Bakare Klearside Impulse Series User manual

The Klearside® User Manual
Page 1
BaKare Beds The Klearside® Manual Last updated March 2019 © BaKare Beds 2019 Issue 09
Contents List
Page
Contact Information 1
Declaration Of Conformity 2
Installation Instructions 3
Handset Function 4
Safe Operation of Side Rails
Operating the Side Rails 6
Cleaning & Disinfection 7
Service And Inspection Record 8
Contact Information : BaKare Beds Ltd
Unit 1, Bluewater Estate
Bell Close
Plympton
Devon
PL7 4JH
!
IMPORTANT
This symbol highlights critical safety information that must
be followed
Sales
Tel : [phone]
Fax : [phone]
Customer Support
Tel : [phone]
Fax : [phone]
!
IMPORTANT
This Product is a Medical Device and should not be used without a Risk Assess-
ment in place. The Klearside® side panels should be assessed against any ten-
dency of the end user to push themselves down between the mattress and the
Klearside® panel in particular.

The Klearside® Declaration Of Confor ity
Page 2
BaKare Beds The Klearside® Manual Last updated March 2019 © BaKare Beds 2019 Issue 09
EU Directive 93 42 EEC
The signatory
BaKare Beds Ltd
Unit 1 ERC
Bell Close
Plympton
Plymouth
PL7 4 JH
Confirms that the products described below and in the form distributed by ourselves meet the
basic requirements of Appendix 1 of EU directive 93 42 EEC.
The following Standards apply
EN 60601-1
EN 60601-1-2
EN 60601-2-52
(applicable parts only)
The requirements of the medical products law pertain to the display of a CE seal of approval
are thereby fulfilled.
This declaration of conformity becomes invalid if the products are altered without the written
agreement of the manufacturer.
Product description
Nursing beds Impulse Evolution Series
Directive 93 42 EEC of 14 06 1993 concerning medical products. (Appendix I basic require-
ments). The testing and construction of this product conforms to a Class 1 (Appendix VII) of
Medical Product Law of 02 08 1994
Signed
Steven John Baker : CEO Bakare Beds Ltd

Installation Instructions
• Ensure that there is sufficient clearance around the bed so that it will not
make contact with any other objects when in operation
• The bed must be used on an even and flat surface
• Ensure that the space under the bed is clear
• Ensure that all cables are free from potential entrapment.
• IMPORTANT : THE KLEARSIDE® BED MUST BE USED IN CONJUNCTION
WITH THE KLEARSIDE® MATTRESS TO AVOID ENTRAPMENT ISSUES
Warranty
Maintenance
The bed and motor system is covered by a 2 Year Parts warranty for
manufacture defects. It does not cover damage resulting from abuse or misuse
of the bed.
We do not accept liability for damage and disruption caused by operating errors
The bed should be inspected on a regular basis to ensure :-
• That there is nothing trapped within the mechanism of the bed.
• That the functions of the bed operate correctly.
• The wooden slats and holders are undamaged and secure.
• There are no loose fastenings.
• The Klearside® Vinyl sides are correctly tensioned.
• The wheels are free to run and brakes can be operated
At least once a year
• Ensure that all fastenings are tight.
• Unplug the bed from the mains and check for damage along the cables.
• Grease the joins of the lifting bar from the motor.
• The bed is to be inspected by a BaKare technician or a qualified person
trained by BaKare.
• The Klearside® Vinyl sides are correctly tensioned
Page 3
BaKare Beds The Klearside® Manual Last updated March 2019 © BaKare Beds 2019 Issue 09
!

Operating Instructions Handset Function
Raise Bed
Raise Head
Lower Bed to
Transfer Position
Lower Foot
Lower Head
Raise Foot
Lower Foot &
Head
Raise Foot & Head
Tilt Head End Up
Tilt Head End
Down
1 Button Chair
Position
Handset Lockout
(See Note 2)
Notes
1. To operate hand controller press and hold the button, once the button is re-
leased, the bed will stop moving.
2. The tilt function of the bed is lockable with the blue disc key. In order to oper-
ate the tilt function the symbol I must be visible in the window of the disc
when inserted in the key hole in the back of the hand control.
Page 4
BaKare Beds The Klearside Manual Last updated March 2019 © BaKare Beds 2019 Issue 09
Lower Bed to
Lowest Position

Page 5
BaKare Beds The Klearside® Manual Last updated March 2019 © BaKare Beds 2019 Issue 09
Operating Instructions
Safe Operation of The Klearside® Side Rails
1. The side rails should be operated with the bed in its lowest posi-
tion, this provides the safest position for the occupant of the bed
and the easiest position for the carer to operate the side rails.
2. When raising the side rails, first raise the head end of the rails
by holding the top rail and lifting (see page 6 for details), when
the head end is locked in place proceed to raise the foot end of
the rails using the lifting strap to gain extra purchase and allow-
ing the side to become tensioned.
3. When lowering the side rails repeat point 2 in reverse order.
Having the head end of the rails raised at all times when adjust-
ing the foot end provides additional protection to the occupant of
the bed.
4. Whenever the bed is left occupied and unattended it should be
in its lowest position.
Warning— Both ends of the side rail ust be raised when the bed is
occupied.
Warning— Users are at risk of serious injury if they atte pt to cli b
over the top of the side rails. Always leave the bed in its lowest posi-
tion when occupied and unattended
Warning— The Klearside® is unsafe for use if a tear occurs on the
Klearside.
Warning– Ensure Vinyl is correctly tensioned before use
Safety—Side rails ust only be used after a full risk assess ent has
been carried out.
!
!
!
!
!

Page 6
BaKare Beds The Klearside® Manual Last updated March 2019 © BaKare Beds 2019 Issue 09
Operating Instructions
Operating The Klearside® Side Rails
Raising (Head end) Raising (Foot end)
Raising the head-end first means
there is reduced risk of occupant fal-
ling from bed. To raise the head end
side rail:
1) Depress the top button on the
side of the head board.
2) Pull the side rail up until it is
higher than the button. Then
release the button.
To raise the foot end side rail:
1) Depress the top button on the
side of the foot board.
2) Pull the side rail up using the
hand loop until it is higher than
the button. Then release the
button.
Warning— Both ends of the side
rail ust be raised.
1
2 2
To further reduce the risk of entrap-
ment, we recommend securing the
Klearsides to the head/foot boards
using the supplied Velcro.
Attaching Velcro Lowering
Lowering the side rails means follow-
ing the previous steps in reverse,
starting from the foot end.
Warning— Both ends of the side
rail ust be lowered.

Wipe Disinfection
Use a wipe Sodium Hypochlorite Disinfectant using no more that 1000 parts per million
of Active Chloride
Wooden parts may not get into contact with the relevant cleaning agent.
The use of solvents is not per itted.
Do not use abrasive cleaners, scouring pads or similar cleaning aids.
Do not use organic solvents such as halogenated/aromatic hydrocarbons and ketone
Please follow these instructions when using cleaning agents and/or disinfectants:
- Decontamination solutions in the prescribed concentrations may not exceed or fall
below a pH-value of 6-8.
- They may not contain any corrosive or caustic substances.
- They may not contain substances that alter the characteristics of the surface or the
properties of plastic or synthetic materials.
- They may not affect the properties of the lubricants.
- Water hardness may not exceed 0.9 mmol/l (to °d).
(Fully desalinated water may not be used)
We accept no liability for possible damage to surfaces arising from the use of unsuitable
cleaning agents or disinfectants, from the use of incorrect concentrations or from the
unsatisfactory care of the bed.
Risk of electric shock, fire or breakdown
Only clean and disinfect the bed after it has been switched off, i.e. when it has been
disconnected from the mains power supply (pull plug out of socket).
Protect electrical components from water!
Spray wands
Cleaning and disinfection with spray wands is prohibited.
The beds are not designed to be used with jet stream plants!
The Klearside® Cleaning & Disinfection
Page 7
BaKare Beds The Klearside® Manual Last updated March 2019 © BaKare Beds 2019 Issue 09
BaKare beds makes every effort to ensure that this document is up to date but does
reserve the right to make changes to its products without prior notice.
For the latest information please contact us.

Service & Inspection Record
The bed is to be inspected by a BaKare technician or a qualified
person trained by BaKare every 12 onths.
Bed Serial Number ___________________________________
BaKare servicing department : 017 2 12227
Please call for information on servicing, repairs and extended
warranties.
INSPECTION
DATE COMMENTS ACTION TAKEN ENGINEERS SIGNATURE
Page 8
BaKare Beds The Klearside® Manual Last updated March 2019 © BaKare Beds 2019 Issue 09
!