b&t hann User manual

assembly instructions
www.bt.designwww.bt.design
CHROME / STATIC / STAINLESS SURFACE USE AND CLEANING
INFORMATION
Chrome surfaces are indoor products.
Avoid contact of chrome, static, and stainless steel products with hard objects.
Always use a cleaning cloth that will not corrode the surface while cleaning
chrome and stainless steel surfaces.
Do not use sponges that can corrode surfaces like a scouring pad, brush, etc.
Clean the surface periodically (once every 10 days) using a chrome polisher.
For static paint surfaces, use a clean moist cloth, wipe and dry.
Do not use chemicals with hydrochloric content like ammonia, alcohol, bleach,
etc. in the cleaning of chrome, static, and stainless steel surfaces.
WOOD USE AND CLEANING INFORMATION
1. Tray varieties are laminated, lacquered, polished, natural finish, and glass.
2. Keep wood products away from humid environments.
3. Do not use chemicals containing harmful substances like alcohol while cleaning the surfaces.
4. Avoid direct contact of tough, abrasive, hot, flammable materials with the surface.
6. Do not leave lacquered, laminated, etc. products in wet and humid environments.
According to the results of laboratory examinations to be performed on defective products, if the problem
is due to manufacturing, product is repaired and the damage is amended. Manufacturing company is not
responsible for errors and deteriorations caused by usage outside the recommendations.
/btdesignglobal
1
2
4
3
hann
meeting table

4
3
• For each leg, 4 pieces of M10x25mm-countersunk bolts must be used.
• The table top is turned upside down and placed on a at surface.
The table top and the frame are centered.
1
2
• The 50x50 metal proles are placed side by side so that the connecting lugs are distal.
• The feet are xed to the 50x50 metal proles with the M10x25mm-countersunk bolts.

5
6
7
8
• The frame is mounted to the table top with 4x18mm-countersunk bolts.