Ballard Designs LK002 User manual

PRODUCT NAME: Desta Rattan Task Lamp
ITEM NUMBER: LK002
ASSEMBLED DIMENSIONS: 28 1/2”H x 8 1/2”D
PRODUCTS ARE NOT INTENDED
FOR COMMERCIAL USE.
Page 1 of 2
MADE IN INDIA
IMPORTANT SAFETY INSTRUCTIONS:
-This Lamp has a polarized plug (one blade is wider than the other) as a feature to reduce the risk
of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fully fit in
the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use with an
extension cord unless plug can be fully inserted. Do not alter the plug.
-For your safety, please read instructions carefully and completely before beginning assembly
or installation.
-Product must be installed according to applicable code(s) by a person familiar with its construction
and operation.
-This Lamp rated up to 60 Watt MAX Type A Bulb (Not Included).
WARNING:
-Deviation from assembly instructions may cause risk of fire or electric shock.
-To reduce risk of personal injury, always turn off fixture and allow bulbs to cool prior to
replacement.
-Do not touch or look directly at illuminated bulbs.
-Keep flammable material away from illuminated bulbs.
UPDATED: 12-6-2021
Customer Service: 800-367-2810
Online: www.ballarddesigns.com

Remove all parts, hardware and protective packaging from
carton and carefully arrange on a clean, level surface.
NOTE: To avoid accidentally discarding small parts or
hardware, retain all carton contents until after assembly
and installation are complete.
Recommended Location for Use: Dry Indoor Environment
Assembly Time: 25 Minutes
HARDWARE AND COMPONENTS
Page 2 of 2
NOT INCLUDED:
1- 60 Watt Max
Type A Bulb
*LED recommended
Unplug lamp prior to installation or removal.
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
Shade
Hardware
Cord
60
WATT
MAX
Lamp Base (A)
Shade (B)
Socket Ring (C)
Ships attached to Socket
Light
Output LED Incandescent CFL
Lumens Watts Watts Watts
450 4-5 40 9-13
6-8 60 13-15
9-13 75 18-25
16-20 100 23-30
25-28 150 30-55
800
1,100
1,600
2,600
Energy Used
*NOTE: To obtain greater light output without
exceeding the socket’s wattage limitation, consider
using an LED or CFL bulb which uses less than a
tenth of the energy as that of a standard incandes-
cent. To mimic the color of an incandescent,
choose 2700K Soft White. See below:
Cleaning and Care
Periodically wipe Lamp with a soft, dry cloth.
Avoid harsh or abrasive chemicals as
finish damage may result.
NOT
INCLUDED
SIMPLE ASSEMBLY: Remove Socket Ring (C) from Socket. Slip
Shade (B) over Socket then secure by replacing and tightening
Socket Ring.