Badger Basket 10193 Quick setup guide

6.0/0714/TG
DOLL HIGH CHAIR
WITH PLATE, BIB, & SPOON
* Model 10193 is shown here.
Badger Basket, PO Box 227, Edgar, WI 54426-0227 USA • Web: www.badgerbasket.com
U.S. Based Customer Service Toll-Free (Mon-Thurs 7:00 AM-4:00 PM CST): 1-800-236-1310
Phone: [phone] • Fax: [phone]
FOR REPLACEMENT PARTS:
http://www.badgerbasket.com/parts
Assembly and Use Instructions. Adult Assembly Required.
Read all instructions before use. This manual is part of the product
and must be saved for future reference.
VERSION CODE*:
6.0/0714/TG
* Model and Version numbers are needed
if replacement parts are requested
MODEL NUMBERS*:
01013 - Gingham
10193 - Chevron

6.0/0714/TG
BEFORE YOU BEGIN ASSEMBLY:
Check all parts and hardware. If anything is missing
or not satisfactory, please DO NOT call the store
or return the product to them. Please go online to:
http://www.badgerbasket.com/parts
Most problems are resolved
without you needing to leave home.
When contacting us, please have this
instruction manual, your product model number,
and your Version Code ready.
Your Model Number is: SEE COVER PAGE
Your Version Code is: 6.0/0714/TG
WARNING
ADULT ASSEMBLY REQUIRED. DUE TO THE PRESENCE
OF SMALL PARTS AND SHARP POINTS DURING
ASSEMBLY, KEEP OUT OF REACH OF CHILDREN UNTIL
ASSEMBLY IS COMPLETE.
WARNING - CAUTION
READ ALL INSTRUCTIONS before use of this
product. Use only the parts provided by Badger
Basket. Keep instructions for future use.
Do not use the product if it is damaged or broken. Periodically inspect the product to
ensure all parts remain tight. This item is a toy for dolls only. It is never to be used
for real infants or pets. No product is a substitute for adult supervision. Always
supervise your child during play. For children ages three (3) years and older.
Never sit on or stand on the toy.
CARE INSTRUCTIONS:
Frame and accessories can be wiped clean with a damp cloth and mild soap and dry thoroughly.
Spot clean fabric as needed with cold water and mild detergent and allow to air dry.

mm 60mm
40
J
J
J
J
J
B
C
D
E
A
J - Short Screw
K - Long Screw and
Plastic Spacer Set

H
I
J
F
J
J
J
J
K
K
G
3
In STEP 3, insert the PLASTIC SPACERS (K) into the TRAY
ARMS (G) first, and then attach the TRAY (G) to the
SIDES (B and F) using the LONG SCREWS (K).