B&B Electronics ILinx 232OPDRI User manual

Documentation Number –p/n 8457R002 232OPDRI-0812qsg
©2010 B&B Electronics Manufacturing Company
2
2. . I In nf fo or rm ma at ti io on n – – U UL L C Cl la as ss s 1 1 D Di iv v 2 2
1. Power, input /output (I/O) wiring must be in
accordance with Class 1 Division 2 wiring methods
[Article 501.10(B) of the National Electric code,
NFPA70] and in accordance with the local authority
having jurisdiction.
2. Maximum ambient are temperature 80°C.
3. WARNING –EXPLOSION HAZARD:
SUBSTITUTION OF COMPONENTS MAY IMPAIR
SUITABLITY FOR CLASS 1, DIVISION 2.
4. WARNING –EXPLOSION HAZARD: WHEN IN
HAZARDOUS LOCATIONS, TURNING OFF
POWER BEFORE REPLACING OR WIRING
MODULES
5. WARNING –EXPLOSION HAZARD: DO NOT
DISCONNECT EQUIPMENT UNLESS POWER HAS
BEEN SWITCHED OFF OR THE AREA IS KNOWN
TO BE NON-HAZARDOUS.
6.WARNING –THIS APPARATUS IS SUITABLE FOR
USE IN CLASS 1 DIVISION 2, GROUPS A, B, C,
AND D, OR UNCLASSIFIED AREAS.
1
1. . C Ch he ec ck k f fo or r R Re eq qu ui ir re ed d H Ha ar rd dw wa ar re e
ILinx 232OPDRI RS-232 Isolated Repeater
This Quick Start Guide
Additional Items Required but not included
oA 10 to 48 VDC Power Supply.
oTwo RS-232 cables.
Put
Quick Start Guide
ILinx 232OPDRI
Triple Isolated RS-232
Repeater
4
4. . R RS S- -2 23 32 2 C Co on nn ne ec ct ti io on ns s
3
3. . I In nf fo or rm ma at ti io on n – – F Fr ro on nt t P Pa an ne el l
Front Panel
A
Power TB
2 Position, Removable
B
Pin 2 LED
Red, Flashes when RD present on
DTE Port
C
DB9 Female
DCE Port
D
DB9 Male
DTE Port
E
Pin 3 LED
Red, Flashes when TD present on
DCE Port
F
Power LED
Red, ON When Power Applied
G
Pin 7 LED
Red, Flashes when RTS raised on
DCE Port
H
Pin 8 LED
Red, Flashes when CTS raised on
DTE Port

Documentation Number –p/n 8457R002 232OPDRI-0812qsg
©2010 B&B Electronics Manufacturing Company
5
5. . P Po ow we er r C Co on nn ne ec ct ti io on n
Power Requirements: 10 to 48 VDC, 0.2A
6
6. . L Lo oo op p B Ba ac ck k T Te es st t / / T Tr ro ou ub bl le es sh ho oo ot ti in ng g
Use a DB9 Female to DB9 Male cable to connect a
PC to the DCE (Top) port.
(Recommended) Connect a DB9 Female to DB9
Female cable to the DTE (Bottom) port.
On the DTE Port, jumper pin 2 to 3 and pin 7 to 8.
Using hyper terminal or similar program, connect to
the appropriate COM port (remember to set the
baud rate to 9600).Turn off hyper terminal local
echo
Transmit data. The same data should be returned.
LED Indicators: Power is ON when power is applied.
TD flashes when RS-422/485 data is sent. RD
flashes when RS-422/485 Data is received.