BALMUDA M01G-BK User manual

Control Code
Rev1.0
Instruction Manual
Wireless Speaker (For Household Use)
M01G-BK
Important Be sure to read this manual before use.
Keep in a safe place for future reference.
For information on warranty policy, please refer to the BALMUDA
website (https://us.balmuda.com).
LimitedWarranty

- 1 -
Contents
Introduction ....................................................................................... 2
Safety Precautions ............................................................................ 3
Contents of the Package ................................................................. 10
Names of Parts ............................................................................... 11
Before Use ...................................................................................... 14
Installation ................................................................................... 14
Charging...................................................................................... 16
Listening to Music ........................................................................... 18
Turning on/off .......................................................................................18
Pairing (registering) a smartphone, PC, etc. ................................ 18
Connecting an external device .................................................... 20
Playing music .............................................................................. 20
Changing lighting patterns (Light modes) .................................... 21
Maintenance ................................................................................... 22
Error Indication................................................................................ 23
Troubleshooting .............................................................................. 23
Specifications ...........................................................................................26
Equipment Certification/Trademarks.....................................................28
Built-in Lithium-Ion Battery .............................................................. 29
Warranty Policy and Privacy Policy................................................. 30

- 2 -
Introduction

- 3 -
WARNING
CAUTION
Indicates actions that may cause death or serious
injury .
Indicates actions that may cause minor injury .
Indicates prohibited actions that must not be performed.
Indicates required actions that must be performed.
Indicates risk of electric shock .
Read the Safety Precautions carefully before use to ensure correct operation.
The precautions described in this manual must be followed to ensure safe use
of this product and prevent hazards to you and other people, as well as damage
to the product and your home or property.
●These symbols indicate the degree of harm or damage that may be caused
by improper use.
NOTICE
Indicates a property damage .
●These symbols indicate requirements during use of this product.
Safety Precautions

- 4 -
WARNING
Do not disassemble,
repair, or modify this
product.
Doing so may cause
accidents or injuries due to
electric shock, combustion,
or malfunction. For repair,
please contact BALMUDA
Support. (p. 30)
Do not apply water or
any kind of liquid to the
AC adapter or touch it
with wet hands.
Doing so may cause electric
shock or malfunction.
Do not apply water or
any kind of liquid to
the main body.
Doing so may cause electric
shock or malfunction.
Do not use the product
within reach of children
or pets.
Doing so may cause the
product to fall or drop and
cause accidents or injuries.
Do not use the main
body or AC adapter if
they are damaged and
do not work properly
due to being dropped,
etc.
Doing so may cause fire
or electric shock. If the
main body or AC adapter
is damaged, stop using
immediately and contact
BALMUDA Support.
(p. 30)

- 5 -
Do not use, store or
leave the product in
a high temperature
environment. Do not
place the product near
open flame or in hot
vehicles or expose it
to direct sunlight.
Doing so may cause
fluid leakage, explosion,
overheating or other issues
with the built-in battery
and lead to fire, injury
or contamination of the
surroundings.
Do not look directly at
the LED light source
for an extended period
of time.
Doing so may damage your
eyes. The light should be
looked at from a distance.
If you feel sick, stop use of
the product and consult a
doctor immediately.
Do not connect any
cables to the charging
terminal other than
the AC adapter cable
supplied with this
product.
Doing so may cause
combustion or malfunction.
Do not cover the main
body with a blanket and
the like.
Doing so may result in heat
accumulation, causing fire
or deformation of the case.

- 6 -
If there is fluid leakage
from the built-in
battery, make sure
it does not come in
contact with your skin
or eyes.
Failure to do so may cause
damage to your skin or loss
of your eyesight. If the fluid
contacts your skin or eyes,
wash it off thoroughly with
clean water, and consult a
doctor.
Stop using the product
immediately since there may
be fluid remaining inside
the product and contact
BALMUDA Support. (p. 30)
Do not put any foreign
objects or substances
in the opening of the
speaker unit.
Doing so may cause
accidents or injuries due to
electric shock, combustion,
or malfunction.
If an abnormality or a
failure is found in the
product, disconnect
the power plug,
and stop use of the
product immediately.
Failure to do so may cause
fire, electric shock, or injury.
Clean the product
periodically and
disconnect the AC
adapter when the
product is unused for
a long period of time.
Dust accumulation on the
AC adapter may cause
insulation failure due to
humidity or other factors
and cause fire.

- 7 -
CAUTION
Do not use the wireless function in the following
circumstances.
The product is equipped with a built-in wireless function. Pay attention
to the following, and turn off the power immediately in case of any
disorder. Radio waves may interfere with other devices, and cause
malfunction which may lead to accidents and injuries.
• Do not use the product inside medical facilities such as
hospitals, or near medical electrical equipment.
• Do not use the product near automatic control equipment, such
as an automatic door or a fire alarm.
• Do not use the product inside an aircraft.

- 8 -
Do not use the product
within an 8.7 inch
(22 cm) range from a
cardiac pacemaker.
The product contains
magnetic materials. For
details of their effect on
implanted medical devices,
consult a doctor.
Do not drop, hit, apply
strong impact to, or
damage the product.
Debris scattering from
the damaged or dropped
product may cause injury.
Pay attention especially
when carrying the main body
or performing maintenance.
Do not put any object
on top of the main
body.
Doing so may cause a
failure, accident, or injury if,
for example, the main body
falls over and the object
breaks.
Do not use the product
in any countries other
than the U.S.
Since other countries
impose their own restrictions
on use of radio waves, using
the product may be subject
to punishment.
Do not use, store,
or leave the product
where water may
be splashed on it or
where there are large
amounts of humidity,
dust, soot or steam.
The product is not
waterproof. If the product
is splashed with water, the
terminals or other parts may
be short-circuited, causing
malfunction or failure.

- 9 -
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following
measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the userʼs authority to operate the equipment.

- 10 -
ーーーーーー
ーーーーーー
ーーーーーーーーーーーーーーーーー ーーーーーーーーーー
ーーーーーーーーーーーーーーーーー
ーーーーーー ーーーーーーーーーーーーーーー
ーーーーーーーーーーーーーーー
ーーーーーーーーーーーーー
ーーーーーーーーーーーーー
ーーーーーーーーーーーーー
ーーーーーーーーーーー
------ ------ -----
----- -- ------ ---- - --- - ----
Contents of the Package
Main body AC adapter (1)
Instruction Manual Start Guide (1)

- 11 -
Opera
panel
Reset
Speaker
unit
Names of Parts
Front Rear
Clear cover
LED unit
tion
Base
button
AC adapter
Adapter plug
Power plug

- 12 -
Operation panel
1 2 3 4
5 6 7
Bottom
8

- 13 -
1. Power button (POWER)
Power on/off
Press to turn the power on/off.
Checking the battery level
Hold down for 2 seconds. The
remaining battery level will be
indicated on the volume indicator.
2.
Volume indicator
Displaying the volume
Press to display the volume. The
volume is stored separately when
connected by Bluetooth or an external
input terminal.
3.
Light button (LIGHT)
Switching the Light modes
Press to change the lighting modes.
The three modes, Beat, Ambient and
Candle are switched in a loop. (p. 21)
Pairing
Hold down the button for 2 seconds to
start standby for Bluetooth pairing.
(p. 18)
4.
Charge indicator
The indicator lights up while the
battery is being charged. When the
battery is fully charged, the indicator
will go off. The indicator blinks when
the battery is low.
5.
External input terminal (AUX)
You can use various music players
by connecting them via a cable (retail
product).
6. Volume button (VOLUME)
Adjusting the volume
Pressing “+” or “-”increases or
decreases the volume, respectively. The
volume can be adjusted in 10 steps.
7.
Charging terminal (DC IN)
You can charge the battery by using
the AC adapter supplied with the
product.
8.
Reset button
While the AC adapter is disconnected,
holding down the button for
approximately 10 seconds turns off the
power. Use this function if the power
cannot be turned off with the power
button. The information on the volume,
the registered paired devices, etc. will
not be reset.

- 14 -
Installation
Before Use
Install the main body in a horizontal and stable location and pay attention to the
following.
Do not use the product while it is laying on its side.
Do not use the product in places shown below.
• Outdoors. This product is for household use only. Use only indoors.
• An unstable surface
• At the end of a desk/table where the product may easily fall.
• Places that reach high temperature or humidity or where water may
splash such as a bathroom or near a humidifier.
• Within the reach of children or pets
• Where water may be splashed on the product or where large
amounts of humidity, dust, soot or steam are present.
• Where temperature tends to be high, such as places exposed to
direct sunlight or near a heater.
• In a high position where the product may fall and cause harm or
damage.
• Where other objects may be caught in the cable when using the AC
adapter.
• Surfaces with special finish such as wax or oil finish that may cause
color migration or discoloration in the main body.

- 15 -
Take care to avoid improper use of the cord. Never carry
the product by the cord or yank the cord to disconnect
from the outlet.
Keep the cord away from heat, oil, and sharp edges.
When carrying the main body, use both of your hands to
hold and support the upper part of the main body and
the bottom of the base. In addition, pay attention to the
following points.
• Do not hold the clear cover.
• Do not place credit cards or other objects sensitive to magnetism
near the product.
• Do not hit or bump the product.

- 16 -
WARNING
Charging Be sure to charge the product before first use.
Do not use any adapters other than the AC adapter
supplied with the product.
Do not use the supplied AC adapter for other products.
Doing so may cause fire or malfunction.
Do not perform any of the following actions for the AC
adapter.
Doing so may cause fire or electric shock due to damage.
Damaging, stretching, processing, putting close to a heater, bending,
bundling, trampling, or placing an object on the AC adapter
Do not disconnect or insert the AC adapter with a wet
hand.
Doing so may cause electric shock.
Never charge the battery if the main body or the AC
adapter is wet. Do not charge the battery in a place
where the main body or AC adapter could become wet.
Liquid (tap water, seawater, drinks, etc) or other foreign substances
that attach to the main body or AC adapter may cause a short circuit,
resulting in excessive heating or malfunction.

- 17 -
1
2
Do not touch the AC adapter or the main body for an
extended period of time when applying current.
Doing so may cause low temperature burns.
Fully insert the adapter and power plug all the way to
their base.
Failure to do so may cause combustion due to poor contact.
1
Connect the adapter plug of the AC adapter supplied with the product
to the charging terminal.
2
Connect the power plug of the AC adapter to the outlet.
The charge indicator lights up. When the battery is fully charged, the
indicator will go off.
Note: When the product is not used for an extended period of time,
charge the battery approximately every 3 months to prevent battery
deterioration.

- 18 -
Listening to Music
Turning on/off
• Pressing the power button switches on/off the power.
• If the product is not used or emits no sound for a specified period (4 hours
when battery powered, 8 hours when connected with the AC adapter), the
product is automatically turned off.
Pairing (registering) a smartphone, PC, etc.
1
While the power is on, hold down the Light button for 2 seconds.
A notification sound is played and the standby for the pairing is started.

- 19 -
2 Enable the Bluetooth function of your smartphone, PC, etc.
Enable the Bluetooth function on the setting screen of your smartphone,
PC, etc.
Note: For details, check with the instruction manual or help function of your
smartphone, PC, etc.
3
Select “BALMUDA M01” from the displayed connection list.
A sound notifying you of the completion is played, and the pairing is
completed.
Note: A maximum of 8 devices can be stored as the connection
destinations.
Canceling the pairing
The pairing is canceled if one of the following occurs.
• The Light button is pressed during the pairing standby, or the pairing
cannot be established within 1 minute
•The Bluetooth function of your smartphone, PC, etc. is disabled after the
pairing is completed