B&G ZEUS S User manual

Scan here
to save a copy
ZEUS®S
QUICK START GUIDE
*988-13103-001*
B&G Zeus®S multi-function display is available in three
sizes. This document describes the basic controls of the
Zeus®S.
For more operational information, refer to the included Basic
Operation Guide.
For the latest version of this document and other app guides,
we recommend you download the B&G mobile app, scan the
QR code®above, and connect with your Zeus®S, or visit:
www.bandg.com/downloads/zeus-s.
¼Note: Refer to the enclosed installation manual before
you turn on the unit.
BASIC CONTROLS
To turn the unit on, press and hold the power button. A beep
indicates the unit is powering up.
To turn the unit off, press and hold the power button, or
select Power off from the quick access menu.
A B
A Power button
B Touchscreen
External power control
Power to the unit can be controlled by an external switch or
other units. For details about available power options, refer to
the unit’s installation manual.
¼Note: If your MFD is controlled by an external power
source, it can’t be powered off using the power button.
Pressing and holding the power button puts the unit in
standby mode. To wake the unit, press the power button
again.
FIRST STARTUP
When you start the unit for the rst time, or when you start it
after a factory reset, you need to complete the initial setup
for language, country, timezone, scan for an existing boat
network, and follow the on screen prompts.
SETUP GUIDE
On the Welcome screen, select Continue device setup to
complete the device settings. Alternatively, select the settings
icon then select Setup guide to set up the unit.
¼Note: It is important to set up the MFD for accurate
navigation and safety at sea.
QUICK ACCESS MENU
The quick access menu gives you immediate access to basic
system settings and features. Press the power button once to
display the quick access menu or swipe down from the top of
the screen.
The image below illustrates the screen from a unit connected
to an external power control.
¼Note: To hide the quick access menu, swipe up or tap
anywhere on the screen.

TRADEMARKS
• B&G®is a trademark of Navico Holding AS.
• Zeus®is a trademark of Navico Holding AS.
• QR Code®is a trademark of Denso Wave Incorporated.
• App Store®and App Store Logos are trademarks of Apple Inc.
• Google Play®and Google Play logos are trademarks of Google Llc.
Copyright ©2023 Navico Holding AS.
®Reg. U.S. Pat. & Tm. Off, and ™ common law marks.
Visit www.navico.com/intellectual-property to review the global trademark rights and accreditations
for Navico Holding AS and other entities.
HOME SCREEN
To open your home screen, select the home button on the
recent apps panel. All apps, settings, and alert messages can
be accessed from the home screen.
B
A
C
E
D
F
A Home button — select to view the home screen
B Alerts list — select to view recent and historic system
alerts
C Settings — select to view MFD settings
D Status bar — displays the current day and time
E Apps — displays a grid layout of all system and custom
app groups
F Exit — select to exit the home screen and return to the
last used app
¼Note: The exit button (F) is disabled if there are no active
apps.
APPS
An app is a program for a unique feature or function. The
availability of some apps depends on the size of your unit
and the hardware that is connected.
For app-specic user guides, download the B&G app on your
mobile device and connect it to your display unit, or visit:
www.bandg.com/downloads/zeus-s.
ALERTS
The unit continuously monitors connected sensors and
devices for alerts, system faults, and environmental changes.
Alerts can be congured by setting up rules.
EMERGENCY AND MOB
Use the Man Overboard (MOB) app for emergency situations.
To open the app, select MOB on the home screen.
Select Overboard marker to create a MOB waypoint at your
vessel’s location and follow the instructions to respond to the
emergency.
1
2
3
¼Note: Use the Waypoints & Routes app to remove your
MOB waypoint.
CONNECT TO MOBILE APP
Select Connect to B&G app from the quick access menu to
connect your mobile device (phone or tablet) to the unit.
Download the B&G: Sailing & Navigation app from the App
Store®or Google Play®, then scan the QR®code.
Once connected, you can use the mobile app to:
• View and download app guides
• Register your display unit
• Create your own waypoints, routes and tracks
• Download and apply unit software updates
¼Note: An active internet connection is required for this
feature.