BaByliss PRO BAB787U User manual

BAB787U
CORDLESS SUPER MOTOR
SKELETON TRIMMER

CORDLESS SUPER MOTOR SKELETON TRIMMER
Heavy duty professional skeleton trimmer with extra wide Japanese
steel t-blade with zero-gap function and high-torque brushless motor
for precision detailing and outlining with outstanding performance.
FEATURES
• High power cord or cordless control
• Precision engineered Japanese steel blades
• Extra wide t-blade with zero gap function
• Lithium technology for sustained power performance
• 120 mins usage from a 3 hour charge
• High-torque brushless motor for long-lasting power and speed
• Absolutely balanced for superior handling
• Robust all metal housing design
• Charging and storage stand
• Includes oil and cleaning brush

SAFETY CAUTIONS
• Original instructions. Read these safety precautions
carefully before using the unit! This appliance should
only be used as described within this instruction
booklet. Please retain for future reference.
IMPORTANT CHILD SAFETY
• ALWAYS keep out of the reach of very young children
(during and after use).
• This appliance should not be used, cleaned or
maintained by children.
• Always take extra care if used on children or near
children.
• Do not use on very young children.
IMPORTANT SAFETY
• UK Only: Do not use this appliance in the
bathroom.
• Outside the UK: If using the appliance in a bathroom,
unplug after use as the proximity of water can be
dangerous even if the appliance is switched off. For
additional protection the installation of a residual current
device (RCD) with a rated residual operating current not
exceeding 30mA is advisable in the electrical circuit
supplying the bathroom. Ask your installer for advice.
• WARNING! Do not use this appliance near bathtubs,
showers, basins or other vessels containing water.
• Do not immerse the appliance in water or other liquids.

Keep the appliance dry.
• The appliance’s charging stand and/or adaptor must
be kept away from sources of water so that they do not
fall into the water.
• CAUTION: Keep the power cord and the appliance
dry. For appliances with a removable power supply
unit, remove the power cord before cleaning or using
the appliance under running water.
• Always inspect the appliance before use for noticeable
signs of damage. Do not use if damaged or if the
appliance has been dropped. In the event of damage
contact the Conair Customer Care Line (refer to ‘UK
After Sales Service’ section for further information).
• Do not use the appliance if the charging adaptor or lead
is damaged. In the event of damage, discontinue use
immediately. If the charging adaptor or lead is damaged,
it must be replaced by the manufacturer. Return the
appliance to the Customer Care Centre (refer to ‘UK
After Sales Service’ section for further information). No
repair must be attempted by the consumer.
• Only use the attachments supplied with this appliance.
• WARNING! For the purposes of recharging the battery,
only use the detachable charging supply unit provided
with this appliance - CA80M. This symbol
indicates there is a detachable power supply for means
of charging.
• Do not leave the appliance unattended when switched
on.

• Do not leave the appliance plugged in for more than
24 hours.
• Unplug immediately if any problems occur during use.
• Do not place the appliance on any surface whilst in
operation.
• Special care is required when using the appliance close
to the ears, eyes and face.
• This appliance may be used by children aged from 8
and older and people with reduced physical, sensory or
mental capabilities or lack of experience and knowledge
if they have been given supervision or instruction on the
safe use of the appliance and understand the hazards
involved. Children must not play with the appliance.
• This product contains a lithium ion rechargeable
battery that is not to be removed from the appliance
for charging. The batteries in this appliance are non-
replaceable. Batteries must be disposed of safely at
the end of life. Please take to a recycling centre for
safe disposal. If the battery leaks, avoid touching it and
dispose of it at a recycling centre.

WEEE - END-OF-LIFE ELECTRICAL AND ELECTRONIC
EQUIPMENTS
In everybody’s interest and to actively participate in protecting the
environment and human health:
• Do not discard your products with your unsorted household wastes.
• The WEEE (Waste electrical and electronic equipment) must be
collected separately.
• Use the return and collection systems dedicated to the WEEE
available in your area. In this way, some materials can be recycled,
re-used or recovered.
• By ensuring this product is disposed of properly, you will help prevent
potential negative consequences for the environment and human
health due to possible content of hazardous substances.
For more detailed information about the disposal of this product,
please contact your local household waste disposal service.
INSTRUCTIONS FOR USE
• Charging the appliance - Before using the appliance for the rst
time, charge the battery continuously for 3 hours. Maximum battery
capacity will only be reached after 3 completed charging and
discharging cycles.
• Plug the charging adapter into a suitable mains power socket
and switch on. The red LED indicator light will ash when
correctly connected to the mains power and will continuously
ash until the battery has fully charged. When the battery is fully
charged the LED indicator light will stop ashing but remain on.
NOTE: Always place the trimmer in the base with the ‘I/0’ switch in
the OFF position.
• When the trimmer is running low on charge, the LED indicator light
will ash, warning there is approximately 3 minutes of battery use
remaining. A 3 hour charge will provide approximately 120 minutes
use. A 30 minute quick charge will provide approximately 30 minutes
use.
• If the charging light starts to ash rapidly (more than 4 ashes per
second) then the appliance is faulty. If this happens then please stop
charging and remove the adapter from the mains and contact the

Conair Customer Care Line. (See ‘UK After Sales Service’ section for
further information).
• Preserving the batteries - In order to maintain the optimum capacity
of the rechargeable batteries, the appliance should be recharged for
3 hours approximately every 3 months.
• Using the trimmer on the mains - ensure that the trimmer is switched
off. Plug into a suitable mains socket. Wait for approximately a
minute, and then switch on.
IMPORTANT: Do not use the trimmer in this mode for more than 20
minutes.

Zero Gap Replacement Tool
IMPORTANT! Only ever attempt to zero gap the blades using the
adjustment tool provided, following the instructions very precisely.
The adjustment tool is required to adjust the blades to zero gap, to
achieve a closer, more precise cut.
Zero Gap Tool with Screwdriver
Step 1.
Before placing the adjustment tool on to the blade, use the screwdriver
provided to loosen the tension screws, without removing them
completely from the blade holder.

Step 2.
Place the zero gap tool on to the bottom of the blade.
Step 3.
Push the zero gap tool up, so the moving blade sits closely with the
top of the xed blade.
IMPORTANT! Be sure the blades are aligned properly. The teeth of
the smaller blade (cutter) should rest slightly below the upper edge of
the larger blade.

Step 4.
Using the screwdriver, tighten the tension screws to hold the blade in
place.
Step 5.
Remove the zero gap tool from the blade by pushing it gently down.
CLEANING AND MAINTENANCE
To maintain correct performance, the blades must be regularly cleaned
and oiled.
• Brush away the hair from the blades using the cleaning brush
provided.
• It is recommended to oil the blades every time that the trimmer is
used, using the oil provided. Never use any other product: this oil
was formulated for high speed trimmers, it does not evaporate or
slow down the blades.
TECHNICAL DATA
Vibration and noise levels
Adaptor CA80M
Vibrations < 2,5 m/s²
LpA (dB(A)) < 70

UK GUARANTEE
This BaByliss PRO appliance is guaranteed for professional use for 2
years and is only valid within the United Kingdom.
Exclusions
This guarantee will no longer be valid meaning that The Conair Group
Ltd will not be liable to repair or replace your product where:
1.) The appliance has been used on a voltage supply other than that
which is marked on the product, or advised within this instruction
booklet.
2.) The appliance has been purchased from an unauthorised stockist*.
3.) Repairs or alterations have been attempted by unauthorised
persons.
4.) The failure of the appliance is a direct result of misuse.
5.) The failure is a result of not following the instructions for use.
This guarantee does not cover any cosmetic damage due to misuse
of the product nor any damage to persons or property that occurs
because of product misuse.
*unauthorised stockists include, but are not limited to online auction
sites, private sellers and those selling second hand goods, refurbished
products etc.
Please contact the Conair Customer Care Line on 03705 133 191
(09:00 to 17:00 Monday to Friday) or e-mail [e-mail] for
further information on authorised stockists.
It is important to retain your proof of purchase. We recommend
attaching your receipt to this page.
Even where a refund may be applicable, no refund will be provided
without a valid receipt or proof of purchase, we will only be able
to offer a repair or replacement service. Please note this does

not apply if the product was purchased directly from The Conair
Group Ltd.
Guarantees on replacement products run from the original purchase
date or date of delivery, whichever is later, and not from the date of
replacement.
This guarantee is an additional benefit and does not affect your
statutory rights as a consumer.
If you have any queries regarding this guarantee please contact the
Conair Customer Care Line on 03705 133 191 (09:00 to 17:00 Monday
to Friday) or e-mail [e-mail].

UK AFTER SALES SERVICE
For further advice on using the appliance or should you need to return
your product, please contact the Conair Customer Care Line on
03705 133 191 (09:00 to 17:00 Monday to Friday) or e-mail your enquiry to
[e-mail].
Return address:
Customer Care Centre
Conair Logistics
Unit 4, Revolution Park
Buckshaw Avenue
Buckshaw Village
Chorley
PR7 7DW
Please enclose your returns number, name and address details, together
with a copy of proof of purchase and details of the fault.
Please note this Instruction Booklet is not the guarantee.
SAFE DISPOSAL
The symbol on the product or on its packaging indicates
that this product may not be treated as household waste. Instead it
should be handed to an appropriate collection point for the recycling
of Electrical and Electronic Equipment (WEEE) and the waste of
batteries. By ensuring this product is disposed of correctly, you will
help prevent potential negative consequences for the environment
and human health, which could otherwise be caused by inappropriate
waste handling of this product. For more detailed information about
the recycling of this product, please contact your local council ofce or
your household waste disposal service.

630557.03
UKCA DECLARATION OF CONFORMITY
In accordance with UK Government guidance
We, the undersigned, take full responsibility for the product’s compliance.
Type of product
: Trimmer
Type number
: T169b
Trademark
: BaByliss PRO / Conair / CPL
With following characteristics
: 100-240V~, 50-60Hz, 4.5VDC, 1.0A, 4.5W
Country of origin
: China
Manufacturer name
: Conair UK
Address
: PR7 7DW
The object of the declaration described above is in conformity with the relevant UK Statutory
Instruments (and their amendments):
2016 No. 1101
Electrical Equipment (Safety) Regulations 2016
2016 No. 1091
Electromagnetic Compatibility Regulations 2016
2012 No. 3032
Restriction of the use of certain Hazardous Substances in Electrical and
Electronic Equipment Regulations 2012
2019 No. 539
Ecodesign for energy-related products and energy information (Amendment) (EU
Exit) Regulations 2019
2008 No. 1597
Supply of Machinery (Safety) Regulations 2008
References to the relevant designated standards used or references to the other technical
specifications in relation to which conformity is declared:
LVD BS EN 60335-1 2012 A2: 2019
BS EN 60335-2-8 2015 A1: 2016
(including EMF) BS EN 62233 2008
Ecodesign BS EN 50563 2011 A1: 2013
EMC BS EN 55014-1 2017
BS EN 55014-2 2015
BS EN 61000-3-2 2014
BS EN 61000-3-3 2013 A1: 2019
The technical documentation is available from:
Name: The Conair Group Ltd,
Address: Unit 4, Revolution Park, Buckshaw Avenue, Buckshaw Village, Chorley, PR7 7DW
Signed by and on behalf of:
BABYLISS FACO S.R.L. (authorised by BABYLISS S.A.R.L. and The Conair Group Ltd)
Avenue de l’Indépendance 25, B-4020 Wandre, Belgium

630557.03
EU DECLARATION OF CONFORMITY
DECLARATION UE DE CONFORMITÉ
This declaration of conformity is issued under the sole responsibility of the manufacturer
La présente déclaration de conformité est établie sous la seule responsabilité du fabricant soussigné
Type of product / Type de produit
: Trimmer / Tondeuse
Type number / Numéro de type
: T169b
Trademark / Marque
: BaByliss PRO / Conair / CPL
With following characteristics
Avec les caractéristiques suivantes
: 100-240V~, 50-60Hz, 4.5VDC, 1.0A, 4.5W
Country of origin / Pays d’origine
: China
The object of the declaration described above is in conformity with the relevant Union harmonisation
legislation:
L’objet de la déclaration décrit ci-dessus est conforme à la législation d’harmonisation de l’Union applicable:
2014/35/UE
Low Voltage Directive / Directive basse tension
2014/30/UE
ElectroMagnetic Compatibility Directive / Directive concernant la compatibilité
électromagnétique
2011/65/UE
RoHS Directive and its amendments including (EU) 2015/863 / Directive RoHS et
ses amendements dont (UE) 2015/863
2009/125/CE
Ecodesign Directives implemented by the Commission Regulations (EC) No.
1275/2008 amended by (EU) No. 801/2013 and (EC) No. 2019/1782 (where
applicable) / Directive relative à l’écoconception mise en œuvre par les règlements de la
Commission (CE) No. 1275/2008 modifiée par (UE) No. 801/2013 et (CE) No. 2019/1782
(le cas échéant)
2006/42/EC
Machinery Directive / Directive Machine
In accordance with the following standards: En accord avec les normes suivantes:
LVD EN 60335-1 2012 A11: 2014; AC: 2014; A13: 2017; A1: 2019;
A2: 2019; A14: 2019
EN 60335-2-8 2015 A1: 2016
(inluding EMF /
y compris EMF) EN 62233 2008
Ecodesign EN 50563 2011 A1: 2013
EMC EN 55014-1 2017
EN 55014-2 2015
EN 61000-3-2 2014
EN 61000-3-3 2013 A1: 2019
CE mark first affixed / Date de 1ère apposition du marquage CE: 01/2020
Signed by and on behalf of / Signé par et au nom de:
BABYLISS FACO S.R.L. (authorised by / autorisé par BABYLISS S.A.R.L. and / et The Conair Group Ltd)
Avenue de l’Indépendance 25
B-4020 Wandre, Belgium

IB-19/672B