BaByliss PRO SPEED 2200 User manual

Model 5541CU
PRO SPEED 2200

PRO SPEED 2200
This 2200W salon AC long-life hairdryer has a powerful airow for
fast drying. It has heat-balancing ceramic and ionic technology for
condition and shine.
FEATURES
• 2200W
• Long life AC motor gives high power airow for fast drying
• 3 heat / 2 speed settings plus true cold shot button
• Ionic technology for a frizz-free nish
• Heat balancing ceramic technology
• Slim concentrator nozzle for a smooth nish
• Removable lter for easy cleaning
• 3m salon length cord
• 5 year guarantee
SAFETY CAUTIONS
• This appliance should only be used as described
within this instruction booklet. Please retain for future
reference.
WARNING! Polythene bags over product or packaging
may be dangerous. To avoid danger of suffocation, keep
wrapper away from babies and children. This bag is not
a toy.
• UK Only: This appliance must not be used in the
bathroom. If using the appliance in a bathroom, unplug
after use as the proximity of water can be dangerous
even if the appliance is switched off. For additional

protection the installation of a residual current device
(RCD) with a rated residual operating current not
exceeding 30mA is advisable in the electrical circuit
supplying the bathroom. Ask your installer for advice.
WARNING! Do not use this appliance near water
contained in basins, bathtubs or other vessels.
• Do not immerse the appliance into water or other
liquids.
• Do not use the appliance in the bathroom.
• Never look directly into the barrel of the hairdryer when
it is switched on.
• Always inspect the appliance before use for noticeable
signs of damage. Do not use if damaged or if the
appliance has been dropped. In the event of damage,
contact the Conair Customer Care Line (refer to ‘UK
After Sales Service’ section for further information).
• Do not use the appliance if the lead is damaged. In
the event of damage, contact the Conair Customer
Care Line (refer to ‘UK After Sales Service’ section for
further information).
• Do not leave the appliance unattended when switched
on or plugged in.
• This unit is equipped with a safety thermostat. In the
event of overheating the appliance will either stop
automatically or run hot and cold intermittently. Should
this happen, switch the dryer to the ‘‘0’’ position,
unplug and allow to cool for 10 minutes. Before use,
ensure the rear lter is clear of hair and other debris.
Plug in and switch on. If the appliance continues to

overheat discontinue use immediately, switch off and
unplug, and contact the Conair Customer Care Line
(refer to ‘UK After Sales Service’ section for further
information).
• Take care that the air vents do not become blocked
when in use. Ensure the rear lter is clear of hair and
other debris before use.
• Always keep the rear of the appliance away from the
hair during use to prevent it being drawn in through the
rear air lter.
• Do not place the appliance on any heat sensitive
surface whilst in operation.
• Take care to avoid the hot surface of the appliance
coming into direct contact with the skin, in particular
the ears, eyes, face and neck.
• This appliance should not be used by adults whose
reduced physical, sensory or mental capabilities, or
whose lack of experience and knowledge, might cause
a hazard, unless they have been correctly instructed to
understand the safe use and hazards involved and are
adequately supervised.
• Careful adult supervision is required when this appliance
is used on or near children. Do not use on very young
children.
• This appliance should not be used, cleaned or
maintained by children. Keep out of reach of children.
• Always ensure that this appliance is kept out of the
reach of children at all times, particularly during use

and whilst cooling.
• Allow appliance to cool before storing away.
• After use do not coil the lead around the appliance as
this may cause damage to the lead. Instead coil the
lead loosely by the side of the appliance.
• This appliance complies with the requirements of
Directives 2004/108/EC (Electromagnetic Compatibility)
and 2006/95/EC (Electrical Safety of Domestic
Appliances).
Ionic Technology
Many aspects of modern living, including air conditioning, contact with
man-made bres and air pollution contribute to a build-up of static
electricity in the hair. Even brushing and towel drying the hair can
increase these levels, causing the surface of the cuticle to become
rough. Consequently, hair may have a dull appearance. High levels of
static charge cause hair to become “y-away” and difcult to style.
The ion generator produces a stream of negative ions which act to
neutralise the static charge, smoothing the scales on the cuticle for
shiny, smooth and manageable hair so you can achieve your desired
style easily.
INSTRUCTIONS FOR USE
General
• Towel dry and detangle hair.
• Plug the appliance into a suitable mains socket.
• Select the required heat and speed settings.
• After use, switch off and unplug the appliance.
• Allow to cool before storing away.
IMPORTANT! Always keep the rear of the appliance away from the hair
during use to prevent it being drawn in through the rear air lter.

Heat and Speed Settings
There are 3 heat and 2 speed settings plus the true cold shot button.
Use the higher heat and higher speed settings for initial drying and use
the lower heat and lower speed settings for styling as the hair begins
to dry and scrunch drying.
True Cold Shot Button
Use the true cold shot button on warm hair to rapidly cool the hair and
set the style in place for a long lasting effect.
Slim Concentrator Nozzle
Use the slim concentrator nozzle to direct the airow just where you
want it, to make styling easier.
STYLING TIPS
Body & Volume
To help create extra body and volume in the hair, lean forward so the
head is upside down when drying. Direct the airow towards the roots
for maximum lift. When the hair is dry, brush back in to required style.
Straightening
To create a smooth straight look, rst divide the hair into sections.
Attach the slim concentrator nozzle to the hairdryer, using a brush,
hold the hair taut and direct the airow down the hair section. Roll the
ends under slightly as you dry the hair to nish the style.
Making Waves
To create tousled natural-looking waves, position head upside down.
Using the dryer without the nozzle, grasp the hair at the roots and
scrunch between ngertips whilst drying. When the hair is dry, move
back into required position for a casual, natural look.

CLEANING & MAINTENANCE
To keep your dryer in the best possible condition, please follow the
steps below:
General
• Do not wrap the lead around the dryer, instead coil the lead loosely
by the side of the dryer.
• Do not use the dryer at a stretch from the power point.
• Always unplug after use.
Cleaning the filter
• Ensure the appliance is switched off, unplugged and cool.
• Holding the handle of the appliance rmly, twist the rear lter to the
left to remove.
• Using a soft brush, clean any hair and other debris from the lter.
• Replace the rear lter by aligning the grooves and turning to the right
until the lter clicks back in to place.
• To clean the outside of the dryer, wipe with a damp cloth. Make sure
no water enters the dryer and it is completely dry before use.
UK GUARANTEE
This BaByliss appliance is guaranteed for consumer use for 5 years.
This guarantee covers defects under normal use from date of
purchase and ceases to be valid in the event of alteration or repairs by
unauthorised persons. If the appliance does not perform satisfactorily
due to defects in materials or manufacture, it will be repaired or replaced
through Conair UK After Sales Service. The Conair Group Ltd reserves
the right to amend terms and specications without prior notice.
This guarantee in no way affects your statutory rights.

UK AFTER SALES SERVICE
For further advice on using the appliance, contact the Conair Customer
Care Line on 0870 5 133191 (09:00 to 17:00 Monday to Friday) or email
your enquiry to [e-mail].
If you should need to return your appliance to us please send it to the
following address:
Customer Care Centre
Conair Logistics
Unit 4
Revolution Park
Buckshaw Avenue
Buckshaw Village
Chorley
PR7 7DW
Please enclose your name and address, together with a copy of proof
of purchase and details of the fault.
SAFE DISPOSAL
The symbol on the product or on its packaging indicates that this
product may not be treated as household waste. Instead it should be
handed to an appropriate collection point for the recycling of Electrical
and Electronic equipment. By ensuring this product is disposed of
correctly, you will help prevent potential negative consequences for
the environment and human health, which could otherwise be caused
by inappropriate waste handling of this product. For more detailed
information about the recycling of this product, please contact your
local council ofce or your household waste disposal service.

UK WIRING INSTRUCTIONS
The wires in the mains lead are coloured in accordance with the
following code:
BLUE = NEUTRAL
BROWN = LIVE
• The wire which is coloured BLUE must be connected to the terminal
which is marked with the letter N.
• The wire which is coloured BROWN must be connected to the terminal
which is marked with the letter L.
• Neither core should be connected to the earth terminal of a three pin
plug marked with the letter E or .
This appliance comes tted with a British Standard 13 amp type plug
and a 13 amp fuse. It is important to always use a 13 amp fuse, should
its replacement be required. If any other type of plug is used, a 10 amp
fuse must be tted at the distribution board.