BALDR B0359STHR User manual

MODEL:B0359STHR
DIGITAL RADIO CONTROLLED ALARM
CLOCK WITH MOON PHASE
QUICK SETUP GUIDE
1

2
POWER ON
MAIN UNIT SETUP
1.Main Unit Installation
1.After Power On
AC Hole
Step1, Peel off the protecting
mask of main unit.
Step 3, Remove the built in cell battery insulation strip.
LCD will full display for 3
seconds with “BI” sound.
Step 2,Plug the AC Adaptor
to a powered outlet.
After 3 seconds, the LCD will
display the datas as below
1. Time (Calibration after RCC signal received or manual setup)
3.Moon
Phase
2.Temperature
and humidity
1. Top button: Adjust the backlight or turn on / off
the snooze function;
2. “ SET ” button: Enter into time setting;
3. “ ▲ ” button: Increase the data;
4. “ ▼ ” button: Decrease the data;
5. “ ” button：Check alarm time,turn on/off alarm,
enter into alarm setting.
6. “ RCC ” button：Enter into RCC setting
7. “ MEM ” button: Check or clear Max/min record;
BUTTON DESCRIPTION
5.RCC radio
signal
receiving
icon
(flashing)
4. Date and weekday (Calibration after
RCC signal received or manual setup)

3
2.RCC Atomic Radio Signal Receiving Mode
Automatically starts after powering up
No RCC Radio Signal Received
The antenna signal “ ” is flashing.
During receiving, no button
will function, except for the top
button and “ RCC ”button.
Press “RCC ” button will allow
exiting the Atomic mode to
continue manual setup.
Antenna
Signal
The antenna signal “ ” will
disappear.
SET
RCC
MEM
SET
RCC
MEM
Press and hold “RCC” button for
3 seconds to search RCC
radio signal again.
SET
RCC
MEM
SET
RCC
MEM

4
● Press and hold “SET” button to
enter into setup (3 seconds).
● Press and release “SET”
button to skip setting or go to
next setting option(1 second).
Manual setup SETUP ORDER
Weekday
Language
1
Time
Zone
4
Minutes
7
Year
8
Month/Date
Display
Format
9
Month
10
Key Tone
13
Date
11
Temperature
Unit
12
12/24
Time Format
5
Hours
6
RCC
ON/OFF
2
DST
ON/OFF
3
SET
RCC
MEM
SET
RCC
MEM
Press “▲”to increase the values.
*Tips: Press and hold “▲” or “ ▼” button will quickly change the value.
SET
RCC
MEM
SET
RCC
MEM
Press “▼”to decrease the values.
SET
RCC
MEM
SET
RCC
MEM

5
3.Alarm Time Setting
Step1, Press and hold “ ” button
to enter into alarm time
setting mode.
Alarm symbol
After the alarm time was set, there is a symbol in the screen.
Step 2, Press “▲” or “ ▼” to
adjust alarm time.
SET
RCC
MEM
SET
RCC
MEM
SET
RCC
MEM
SET
RCC
MEM

6
4. Alarm ON/OFF Setting
Time Display Mode In time display mode, press “ ”
button twice to turn ON/OFF alarm
by the ON/OFF of symbol .
SET
RCC
MEM
SET
RCC
MEM
Alarm Time Display Mode In alarm time display mode, press
“ ” button to turn ON/OFF alarm
by the ON/OFF of symbol .
SET
RCC
MEM
SET
RCC
MEM

7
This Qucik Start is to help you quickly set up the product. For detailed
settings, please refer to the user manual, or scan the QR code below
for relevant product information and operation video link.Thank you.
www.baldr.com
[e-mail]