
Cleaning your BAGPAX®
Clean your BAGPAX® after use.
You may use mild detergents like dishwashing liquid and a piece of cloth to clean your BAGPAX®.
Do not use aggressive detergents.
4. Mounting the BAGPAX in your trunk®
Fold out your BAGPAX in the loading area of
the trunk.
Attach the fastening cords to the loops of the
vacuum cups.
The fastening cord must be tightened
reasonably.
®
Open the zipper and place the protective rear
end over the bumper.
1.
2.
3.
Sicherheitshinweise
Sicherheitshinweise
Safety Instructions
Inflammable and Hot Materials
Hot materials may damage your BAGPAX®. Inflammable materials may be ignited by direct
exposure to sunlight.
Do not transport easily inflammable materials.
Do not transport hot or glowing materials.
Obstructed view through the rear window
The view through the rear window may be obstructed.
Use the BAGPAX® in cars that are equipped with two exterior mirrors.
Pull the fastening cords through the loops and
tie them to the respective loops of your
BAGPAX®.
It is not necessary to shorten the fastening
cords.
1. Unpacking your BAGPAX®
2. Mounting the Fastening Cords
Sicherheitshinweise
Installing your BAGPAX®
If the backseats are flipped over, the outer loops
to the right and the left should be used.
Open the carrying case and take out the
BAGPAX®, the fastening cords and the
vacuum cups.
Make sure that the carrying case is out of
reach of children when stored.
Clean the surface of your car windows and
press the vacuum cups onto the windows.
If the backseats are flipped over, place the vacuum
cups as indicated in the illustration above.
If the backseats are in an upright position, place the
vacuum cups as indicated in the illustration above.
3. Mounting the Vacuum Cups
If the backseats are upright, the two rear loops
should be used.
Danger of Suffocation
People or animals may suffocate in the BAGPAX®.
Never leave children unattended around your BAGPAX®.
Promptly put away the carrying case for your BAGPAX® after use.
DANGER
DANGER
WARNING
If it turns out that the BAGPAX® cannot be installed in your car, please contact the manufacturer.
Place the rear vacuum
cups on the inside of
the deck lid.
Open the zipper up
to the rim of the
trunk of your car.
ABC
DE
fastening cord; vacuum cup; hatch;
rim of the trunk; protective rear end.
1
AB
C
D
E
Close the zippers
after loading cargo
into your BAGPAX®.
2
In individual cases
you will have to
deviate from these
recommendations.
Loading Cargo
Using your BAGPAX®
Load all cargo after installing the BAGPAX® in your car.
DANGER
WARNING Overtaxing your BAGPAX®
Your BAGPAX® may be damaged if it is carried or moved while cargo is inside.
Load all cargo after installing the BAGPAX® in your car.
Unsecured Cargo
Unsecured Cargo in your BAGPAX® may be hazardous.
Secure cargo to prevent it from shifting on the slippery surface of the BAGPAX®. It is also
recommendable to secure cargo that has pointed or sharp edges.
Place heavy cargo on the bottom of your BAGPAX® and make sure that heavy cargo is in a
position that is no higher than 40 cm.
Closing your BAGPAX®