Babybee pod User manual

pod co-sleeper manual
babybeeonline.com
IMPORTANT! READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
Safety Standards: BS EN 1130:2019, ASTM F2906-13,
AS/NZS 8811.1:2013, ASTM F2194-16e1

2
Thanks for choosing
Babybee!

3
Read me first
Before we start, there’s a few important things you
need to be aware of:
Return Policy
If you decide that the Pod Co-Sleeper
is not the perfect one for you, we oer
a Free Return Policy when returned
in original condition and packaging
(with no signs of usage), including
the mattress which is to remain in its
sealed sleeve. Please be mindful of
this when unboxing and setting up.
Refer to our website for full terms and
conditions.
Enjoy the ride, from all of us at
Safety first
The safety of your family is our number one priority. Please take
the time to carefully read this manual and all warning notices
on page - before getting started. Incorrect assembly or
use can result in serious injury or even death.
To prevent injury from choking, carefully remove and
immediately move out of reach all plastic packaging.
This product is intended for use for babies aged between 0
and 5 months, weighing up to a maximum of 9kg or until they
can push up on hands and knees. Move your child to another
sleeping product when your child reaches this stage.
Support
If at any stage you require assistance
with set up or use, please refer to the
Pod product page on our website.
There, you'll find instructional videos
and FAQ’s. Or feel free to email us
anytime at:
[e-mail]
or [e-mail]

4
.
.
.
.
.
.
.
.
.
.
.
 .
What’s in the box?
Setting up your co-sleeper
Adjusting the height
Co-sleeper & bed height set up
Co-sleeper function: fix to bed
Using in standalone mode
Moving the co-sleeper
Disassembly
Free accessories
Tips for maintaining your co-sleeper
Warranty information
Safety warnings
Contents

5
Please check that you have all the correct parts before
getting started.
What’s in the box?
1 x Co-sleeper
2 x Legs
1 x Carry Bag
1.
2.
3.
1 x Basket
2 x Fixing Belts
1 x Fitted Sheet
4.
5.
6.
1 x Mosquito Net
1 x Mattress & Cover
7.
8.
14 2
5 8
3
6 7

6
Setting up your co-sleeper
Open bag and take out
contents. Remove all cable ties
and packaging.
1
Insert one set of legs into the co-
sleeper body at a time, ensuring
the button clicks audibly into the
leg joint. Ensure both legs are
clicked in securely.
2
Adjust height to the lowest
position by aligning the spring
button with the required hole
on the inside of the leg - insert
and push down. Repeat on the
other side.
3
click!

7
Insert all basket tubes (attached
to basket) into frame, until spring
buttons audibly click into place.
4
click!
Adjusting the height
Squeeze the height adjustment
buttons at each end of the
co-sleeper body and raise the
co-sleeper to one of the seven
height settings.
1
1
2
3
4
5
6
7
This product is intended for use for babies aged between 0 and 5
months, weighing up to a maximum of 9kg.
The 2 legs of the co-sleeper should ALWAYS be adjusted to the
same height to ensure a flat even surface.

Co-sleeper & bed height
set up
Measure bed height.
Pull height adjustment handles
at each end up to adjust co-
sleeper to preferred height
Ensure the co-sleeper side
wall closest to the bed is not
higher than the mattress.
Check co-sleeper is level,
both numbers on the height
adjustment handles are the
same & the crib is not on a lean.
1
2
3
4
Recommended mattress heights
Compatible with Single, King Single, Double, Queen and King Size Beds -
Not compatible with Super King Bed.
This co-sleeper is designed for use only with the adult beds that are
between 50.8cm and 63.5cm from floor to top of adult mattress.
If your mattress is below 50.8cm do not use product as a co-sleeper. Adult
mattress must be at least 2.5cm higher than the co-sleeper’s side opening.
8
To avoid death from the infant’s neck being caught on the top rail, on
the side that is next to the adult bed, the top rail must be no higher than
the adult bed mattress.

Co-sleeper function: fix to bed
To lower the drop side: Fully open
zips on both sides. Holding the
side rail, slide the buttons on
the underside of the rail and lift
rail upwards. The drop side can
be attached by Velcro® to the
underside of the co-sleeper.
1
1
1
Attach the part of the fixing belt
with two clips to the underside of
the co-sleeper, with the female
part pointing towards the floor.
Repeat with the 2nd fixing belt.
Place co-sleeper alongside
the parent’s bed and with the
drop side lowered, adjust the
co-sleeper height until the top
edge of the co-sleeper’s lowest
side is level with or below the
parent’s mattress.
2
3
To avoid injury or death, the top edge of the
co-sleeper’s lowest side next to the adult mattress
MUST BE NO HIGHER than the adult mattress.
F
When the co-sleeper is attached to the adult bed,
ensure the fixing belts remain straight and fixed in
a horizontal position.

Wrap the fixing belt around the
whole frame of the adult’s bed.
4
Click fixing belt into co-sleeper.
Tighten the fixing belt ensuring
there is no gap between the
adult bed and the co-sleeper.
Check the tightness of the
attachment system before
each use by pulling the bedside
sleeper in a direction away from
the adult bed.
5
click!
There shall never be a gap between the co-
sleeper and the adult bed. If there is any gap between the bedside
sleeper and the adult bed DO NOT use product. DO NOT fill the gap
with pillows, blankets or other items that are a suocation hazard
Both clips on the attachment strap MUST be
attached to the crib when in co-sleeper mode. If one clip is broken
or will not attach to the crib, DO NOT use the crib in co-sleeper mode
until you have replaced the fixing belt.
Never use this product in bedside sleeper
mode without the anchor plates securely attached to the adult bed.
Stop using the crib as soon as the child is able
to sit unaided, pull itself up or push up on its hands and knees.
To prevent death from entrapment,
the co-sleeper must be properly secured
to the adult bed using the fixing belt.