Ballard Designs August LL375 User manual

PRODUCT NAME: August Floor Lamp
ITEM NUMBER: LL375
ASSEMBLED DIMENSIONS: 64”H x 16”Diameter
PRODUCTS ARE NOT INTENDED
FOR COMMERCIAL USE.
Page 1 of 3
MADE IN CHINA
IMPORTANT SAFETY INSTRUCTIONS:
-This Lamp has a polarized plug (one blade is wider than the other) as a feature to reduce the risk
of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fully fit in
the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use with an
extension cord unless plug can be fully inserted. Do not alter the plug.
-For your safety, please read instructions carefully and completely before beginning assembly
or installation.
-Product must be installed according to applicable code(s) by a person familiar with its construction
and operation.
-This Lamp socket rated up to 100 Watt MAX Type A Bulb (not included). LED recommended.
WARNING:
-Deviation from assembly instructions may cause risk of fire or electric shock.
-To reduce risk of personal injury, always turn off fixture and allow bulb to cool prior to
replacement.
-Do not touch or look directly at illuminated bulb.
-Keep flammable material away from illuminated bulb.
UPDATED: 4-21-2022
Customer Service: 800-367-2810
Online: www.ballarddesigns.com

Approved Location for Use: Dry Indoor Environment
Assembly Time: 10 Minutes
HARDWARE AND COMPONENTS
INCLUDED:
Page 2 of 3
NOT INCLUDED:
(1) - 100 Watt Max
Type A Bulb
*LED recommended.
Unplug lamp prior to installation or removal.
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
100
WATT
MAX
Remove all parts, hardware and protective packaging from
carton and carefully arrange on a clean, level surface.
Prevent accidentally discarding small parts or
hardware. Retain all carton contents until assembly
and installation are complete.
1 - Shade/Socket (A)
3 - Stems (B)
1 - Base (C)
1 - Base Pad (D)
Cleaning and Care
Periodically wipe Lamp with a soft, dry cloth.
Avoid harsh or abrasive chemicals as
finish damage may result.

Page 3 of 3
Unplug lamp prior to installation or removal.
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
Lower Energy Consumption
CONSIDER USING LED BULBS
Minimal Heat / Longer Life / High Illumination

Light
Output
LED
Incandescent
(Lumens)
450 4-5 40
6-8 60
9-13 75
16-20 100
25-28 150
800
1,100
1,600
2,600
Energy Consumption
(Watts)
STEP 3: Insert, turn and tighten Bulb (not included)
into socket. Socket rated up to 100W MAX Type A
Bulb.
LED recommended. To mimic the color of an
incandescent, choose 2700K, Soft White.
STEP 1: Carefully arrange, turn and tighten Shade/Socket (A) to Stems (B)
and Base (C). Pull excess cord through Base.
Do not twist lamp cord while
turning these pieces together.
(E)
(C)
(B)
(A)
STEP 2: Prepare then adhere Base Pad (D) onto
underside of Base (C).
(C)
1
3
2
100
WATT
MAX