B&G H5000 Pilot User manual

Graphic Display
Quick Reference Guide
MENU
1
2
3
2
4
Keys
1
Page key: Each short press of the Page key scrolls through the data pages in rotation.
From any data page, a long press of the Page key will bring up the pages menu, from
where you can select a page directly from a list.
From any dialog, the Page key navigates back to the last active page.
From any menu, the Page key navigates back one step.
2Arrow keys: Scroll up/down through selected menus/set values.
3Enter key: Enter the selected sub menus and confirm selection.
4
MENU / Lights key: Single press: enter the Page menu.
Double press: enter the Settings menu.
From any data page: Press and hold for 3 seconds enters the Display Setup.
Menu options
Page menu
The Page menu vary from page to page.
All page options include a Race Timer and
Settings, which will access the Settings
menu. All other options listed will relate to the
current data page.
Settings menu
From the Settings menu you can access
display options, display and system settings,
calibration etc.
MENU
MENU
x2
EN
www.bandg.com 988-10637-002 - EN - 1/5

Menu structure
Use the Up, Down and Enter keys to navigate through the menu options. Use the
Page key to go back one step.
Example of how to access the Time dialog from the Settings menu
Select
preferred
Time
and Date
format, and
press Save.
Standby
All of the displays can be placed in Standby
mode from the Display Setup dialog. A single
press of the MENU key will turn the displays back
on.
Conguring a remote (HV) display
From the Settings menu, select Remote Displays.
Select the remote display that you wish to configure.
Select the information source you wish to show on the selected HV display.
Once selected, the screen will revert to the Settings menu.
MENU
3 sec
988-10637-002 - EN - 1/5

Page navigation
Sail Steer
2x1 Grid
Wind Plot
Start Line
Depth History
Highway
Tide
Pilot Status
Enabling/Disabling a data page
To make a data page available via the page key, it has to be selected as one of the eight
available pages:
1 Press the MENU key twice to enter the Settings menu
2 Highlight the Pages option, then press Enter twice
3 Highlight the required page, then press MENU
4 Press Enter to switch the page on or off
5 Press Page to step back in the system, one step at a time.
To learn about configuring pages, replacing pages etc., refer to the H5000 Operator manual.
988-10637-002 - EN - 1/5

Lighting
Control the light level, set night mode and night mode color. Adjusting the backlight
settings will affect all other displays in the same display group.
Race timer
Once the countdown timer reaches zero it will start counting up, showing the elapsed
time from zero. The timer will continue to count until it is stopped.
Set start value
Press OK
to save.
Use the arrow keys to select a number in the start value. Press Enter to move to each
consecutive number field. When complete, confirm the value with OK.
Start/Synchronize/Stop timer
¼Note: When the timer is counting down, selecting Sync will synchronize the time
up or down to the nearest full minute.
Reset timer
Selecting Reset will reset the timer to the start value.
If the timer was running, it will continue to run from the
start value.
Auto start trip
Selecting Auto start trip will enable the Trip Log to
record your time and mileage from the moment the
countdown timer begins counting up from zero.
MENU
3 sec
x2
988-10637-002 - EN - 1/5