Bamo BAMOPHOX 436 E User manual

MESURES
22, Rue de la Voie des Bans - Z.I. de la Gare - 95100 ARGENTEUIL
Tél : [phone] - Web : www.bamo.fr
Fax : [phone] - E-mail : [email protected]
Turbidity monitor and controller
BAMOPHOX 436
MES
436-01/1
INSTRUCTION MANUAL
INSTRUCTION MANUAL
BB
BBAA AAMM MMOO OOPP PPHH HHOO OOXX XX 44 4433 3366 66 EE EE -- -- MM MM
Turbidity monitor and controller
05-06-2007 436 M1 01 C

Page 2
436 M1 01 C
Turbidity monitor and controller
BAMOPHOX 436 E & M
(Technical information and Manual for LOGGER /RS422 version are on a specific document)
Table of contents
1. TECHNICAL SPECIFICATIONS Page 3
2. CAUTION 3
3. DIMENSIONS 3
4. WIRING 4
5. FRONT PANEL 7
SCROLLING MENU 8
ABOUT BAMOPHOX 8
CONSULTING / MODIFYING 8
MEASUREMENT PARAMETERS 9
ADJUSTING THRESHOLD 1 10
ADJUSTING THRESHOLD 2 10
ADJUSTING THRESHOLD 3 11
ANALOG OUTPUT 4-20 mA FOR TURBIDITY 11
ANALOGUE OUTPUT 4-20 mA FOR TEMPERATURE 12
TESTING RELAY 12
LANGUAGE 12

Page 3
436 M1 01 C
1. TECHNICAL FEATURES
Displayed parameters: Measurement values of Turbidity - Configuration Menu - Temperature value
Display: Back lighted - 2 lines of 16 alphanumerical characters ; 9,2 mm high
Indication: LED alarms status
Configuration: 8 push buttons keyboard on front face - Keyword protected
Units: NTU, FAU, mg/L, g/L, FNU
Scale Set up from 0.001 to 9999, adjustable decimal point
Turbidity measurement: input 0/4-20 mA
Temperature: input for a 3 wires Pt 100 Ω /0°C
Relay outputs: 4 closing contacts (Silver alloy), voltage free
3 programmable independent thresholds - with adjustable hysteresis 0…100% - and
adjustable timer from 0 to 9999 sec
1 Output relay (S4) as a common alarm
Contact: Switching capacity 250 V / 3A AC, 30 V / 3A DC, minimum 100 mA / 5 V DC
Measurement output: 0/4-20 mA (maxi 600 Ω) proportional to measurement, galvanic insulated
Temperature output: 0/4-20 mA (max 600 Ω), scaling 0…100°C, galvanic insulated
Main power supply: 230 V AC / 50-60 Hz [other on request] - Consumption 10 VA
Models: Panel mounting, front IP65, 72 x 144 mm, connections on screw terminal IP40
Idem DIN Rail mounting, only for blind monitor, IP40
Wall mounting, IP65, cable glands, connections on screw terminal
OPTION (RS 422 + Logger)
Communication: RS422 output, J-BUS link, binary slave mode, 2400 to 9600 bauds
Data Logger: Cycle average measurement record, with a programmable period,
150000 records on MMC (multi media card) / External driver necessary for reading
CE label
Labelized CE in conformity with 73/23/CEE low power and electromagnetic compatibilty 89/336/CEE
2. CAUTION
- The instrument may not be subject to vibrations and should be protected against direct sun shining.
The ambient temperature should be between 0 and 50°C.
- Wiring have to be done by a specialist.
- Any error on electrical connection may cancel terms of warranty.
- Before to switch on your instrument, please check that the main power supply corresponds to the device requirement.
3. DIMENSIONS
Extension terminal:
identical to the panel
or wall mounting
PANEL
Wall mounting instrument
Panel mounting instrument

Page 4
436 M1 01 C
4. WIRING
WALL MOUNTING
OPTION:
LOGGER
&
RS 422
OPTION:
LOGGER
(access by
the upper cover)
&
RS 422
PANEL MOUNTING
Measurement input

Page 5
436 M1 01 C
+ mA ouput / measurement
- mA ouput / measurement
- mA ouput / temperature
+ mA ouput / temperature
+ 24 V
To switch the regulation on stand-by
- 24 V
- 24 V
+ 24 V
Power supply = 20 mA
Pt 100 Ω
Shield
Y
Z Connection to an extension terminal (blind BAMOPHOX)
B
A
S4 contact, NO, alarm on temperature or over range
S2 threshold, NO contact – Measurement / Temperature
S1 threshold NO contact – Measurement / Temperature
S3 threshold NO contact – Measurement / Temperature
NOT USED
Ground
N
Main power supply (N= Neutral, L= Line)
L
NC
- mA Turbidity transmitter
+ mA
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
Screwing terminals
P +
P -
+
4-20 mA
-
TURBICUBE
or
GAB
Wiring from wall or panel mounting BAMOPHOX to an Extension terminal BAMOPHOX
- Maximum length cable:
500 m
- Wire specifications:
Mains cable or 4 wires
shielded cable
≥ 0,25 mm2cross section
Main unit
YZBA
13 14 15 16
Extension terminal
YZBA
13 14 15 16

Page 6
436 M1 01 C
+ mA ouput / measurement
- mA ouput / measurement
- mA ouput / temperature
+ mA ouput / temperature
+ 24 V
To switch the regulation on stand-by
- 24 V
- 24 V
+ 24 V
Power supply = 20 mA
Pt 100 Ω
Shield
Y
Z Connection to an extension terminal (blind BAMOPHOX)
B
A
S4 contact, NO, alarm on temperature or over range
S2 threshold, NO contact – Measurement / Temperature
S1 threshold NO contact – Measurement / Temperature
S3 threshold NO contact – Measurement / Temperature
NOT USED
Ground
N
Main power supply (N= Neutral, L= Line)
L
NC
- mA Turbidity transmitter
+ mA
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
Screwing terminals
+ 24 V
0 V
Ouput
TURBISENS
4-20 mA

Page 7
436 M1 01 C
5. FRONT PANEL
“ENTER” key
To change the step displayed menu.
At the last step, it comes back to the
first line.
“MENU - ” key
To move the cursor during configuration.
At the last digit, comes back on the first one.
“MENU +” key
To go to the next menu.
Pushing simultaneously both keys
“MENU +” and “ENTER”
allows a fast return to measurement display.
“VALID” key
To save the parameters on EPROM
when it asks:
VALIDATION ?
Caution, when you press this key,
all parameters are saved.
(previous data programmation
will be overwrited).
If you are not sure of any modification,
do not press the VALID key,
To change parameters of data capture:
Numéric input increase the
flashing digit (loop 0 after 9).
Reverse the choice Yes / No,
Up/Down, 0-20 mA / 4-20 mA etc.
To go to the next display or to change a value.
S1, S2, S3, and S4
indicate relays status:
LED lighting = contact ON
LED OFF = contact OFF
LED flashing = Timer in use
2 lines /16 alphanumeric characters
9.22 mm high - Back lighted
Key “A”
To display the parameters of upper line.
(main BAMOPHOX)
Key “B”
To display the parameters of lower line.
(Extension blind BAMOPHOX)

Page 8
436 M1 01 C
SCROLLING MENU
Display the turbidity value
ABOUT BAMOPHOX To consult serial number, instrument type
CONSULTATION / MODIFICATION
SCALE PARAMETERS
ADUST ALARM 1
ADUST ALARM 2
ADUST ALARM 3
OUTPUT mA TURB
OUTPUT mA TEMP
FORCED DISPLAY
LANGUAGE
MENU
+
MENU
+
MENU
+
MENU
+
MENU
+
MENU
+
MENU
+
MENU
+
MENU
+
MENU
+
MENU
+
ABOUT Bamophox
ABOUT Bamophox
VERSION 2.04
SERIAL N°
20451 05
CONSULTATION / MODIFICATION
CONSULTATION
MODIFICATION
CODE ? 0000
CODE ? 5105 Last 4 digits (of serial number) are the key code to access
the MODIFICATION menu. When wrong code is entered,
the message “ERROR” appears during 3 seconds.
TIME : 30 mn (After 30 minutes, the display returns automatically to the
measurement mode.
ENTER
ENTER
ENTER
ENTER
L
ENTER
ENTER
ENTER
MENU
+
L
L

Page 9
436 M1 01 C
SCALE PARAMETERS ADJUST ALARM 1 page 10
UNIT Choose between NTU FAU, mg/l, g/l, FNU
x-x,xxx NTU Decimal point selection
SCALE
MINI : 00,00 NTU Minimal range value
MAXI : 00,00 NTU Maximal range value
TRANSMITTER
MINI : 04,00 mA Minimal calculated value to display
MAXI : 20,00 mA Maximal calculated value to display.
SAVING ?
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
VALID
MENU
+
L L
L
L
L
L
LL
L
L

436 M1 01 C Page 10
ADJUST ALARM 1 ADJUST ALARM 2
ALARM 1 ON/OFF
ALARM 1 MEASURE/TEMP MEASURE= Threshold against pH/mV measured value
TEMP.= Threshold against temperature measured value
ALARM 1 LOW/HIGH HIGH= Contact closes when value goes over the limit
LOW= Contact closes when the value goes under the limit
ON 0000 NTU / °C To close the contact S1 at this value
OFF 0000 NTU / °C To open the contact S1 at this value
DELAY UP ONI/OFF Delay (or no delay) before to close the contact S1
TIME 0000 SEC Delay time to close the contact S1
DELAYDOWN ON/OFF Delay (or no delay) before to open the contact S1
TIME 0000 SEC Delay time to open the contact S1
SAVING ?
ADJUST ALARM 2 ADJUST ALARM 3 page 11
ALARM 2 ON/OFF
ALARM 2 MEASURE/TEMP MEASURE= Threshold against pH/mV measured value
TEMP.= Threshold against temperature measured value
ALARM 2 LOW/HIGH HIGH= Contact closes when value goes over the limit
LOW= Contact closes when the value goes under the limit
ON 0000 NTU / °C To close the contact S2 at this value
OFF 0000 NTU / °C To open the contact S2 at this value
DELAY UP ONI/OFF Delay (or no delay) before to close the contact S2
TIME 0000 SEC Delay time to close the contact S2
DELAYDOWN ON/OFF Delay (or no delay) before to open the contact S2
TIME 0000 SEC Delay time to open the contact S2
SAVING ?
L
L
L
L L L L
L
L
L
L
L
L
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
VALID
MENU
+
L
L
L
L L L L
L
L
L
L
L
L
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
VALID
MENU
+

ADJUST ALARM 3 OUTPUT mA TURB
ALARM 3 ON/OFF
ALARM 3 MEASURE/TEMP MEASURE= Threshold against pH/mV measured value
TEMP.= Threshold against temperature measured value
ALARM 3 LOW/HIGH HIGH= Contact closes when value goes over the limit
LOW= Contact closes when the value goes under the limit
ON 0000 NTU / °C To close the contact S3 at this value
OFF 0000 NTU / °C To open the contact S3 at this value
DELAY UP ONI/OFF Delay (or no delay) before to close the contact S3
TIME 0000 SEC Delay time to close the contact S3
DELAYDOWN ON/OFF Delay (or no delay) before to open the contact S3
TIME 0000 SEC Delay time to open the contact S3
SAVING ?
OUTPUT mA TURBIDITE OUTPUT mA TEMP page 12
HIGHER 0000 NTU Value corresponding to 20,00 mA
LOWER 0000 NTU Value corresponding to 00,00 mA or 04,00 mA
OUTPUT 4/20 mA / 0/20 mA Output type
SAVING ?
L
LL
L
L
ENTER
ENTER
ENTER
ENTER
VALID
MENU
+
L
L
L
L L L L
L
L
L
L
L
L
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
VALID
MENU
+
Page 11
436 M1 01 C

Page 12
436 M1 01 C
OUTPUT mA TEMP. MARCHE FORCEE
Caution: If PID regulation is active, this step menu would not appears
HIGHER 0000 NTU Value corresponding to 20,00 mA
LOWER 0000 NTU Value corresponding to 00,00 mA or 04,00 mA
OUTPUT 4/20 mA / 0/20 mA Output type
SAVING ?
L
LL
L
L
ENTER
ENTER
ENTER
ENTER
VALID
MENU
+
FORCED RELAY LANGUAGE
ALARM 1 ON / OFF
ALARM 2 ON / OFF
Diagnostic mode to test the threshold configurations
ALARM 3 ON / OFF
ALARM 4 ON / OFF
L
L
L
L
ENTER
ENTER
ENTER
ENTER
VALID
MENU
+
LANGUAGE Back to measurement mode
ENGLISH / GERMAN / FRENCH
SAVING ?
L
ENTER
ENTER
VALID
MENU
+