
Estimated Assembly Time: 15 minutes
Tools required for assembly (not included): Phillips screwdriver
Before assembling product, make sure all parts are present. Compare parts with package contents
list and hardware contents list. If any part is missing or damaged, do not attempt to assemble
the product.
WARNING:
CAUTION: Assemble the fire pit on a non-abrasive surface.
1)FOR OUTDOOR USE ONLY.
2) Do not use the fire pit indoors. Carbon monoxide fumes, due to lack of ventilation, can cause
death.
3) Do not use gasoline or kerosene to start fires in the fire pit. Keep all flammable liquids away
from the fire pit.
4) This unit is designed to burn charcoal and untreated wood only.
5) Do not use under or on combustible structures/surfaces including wooden decks.
6) Use long-handled fire tool with this fire pit.
7) Dispose of packaging materials properly.
8) Keep children away from hot fire pit.
9) Fire pit remains very hot for a period of time after using.
10) Be sure fire pit is cool before attempting to move it.
11) Do not place the protective cover too close to fire pit when it’s burning.
12) Do not let hot or burning debris from the fire get inside the protective cover.
13) Do not burn more than 1.6 lbs. of charcoal or 3 lbs. of untreated wood at one time.
14) The handles of the tools may become hot during and after use.
15) The fire pit should be placed no closer than 24 in. from walls during use.
PREPARATION
Please read and understand this entire manual before attempting to assemble, operate or
install the product.
CALIFORNIA PROPOSITION 65 WARNING
This product can expose you to chemicals including soot, which is known in the State of
California to cause cancer, and carbon monoxide, which is known to the State of California to
cause birth defects or other reproductive harm. For more information, go to:
www.P65Warnings.ca.gov.
Safety Informations
Page 4 of 8