Ballard Designs Peyton LL331 User manual

PRODUCT NAME: Peyton Floor Lamp
ITEM NUMBER: LL331
ASSEMBLED DIMENSIONS: 55”H x 10” Diameter
PRODUCTS ARE NOT INTENDED
FOR COMMERCIAL USE.
Page 1 of 3
MADE IN INDIA
IMPORTANT SAFETY INSTRUCTIONS:
-This Lamp has a polarized plug (one blade is wider than the other) as a feature to reduce the risk
of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fully fit in
the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use with an
extension cord unless plug can be fully inserted. Do not alter the plug.
-For your safety, please read instructions carefully and completely before beginning assembly
or installation.
-Product must be installed according to applicable code(s) by a person familiar with its construction
and operation.
-This Lamp socket rated up to 100 Watt MAX Type A Bulb (not included). LED recommended.
WARNING:
-Deviation from assembly instructions may cause risk of fire or electric shock.
-To reduce risk of personal injury, always turn off fixture and allow bulb to cool prior to
replacement.
-Do not touch or look directly at illuminated bulb.
-Keep flammable material away from illuminated bulb.
UPDATED:
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
3-1-2023

Approved Location for Use: Dry Indoor Environment
Assembly Time: 10 Minutes
HARDWARE AND COMPONENTS
INCLUDED:
Page 2 of 3
NOT INCLUDED:
(1) - 100 Watt Max
Type A Bulb
*LED recommended.
Unplug lamp prior to installation or removal.
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
100
WATT
MAX
Remove all parts, hardware and protective packaging from
carton and carefully arrange on a clean, level surface.
Prevent accidentally discarding small parts or
hardware. Retain all carton contents until assembly
and installation are complete.
1 - Socket Assembly (A)
1 - Upper Stem (B)
1 - Base (D)
Cleaning and Care
Periodically wipe Lamp with a soft, dry cloth.
Avoid harsh or abrasive chemicals as
finish damage may result.
1 - Finial (F)
1 - Harp (E)
1 - Lower Stem (C)
UL Standard requires shade to be open
on both top and bottom.
Critical Radius is distance between
bulb center and side of shade. For this
lamp it should NOT be less than *3 1/2”
WARNING
FIRE HAZARD
Side
of Shade
Critical
Radius
*Based on a 100W Incandescent Bulb
Shade
Sold Separately
i

Page 3 of 3
Unplug lamp prior to installation or removal.
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
STEP 3: INSTALL BULB AND SHADE
STEP 1: Carefully arrange, turn and tighten Lower Stem (C) to Base (D). Next, insert, turn and tighten
Upper Stem (B)/ Finally, turn Socket Assembly (A) onto Upper Stem. Pull excess cord through Base.
STEP 2: Add Harp (E) to Saddle.
1
3
2
100
WATT
MAX
Do not twist lamp cord while
turning these pieces together.

Scan this QR Code
to learn more
regarding
LED BULBS
and how to best use them
with your new lamp!
(F)
(E)
Saddle
Add Shade (Sold Separately) followed by Finial (F).
Turn and tighten Finial until Shade is secured.
Shade
Sold Separately
SOCKET RATING: 100W MAX Type A Bulb
*LED bulbs permit a brighter bulb without exceeding
socket rating. (Scan QR Code below for details)
LUMENS (lm): Light output (brightness)
KELVIN (K): Light color. (orange/golden/white/blue)
Kelvin Range: 1800K (orange) to 6000K (white)
To mimic the color of an incandescent bulb, choose
2700K (Soft White).