
Fig. 5e
Fig. 5f
Fig. 6a
Secure the Bouncer/Rocker Frame
Push the wire into the connection
firmly (Fig. 5d).
The connectors and base frame
wires are secure only when they
click into position (Fig. 5e).
Harness release
If buckled, unbuckle the straps on each side of the seat restraint
(Fig. 6a).
SEAT RESTRAINT
6
Completed Bouncer/Rocker Frame
The completed frame assembly
should look exactly as illustrated
in (Fig. 5f).

ASSEMBLY
16
Copyright © 2022, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
SAFETY
15 Copyright © 2022, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
Head Pillow
To attach the pillow, thread the hook and loop fastener through the
loop at the top front of the fabric.
NOTE: product may be used with or without the head pillow.
Accessory
7
Child placement
Carefully place the child in
the Bouncer/Rocker seat
and buckle the waist straps
into the crotch buckles
(Fig. 6b).
Buckle may be tucked under
the fabric (Fig. 6c).
Adjustment buckle
Always adjust the straps
so that the restraint fits
the child snugly (Fig. 6d).
Fig. 6b
Fig. 6c
Fig. 6d
Tighten