Badger Basket LEISURE TWIN DOLL WAGON User manual

LEISURE TWIN DOLL WAGON
- GRAY/PINK
Assembly Instructions. Adult Assembly Required.
Read all instructions before use.
This manual is part of the product and
must be kept for future reference.
VERSION CODE*:
1.0/0519/TG
* Model and Version numbers are needed
if replacement parts are requested
MODEL NUMBER*:
67051
Badger Basket®, PO Box 227, Edgar, WI 54426-0227 USA • Web: www.badgerbasket.com
U.S. Based Customer Service Toll-Free (Mon-Thurs 7:00 AM-4:00 PM CST): 1-800-236-1310
Phone: [phone] • Fax: [phone]
FOR REPLACEMENT PARTS:
http://www.badgerbasket.com/parts
•

CARE INSTRUCTIONS:
Frame and attached fabrics can be spot and wiped clean with a damp cloth and mild soap and dry thoroughly.
Removable fabric can be hand washed in cold water and mild detergent and allow to air dry.
BEFORE YOU BEGIN ASSEMBLY:
Check all parts. If anything is missing or not
satisfactory, please DO NOT call the store
or return the product to them. Please go online to:
http://www.badgerbasket.com/parts
Most problems are resolved
without you needing to leave home.
When emailing or calling us, please have this
instruction manual, your product model number,
and your Version Code ready.
Your Model Number is: 67051
Your Version Code is: 1.0/0519/TG
JASSEMBLY TIP! Review the entire manual before beginning.
WARNING - CAUTION
READ ALL INSTRUCTIONS before use of this product. Use only the parts
provided by Badger Basket®. Keep instructions for future use. Do not use the
product if it is damaged or broken. Periodically inspect the product to ensure
all parts remain tight. This item is a toy for dolls only. It is never to be used
for real infants or pets. No product is a substitute for adult supervision.
Always supervise your child during play. For children ages three (3) years
and older. Never sit on or stand on the toy. Never use the doll wagon unless
the frame locks are properly secured.

A B×4
D×2
D
B
B
C
1
B
D
B
A
WAGON FRAME WHEEL
PAD AXLE
，
Insert the front and rear axles through the holes on the wagon leg posts.
Snap the wheels onto the axles by squeezing the metal clips on the outside of the
wheels,pushing the wheels onto the axles, and then releasing the clips so they
lock over the ends of the axles, Gently tug on each wheel to make sure
it s locked in place.
，

C
3
2
OR
snap bar into the clip to prop up the wagon
unsnap and unzip to use the wagon without the seats in place