Baintex Easy Parking Basic User manual

1
With Easy Parking Basic, the garage door opens automatically when
the vehicle arrives, no need to touch your phone. Available for android
and iOS and compatible with Siri and Google Assistant for voice
opening.
CONTENTS
Includes:
●1 Actuator device
●1 Antenna
●1 Power supply 24V
TECHNICAL SPECIFICATIONS:
• Supply voltage: 18-48 VDC / 24-36 VAC
• Consumption: 360mW
• Maximum relay current: 10A
• Maximum relay voltage: 48V
• Communication technology: Bluetooth
• Maximum emission power:: 20dBm
• Power supply: In:230V, out:24VDC
EASY PARKING BASIC
Installation tools:
●1 terminal block
●Wire ferrule connector
●1 circular plates and screws
●Adhesives
QUICK GUIDE
Actuator device
Antenna

TERMINAL BLOCK
Installation by a professional is recommended. The actuating device
must not be wetted or come into direct contact with water. Install it
inside the engine control panel.
2
EASY PARKING BASIC QUICK GUIDE
INSTALLATION:
- Install the actuator device.
- Pinout terminal block description:
· Five position terminal block header.Wire Gauge
3mm² or 12AWG.
- Connect the antenna to the actuator device.
LINK TO THE APPLICATION:
- Download the EVEROU app and register.
- Select Access category.
- Add device.
baintex.com
QUICK INSTALLATION GUIDE
PINOUT TERMINAL BLOCK
DESCRIPTION
1+24V
2GND
3Output Circuit
4Input Circuit
5No connection
Actuator device
Antenna
Motor control board
Power supply
1
2
3
4
Installation video on our
channel ‘Baintex’