Baja motorsports TRAX6.5 Manual

Trax6.5 Set up Instructions
1. Remove cardboard box from metal
frame. Remove all straps holding any parts
to metal frame.
Removal of crate
Straps
REV. B

Front Brushgaurds
Headlights
Headrest seat-
belt assembly
Top/Rear
brushguard
Rear wheel Rear wheel
M10x25
QTY 8 M8x40
QTY 2
M8x50
QTY 4 M8x55
QTY 4
M10x70
QTY 2 M12x55
QTY 2
Seatbelt Spacer
M8 QTY 8
M10 QTY 2
M12 QTY 2
Parts and Hardware
Headrest seat-
belt assembly

5. Attach Top/Rear brushgaurd
to rear of frame. 6. Attach front brushgaurds to
top/rear brushgaurd.
3. Attach both rear wheels
using M10x25 bolts provided.
Torque bolts to 35 ft●lbs.
Rear Wheel Assembly
Brushgaurd Assembly

7. Attach headlights to top of
brushgaurds
8. Attach passenger handlegrip to frame.
Headlight Assembly
Passenger handlegrip Assembly

9. Attach middle divider to center
of oorboard.
10. Attach left and right headrests to
top/rear brushgaurd.
Middle Divider Assembly
Headrest Assembly

12. Attach steering height turn buckle to
frame, adjust to desired height..
13. Attach sttering wheel to steering shaft
11. Attach steering shaft to front of frame.
Steering Wheel Assembly

14. Attach driver and passenger seatbelt
to frame behind seat.
Seatbelt Assembly

15. Fill engine with correct amount of oil. Refer to
owners manual for oil types and quantity.
16. Fill gas tank as specied in
owners manual.
17. Refer to owners manual for
proper starting instructions.
!!WARNING!!
This vehicle may be shipped with packing oil in
the engine. This oil should be drained and
replaced with new engine oil as described in the
owners manual. Never attempt to start the
engine without rst replacing the engine oil with
the proper amount and grade as described in the
owners manual.
Gas and Oil Assembly