
www.bgequip.com 4
PRIMELINE SPRAYER
User Manual
Number
Legacy
Part # Description
Order
Number (US)
Order
Number (EU)
PF-273 Plunger rod (2 gal / 8 L &
1.3 gal / 5 L)
22029650 1208001159
PT-273 Plunger rod (3 gal / 12 L) 22029600 1208001158
16 P-269-SS Plunger nut 22028250 1608003635
17 P-272 Back plate 22029200 1608003639
18 NP-277 Cup, polypropylene 22029000 1208001155
NP-271 Cup, leather 22028800 1608003637
19 NP-270 Cup plate 22028600 1208001154
20 P-269A Lock washer 22028400 1608003636
21 P-268 Pump gasket 22028000 1608003634
22 PH-267 Pump tube (0.5 gal / 2 L) 22027400 1208001146
PO-267 Pump tube (1 gal / 4 L) 22027500 1208001147
PF-267 Pump tube (2 gal / 8 L &
1.3 gal / 5 L)
22027650 1208001149
PT-267 Pump tube (3 gal / 12 L) 22027600 1208001148
23 PV-266 Check valve 22027200 1608003632
TROUBLESHOOTING
Problem Solution
Tank is not holding pressure. • Tighten tank cap.
• Replace pump gasket.
Tank is not getting air pressure. • Replace cup spreader plate.
• Replace or add oil to leather plunger cap.
Pump cylinder is lling with water
when pumping.
• Clean around the check valve at the
bottom of pump cylinder.
• Replace the check valve.
Holds pressure but will not spray.
• Nozzle clogged, clean with a soft brush.
• Cracked siphon tube, replace.
• Siphon tube clogged, clean end.
• Clean strainer at the base of the valve, at
the hose / valve junction
Hose leaks at tank tting. • Replace hose washer.
Valve body leaking • Refer to valve’s troubleshooting.
Tip Leaking • Refer to valve’s troubleshooting.
DISPOSAL
Please follow all local regulations when disposing of equipment.
WARRANTY
Pelsis products are designed and manufactured to the highest standards
and deliver high-quality performance, ease of use and ease of installation. If
you encounter any diculties while using your product, we recommend that
you rst consult the user manual or the information in the support section
of our website. In the unlikely event of a fault, please contact your retailer or
distributor for further warranty information.
Any warranty claims must be supported by proof of purchase within the
warranty period (product dependent), the following exclusions apply:
• Normal wear & tear
• Damage caused by abuse, misuse, alterations or by not completing the
recommended maintenance.
This warranty does not affect your statutory rights.
CONTACT
Contact your local distributor or Pelsis country-specic location for
information on spares and service.
US: B&G Equipment, 135 Region South, Jackson, GA, 30233, USA
Contact Number: 1-800-544-8811
UK: Pelsis Ltd, Sterling House, Grimbald Crag Close, Knaresborough, HG5 8PJ, UK.
Contact Number: +44 (0) 800 988 5359
Europe: Pelsis Belgium NV, Industrieweg 15, 2880, Bornem, Belgium.
Contact Number: +32 (0) 3 886 22 11
All Other Countries: B&G Equipment, 135 Region South, Jackson, GA, 30233, USA
Contact Number: 1-678-688-5601
v3_1122