B&G H5000 Pilot User manual

Race Display
Quick Reference Guide
MENU
1
2
3
2
4
Keys
1Page key: Exit from menu system and return to last active page. Repeating presses: scroll
through the 5 data pages in rotation. Press and hold: save the current page configuration.
2Arrow keys: Switch between upper/lower half of the display when changing variables.
Scroll through options. Increase/decrease values.
3Enter key: Enter the selected menu option. Confirm change/selection.
4MENU / Lights key: Enter the menu system. Repeating presses: scroll through the menu
options. Press and hold: enter the lights settings.
Display elements / symbols
11
3
1
7
6
9
10
8
12
13
31
4
2
5
2
No. Description No. Description
1Data variable / menu name 8Alarm - Warning
2Data value 9Alarm - Info
3Unit of measure 10 Controlling remote (HV) display
4Bargraph data type 11 Autopilot engaged
5Bargraph data 12 Active page number
6The icon flashes when the Page key is
held to store a page configuration 13 B&G CPU on the network
7Alarm - Critical
Backlighting
MENU
Press
and
hold
Race timer
Once the countdown timer reaches zero it will start counting up showing the elapsed time from
zero. The timer will continue to count until it is stopped.
SET the value of the timer
MENU
Once SET is selected, use the directional keys to set the required time (whole minutes only).
START the timer
If a time value is preset, the timer will countdown. If the timer is on zero it will count up.
MENU
Synchronize the timer
Synchronizing the timer will cause the timer to reset to the nearest whole minute.
STOP the timer.
¼Note: Press Enter again to restart the timer.
EN
www.bandg.com 988-10636-001 - 1/5
x3

Page navigation
Menu system
MENU
Press the MENU key to access the menu options i.e. the first menu option is TIMER, then
REMOTE etc. - selecting the options clockwise as per the above illustration.
Press Page to exit from menu system and return to last active page.
Conguring a page
Save current page
configuration: Press
and hold till the
update icon stops
flashing
Conguring remote displays
MENU
Use the up/down and Enter keys to navigate to a variable and select the variable to display.
Exit with Page key.
Enabling alarm messages
MENU
Alarm notication - depth alarm example
Acknowledging an alarm
x2
When an alarm event is received the
display will change to show the variable
name that is alarming and the current
value. An icon will be highlighted to
indicate the severity of the alarm.
x2
This will remove the alarm notification
(text, light and sound) from all units on
the network. A reminder will reappear at
given intervals for as long as the alarm
condition exists.
x8