BaltLED BWLH-02584060 User manual

1/4www.baltled.com
26th October, 2018
© 2018, All rights reserved BaltLED, UAB. Specifications are subject to change without notice.
FULMAR INDUSTRIAL LUMINAIRES INSTALLATION GUIDE
READ THE INSTRUCTIONS CAREFULLY BEFORE STARTING
INSIDE THE BOX
WARNING
NEEDED FOR MOUNTING
•Properly ground electrical enclosure.
•Perform installation in dry location only.
•Luminaire may fall down if not installed properly.
•Avoid direct eye exposure to the light source while it is on.
•For indoor use only.
•Do not operate luminaire with damaged parts.
•To prevent wiring damage or abrasion, do not expose wiring to
edges of sheet metal or other sharp objects.
•The manufacturer shall not be liable for any damage
resulting from inappropriate modifications to the
luminaire or faulty installation.
If you have any questions, contact the manufacturer.
*Fulmar luminaires are the same height except for Fulmar H 120
and Fulmar HT 120, which H = 100 mm
L,
mm W, mm H, mm
252 / 277 / 520 / 1007
/ 1010 / 1506 / 2010 75 75*
! Turn power off before inspection, installation or removal.

2/4
FULMAR H 120
© 2018, All rights reserved BaltLED, UAB. Specifications are subject to change without notice.
SURFACE MOUNTING
1 2
3 SCREWING 4
5 6
7 8
www.baltled.com
26th October, 2018
FULMAR INDUSTRIAL LUMINAIRES INSTALLATION GUIDE

3/4
FULMAR H 120
© 2018, All rights reserved BaltLED, UAB. Specifications are subject to change without notice.
SURFACE MOUNTING
9
11
10 BROWN –L, BLUE –N, YELLOW/GREEN - PE
www.baltled.com
26th October, 2018
FULMAR INDUSTRIAL LUMINAIRES INSTALLATION GUIDE
STANDARD
DALI
(L)–line (brown)
(N) –neutral (blue)
(PE) –protective earth
(green/yellow)
(L)–line (brown)
(N) –neutral (blue)
(PE) –protective earth (green/yellow)
EMERGENCY (L) –line (black)
EMERGENCY (N) –neutral (grey)
(L)–line
(N) - neutral
(PE) –protective earth
(green/yellow)
DALI line (black)
DALI line (grey)
(L)–line (brown)
(N) –neutral (blue)
(PE) –protective earth (green/yellow)
EMERGENCY (L) –line (black)
EMERGENCY (N) –neutral (grey)
DALI line (white)
DALI line (red)
CONNECTION SCHEME
EMERGENCY
EMERGENCY + DALI
QUANTITY OF LUMINAIRES PER CIRCUIT BREAKER
SKU
LUMINAIRE QTY PER 16A
TYPE C CIRCUIT BREAKER
LUMINAIRE QTY PER 25A
TYPE C CIRCUIT BREAKER
BWLH
-02584060 150 275
BWLH
-05084060 80 147
BWLH
-10084060 42 77
BWLH
-15084060 29 53
BWLH
-20084060 24 44
BWLH
-20184060 20 37
BWLH
-025840100 150 275
BWLH
-050840100 80 147
BWLH
-100840100 42 77
BWLH
-150840100 29 53
BWLH
-200840100 24 44
BWLH
-201840100 20 37
BWLH
-025840120 130 238
BWLH
-050840120 80 147
BWLH
-100840120 40 73
BWLH
-150840120 27 50

4/4
FULMAR H 120
© 2018, All rights reserved BaltLED, UAB. Specifications are subject to change without notice.
MOTION AND LIGHT SENSOR
www.baltled.com
26th October, 2018
FULMAR INDUSTRIAL LUMINAIRES INSTALLATION GUIDE
With sufficient ambient lux level ,
light keeps off even when motion
is detected.
Light is on when sensor detects
the motion and the ambient lux
level is insufficient
When no more motion is detected,
the light dims entering standby
mode after hold time.
The lights turns off automatically
after standby mode.
SET-UP CONFIGURATIONS 1 2
I100 %
II 75 %
III 50 %
IV 10 %
345
I 5 s
II 30 s
III 1 min
IV 5 min
V 10 min
VI 20 min
VII 30 min
6 7
I Disable
II 50 lux
III 10 lux
IV 2 lux
11 12
I10 %
II 20 %
III 30 %
IV 50 %
8 9 10
I 0 s
II 10 s
III 1 min
IV 5 min
V 10 min
VI 30 min
VII 1 h
VIII + ∞
1. Detection area
This determines the effective range of
the motion detector.
2. Hold time
This is the minimum amount of time
that the luminaire will remain at 100%
light output after no motion is detected.
3. Daylight sensor
This setting determines when there is
insufficient daylight for natural lighting. In
disable mode luminaire will always turn on
upon movement.
4. Corridor function
This determines standby time that the
light remains dimmed before it is
completely turned off.
5. Standby dim level
Light can be dimmed to different levels
after hold time.
I –100 %
II –75 %
III –50 %
IV –10%
I –5 s
II –30 s
III –1 min
IV –5 min
V–10 min
VI –20 min
I –Disable
II –50 lux
III –10 lux
IV –2 lux
I –0 s
II –10 s
III –1 min
IV –5 min
V–10 min
VI –30 min
VII –1 h
VIII - + ∞
I –10 %
II –20 %
III –30 %
IV –50%