Badger Basket 99650 Quick setup guide

2.0/0813/HF
REVERSIBLE DOUBLE
DOLL PRAM - PINK POLKA DOT
MODEL NUMBER*:
99650
Dolls & accessories
not included.
If you need product
parts, see Page 2!
Assembly and Use Instructions. Adult assembly Required.
Read all instructions before use.
This manual is part of the product and
must be saved for future reference.
VERSION CODE*:
2.0/0813/HF
* Model and Version numbers are needed
if replacement parts are requested
FOR REPLACEMENT PARTS:
Go to our web site: http://www.badgerbasket.com/parts
Or scan QR code at right with your smartphone

2.0/0813/HF
WARNING - CAUTION
WARNING
ADULT ASSEMBLY REQUIRED
DUE TO THE PRESENCE OF SMALL PARTS AND SHARP
POINTS DURING ASSEMBLY, KEEP OUT OF REACH OF
CHILDREN UNTIL ASSEMBLY IS COMPLETE.
BEFORE YOU BEGIN ASSEMBLY:
Check all parts. If anything is missing or not
satisfactory, please DO NOT call the store
or return the product to them. Please go online to:
http://www.badgerbasket.com/parts
Most problems are resolved
without you needing to leave home.
When contacting us, please have this
instruction manual, your product model number,
and your Version Code ready.
Your Model Number is: 99650
Your Version Code is: 2.0/0813/HF
READ ALL INSTRUCTIONS before use of this product. Use only the parts and
hardware provided by Badger Basket. Keep instructions for future use. Do not use the
product if it is damaged or broken. Periodically inspect the product to ensure all parts
remain tight. This item is a toy for dolls only. It is never to be used for real infants or
pets. No product is a substitute for adult supervision. Always supervise your child
during play. For children ages three (3) years and older. Stroller should be folded and
unfolded by an adult only. Never use the doll stroller unless the frame locks are properly
secured. Folded stroller should be stored out of reach of children.
Never sit on or stand on the toy.
Badger Basket Company, PO Box 227, Edgar, WI 54426-0227 USA • Web: www.badgerbasket.com
Toll-Free (Mon-Thurs 7:00 AM-4:00 PM CST): 1-800-236-1310
Phone: [phone] • Fax: [phone]

2.0/0813/HF
3. Insert one (F) Short Front Axle through one (G) Small Wheel. Snap on one (E) Hub
Cap.
4. Insert this wheel assembly through one of the front frame posts on the (A) Stroller
Frame. Slide a second (G) Small Wheel onto the (F) Short Front Axle, and secure with
one (D) Axle Retainer Clip and one (E) Hub Cap.
~ Repeat Steps 3 & 4 to assemble/attach the 3rd and 4th front wheels
to the stroller frame. ~
PARTS & QUANTITY INCLUDED:
A x 1 - STROLLER FRAME E x 6 - HUB CAP
B x 1 - LONG REAR AXLE F x 2 - SHORT FRONT AXLE
C x 2 - LARGE WHEEL G x 4 - SMALL WHEEL
D x 4 - AXLE RETAINER CLIP H x 2 - SEAT
1. Unfold the (A) Stroller Frame.
2. Insert the (B) Long Rear Axle through the rear posts on the (A) Stroller Frame. Put
one (C) Large Wheel onto each end of the Axle. Snap one (D) Axle Retainer Clip onto
each end of the axle, and snap one (E) Hub Cap onto each wheel.
(4)(3)
(1)
STEPS FOR ASSEMBLY:
(2)

2.0/0813/HF
(5) (6)
5. Adjust the backseat on the stroller frame by pressing the two buttons on the sides of
the seat bottom frame.
6. Slide the two (H) Seats onto the seat tracks as shown. You can insert them facing
forward or back, and they can be removed and reversed BY AN ADULT at any time if
you want the dolls to face the opposite way.
7. Adjust handle height/position by pressing the handle buttons and moving the handle
up and down.
8. The stroller is assembled!
To fold the stroller (only to be done by an adult), lift
up the metal safety frame locks as you also pull up
on the plastic frame buckles to release the hinge
and collapse the stroller into the folded position.
Seat Canopies can be opened or folded at. Seat
recline can be adjusted on both seats by holding
the seat back and pulling forward or pushing back
(do not force beyond the limits of the ratcheting
mechanism).
(7) (8)
Metal Lock
Plastic
Buckle
CARE INSTRUCTIONS:
Hand wash removable fabric pieces (seats,
basket) in cold water with mild detergent and
air dry. Canopies can be spot cleaned with cold
water and mild detergent and air dry.
Wipe the metal/plastic frame clean as needed
with a damp cloth and dry thoroughly.