B&G ACCUSPRAY ELITE User manual
bgequip.com 1
ACCUSPRAY
ELITE
USER MANUAL
DESCRIPTION
The AccuSpray Elite is a hand-held, manually pumped stainless steel
sprayer designed for the application of small quantities (16 oz or 437 ml)
of water-based or oil-based formulations. The sprayer is sold with the
Extenda-Ban valve, though additional valve options may be available.
Please refer to the appropriate User Guide Addendum for additional details
on your sprayer’s features.
SAFETY
Please ensure you have read and fully understood the safety precautions
before operating this appliance. Instructions for use of this product will vary
depending on the formulation and application of the product. Always read the
formulation label when preparing your solution.
• Always comply with any requirements for Personal Protective Equipment
(PPE) as required by the formulation label.
• This appliance is to be kept out of reach from children. However, it can
be used by children aged 8 years and above, as well as persons with
reduced physical, sensory or mental capacities or lack of experience
and knowledge, provided they have been given supervision or instruction
concerning use of the appliance in a safe way, and understand the
hazards involved.
• Children should not play with, clean, or maintain the appliance.
• This sprayer can be used with water-based, oil-based, and
solvent-based formulations.
• Do not pressurize tank with external air or gas source; do not
over-pressurize.
• Do not adjust the tip or change spray patterns while depressing the
valve trigger.
• Do not store or transport the unit whilst the tank is pressurized.
• Refer to rating plate where present on the tank of some models.
Relevant Sprayer Model Numbers
Valve US EU Sprayer QR Code
Extenda-Ban 24000100
24000101
24000102
1108004858
1108004859
1108004860
Accuspray Elite,
4 Way Tip
Accuspray,
Termite Tip
Accuspray Elite,
Professional
Crack & Crevice
Tip
www.bgequip.com 2
ACCUSPRAY ELITE
User Manual
BEFORE USE
INSPECT
• Always inspect the hose, tank gasket, discharge valves, and nozzle for signs
of wear or damage. These parts must be in full working condition prior to
tank pressurization.
FILL
• Mix all formulations according to label directions.
• AccuSpray Elite comes with a measuring cup for mixing the correct amount
of formulation in the bottle. The cup is marked in milliliters.
• Pour the liquid formulation from the original container into the
measuring cup.
• Rinse cup into the AccuSpray Elite bottle.
• When mixing water-based formulations in the tank, rst add
approximately half of the water, then the chemical, followed by the
remain of the water required (unless specied otherwise on the label).
• Replace the pump and tank cap assembly, be sure the tank gasket ts
properly; tighten the cap until snug (do not over tighten).
CHOOSE TIP
The AccuSpray Elite has many nozzle options, depending upon the type of
valve selected. Refer to the User Guide Addendum for your valve to learn more
about changing and choosing tips.
PRESSURIZE
• Pump plunger 8-10 times until desired pressure for application is achieved.
• Do not pressurize over 50 PSI (3.45 Bar).
OPERATION
1. Aim the nozzle at the area to be treated.
2. Squeeze the valve grip, liquid will exit in the pattern associated with the tip
selected earlier.
3. The ow rates of water at 20 psi / 1.38 bar are provided for the various tips
in the User Manual Addendum, the most common are listed here. Always
calibrate for the formulation you are using.
CARE, MAINTENANCE,
AND REPLACEMENT PARTS
• Always empty and ush tank, valve, and extension with clean water after
each use; never leave chemicals in machine for extended periods of time.
• Do not use bleach or ammonia-based cleaners, these will damage the
stainless steel and brass parts.
• Do not store in freezing temperatures.
• After rinsing the tank with water, pressurize the tank and ush the valve
and hose.
• Inspect hoses and hose connections, gaskets, washers and other ttings
for wear; replace when necessary. Use the AccuSpray Elite repair kit
(#24000037/1608003935).
• Clean the lter at the hose/valve connection regularly.
• Do not use metal objects to clean the orices in the nozzle, this will disrupt
the liquid spray pattern.
• All parts are available for purchase from your distributor or B&G Equipment.
Tip Flow Rate
oz/min ml/min
50° Coarse Fan 14.1 417.0
80° Fine Fan 6.4 189.3
Large Pin Stream 8.9 263.2
Small Pin Stream 4.5 133.16
Crack & Crevice Straw (red) 6 177.4
Crack & Crevice Straw (white) 3.8 112.4
www.bgequip.com 3
ACCUSPRAY ELITE
User Manual
TROUBLESHOOTING
2
4
1
3
Number Description
Order
Number (US)
Order
Number (EU)
1Hose S/A (color may vary) 24000078 1208001294
2 Brass pump assembly (Includes siphon
tube and push handle)
24000093 1108004856
3 Stainless steel bottle (with cap) 24000125 1108004870
4 Holster 24000072 1608003942
Siphon Tube 24000089 1108004855
Pump Handle 24000114 1108004867
Cap 24000116 1108004869
Measuring Cup 95124247 1608004234
AccuSpray repair kit 24000037 1608003935
Problem Solution
Tank is not holding pressure. • Tighten tank cap.
• Replace pump gasket.
Tank is not getting air pressure. • Replace pump tube gasket.
Pump cylinder is lling with water
when pumping.
• Clean around the check valve at the
bottom of pump cylinder.
• Replace the check valve.
Holds pressure but will not spray.
• Nozzle clogged, clean with a soft brush.
• Cracked siphon tube, replace.
• Siphon tube clogged, clean end.
• Clean strainer at the base of the valve, at
the hose / valve junction.
Valve body leaking. • Refer to valve troubleshooting.
Tip Leaking. • Refer to valve troubleshooting.
DISPOSAL
Please follow all local regulations when disposing of equipment.
WARRANTY
Pelsis products are designed and manufactured to the highest standards
and deliver high-quality performance, ease of use and ease of installation. If
you encounter any diculties while using your product, we recommend that
you rst consult the user manual or the information in the support section
of our website. In the unlikely event of a fault, please contact your retailer or
distributor for further warranty information.
Any warranty claims must be supported by proof of purchase within the
warranty period (product dependent), the following exclusions apply:
• Normal wear & tear.
• Damage caused by abuse, misuse, alterations or by not completing the
recommended maintenance.
This warranty does not affect your statutory rights.
CONTACT
Contact your local distributor or Pelsis country-specic location for
information on spares and service.
US: B&G Equipment, 135 Region South, Jackson, GA, 30233, USA
Contact Number: 1-800-544-8811
UK: Pelsis Ltd, Sterling House, Grimbald Crag Close, Knaresborough, HG5 8PJ, UK.
Contact Number: +44 (0) 800 988 5359
Europe: Pelsis Belgium NV, Industrieweg 15, 2880, Bornem, Belgium.
Contact Number: +32 (0) 3 886 22 11
All Other Countries: B&G Equipment, 135 Region South, Jackson, GA, 30233, USA
Contact Number: 1-678-688-5601
SPRAYER PARTS (SEE ADDENDUM FOR VALVE PARTS)
V3_0223
Other B&G Paint Sprayer manuals
