Barco MDSC-2224 User manual

MDSC-2224
User Guide
(451920611391)K5903031/00
21/01/2014

Barco nv
President Kennedypark 35, 8500 Kortrijk, Belgium
Phone: [phone]
Fax: [phone]
Support: www.barco.com/esupport
Visit us at the web: www.barco.com
PrintedinBelgium

Table of contents
TABLE OF CONTENTS
1. Welcome! .......................................................................................... 3
1.1 About the product ............................................................................................. 3
1.2 What’s in the box.............................................................................................. 3
1.3 About this user guide ......................................................................................... 4
2. Parts, controls and connectors ............................................................... 5
2.1 Front view...................................................................................................... 5
2.2 Rear view ...................................................................................................... 6
2.3 Connector view................................................................................................ 6
2.3.1 MDSC-2224 LED version............................................................................... 6
2.3.2 MDSC-2224 MNA version.............................................................................. 7
2.4 Connector pin assignments.................................................................................. 8
2.4.1 Input power connector .................................................................................. 8
2.4.2 DVI–1 connector......................................................................................... 8
2.4.3 DVI out connector ....................................................................................... 9
2.4.4 RS232 connector........................................................................................10
2.4.5 USB connector...........................................................................................10
2.4.6 Mini USB connector.....................................................................................11
2.4.7 DisplayPort connector ..................................................................................11
2.4.8 S-Video and S-Video-out connector...................................................................12
3. Display installation .............................................................................. 13
3.1 VESA mount installation......................................................................................13
3.2 Cover removal.................................................................................................14
3.3 Video input connection .......................................................................................14
3.3.1 MDSC-2224 LED version...............................................................................14
3.3.2 MDSC-2224 MNA version..............................................................................15
3.4 Video output connection......................................................................................16
3.4.1 MDSC-2224 LED version...............................................................................16
3.4.2 MDSC-2224 MNA version..............................................................................16
3.5 Nexxis OR .....................................................................................................17
3.6 Power supply connection.....................................................................................17
3.7 Cable routing ..................................................................................................18
4. Daily operation ................................................................................... 21
4.1 Keyboard activation/deactivation............................................................................21
4.2 Keyboard backlight ...........................................................................................22
4.3 On/Off switching...............................................................................................22
4.4 Power led status ..............................................................................................23
4.5 OSD menu activation.........................................................................................23
4.6 OSD menu navigation ........................................................................................23
4.7 Shortkey functions ............................................................................................24
4.7.1 Main source selection...................................................................................25
4.7.2 Multi-image configuration...............................................................................25
4.7.3 Zoom factor selection ...................................................................................26
4.7.4 Brightness adjustment ..................................................................................26
4.8 Extended keyboard functions................................................................................26
4.8.1 Main source selection...................................................................................27
4.8.2 Second source selection................................................................................28
4.8.3 Multi-image configuration...............................................................................28
4.8.4 Common Functions: Transfer function selection.....................................................29
4.8.5 Common Functions: Image size selection............................................................29
4.8.6 Common Functions: Zoom factor selection ..........................................................30
4.9 Menu locking/unlocking ......................................................................................30
5. Advanced operation ............................................................................. 31
5.1 OSD picture menu ............................................................................................31
5.1.1 Profile.....................................................................................................31
(451920611391)K5903031 MDSC-2224 21/01/2014 1

Table of contents
5.1.2 Brightness................................................................................................31
5.1.3 Contrast ..................................................................................................32
5.1.4 Saturation ................................................................................................32
5.1.5 Color temperature .......................................................................................32
5.1.6 Gamma...................................................................................................33
5.1.7 Sharpness................................................................................................33
5.2 Picture Advanced menu......................................................................................34
5.2.1 Black Level...............................................................................................34
5.2.2 Smart Video..............................................................................................34
5.2.3 Image Position...........................................................................................35
5.2.4 Auto Adjustment.........................................................................................35
5.2.5 Phase.....................................................................................................35
5.2.6 Clock/Line................................................................................................36
5.3 Display Format menu.........................................................................................36
5.3.1 Main Source (Primary Source).........................................................................36
5.3.2 Component Mode .......................................................................................37
5.3.3 Zoom......................................................................................................37
5.3.4 Image Size ...............................................................................................38
5.3.5 2nd Picture Mode ........................................................................................38
5.3.6 2nd Picture Source.......................................................................................39
5.3.7 2nd Picture Position......................................................................................39
5.3.8 Picture Swap.............................................................................................40
5.4 Configuration menu...........................................................................................40
5.4.1 Information ...............................................................................................40
5.4.2 Language.................................................................................................41
5.4.3 Failover mode............................................................................................41
5.4.4 Extended keyboard......................................................................................42
5.4.5 OSD setting..............................................................................................42
5.4.5.1 OSD Horizontal Position ..........................................................................42
5.4.5.2 OSD Vertical Position .............................................................................42
5.4.5.3 OSD Time-out......................................................................................43
5.4.6 Recall Profile.............................................................................................43
5.4.7 Save Profile..............................................................................................43
5.5 System menu..................................................................................................44
5.5.1 Power on DVI 1..........................................................................................44
5.5.2 Power on DVI 2..........................................................................................44
5.5.3 DVI Output ...............................................................................................45
5.5.4 Keyboard lock............................................................................................45
5.5.5 Keyboard backlight......................................................................................45
5.5.6 Power Saving............................................................................................46
6. Important information ........................................................................... 47
6.1 Safety information.............................................................................................47
6.2 Environmental information ...................................................................................49
6.3 Biological hazard and returns................................................................................51
6.4 Regulatory compliance information .........................................................................52
6.5 Cleaning and disinfection ....................................................................................53
6.6 Explanation of symbols.......................................................................................53
6.7 Legal disclaimer...............................................................................................54
6.8 Technical specifications ......................................................................................55
6.9 Open source license information............................................................................59
2(451920611391)K5903031 MDSC-2224 21/01/2014

1. Welcome!
1. WELCOME!
1.1 About the product
Overview
Barco’s MDSC-2224 is a 24-inch surgical display. Purpose-built for the operating room, the MDSC-2224
offers an easy-clean design, smart mechanics and the most detailed images in the operating room today.
Ease of mind
Perfect hand-eye coordination: The display’s high brightness, high contrast and full HD resolution provide
surgeons with excellent depth perception and the most accurate images. The MDSC-2224 presents im-
ages with unrivaled color and grayscale accuracy and with near-zero latency, making it perfectly suited
for use with today’s state-of-the-art endoscopy camera systems.
Multi-source, multi-display imaging: With its broad input connectivity, the MDSC-2224 also offers flexible
multi-modality imaging (PiP & PaP) in new integrated operating rooms. Thanks to its high-bright LED
backlight, the surgical display also ensures a long lifetime and low power consumption.
Ease of installation
The MDSC-2224 comes with a smart cable management system that hides the cables for a clutter-free
set-up. Its lightweight design allows easy mounting on surgical booms and spring arms. Available in
different models, this surgical display also features a host of connectivity options and remote control.
Ease of use
Barco’s MDSC-2224 allows easy cleaning and complete disinfection thanks to its smooth surface, sealed
housing, and protective screen cover. The fanless design avoids the spread of contaminants.
Features
• 24-inch wide-screen LCD with full HD resolution and 10–bit per color
• Wide viewing angle
• High-brightness LED backlight
• Advanced, full 10-bit image processing algorithms with 12–bit LUT
• Widest range of SD and HD input signals, including 3G-SDI and DisplayPort
• Light weight to easily mount onto a boom
Innovative features are also available to give maximum flexibility when installing the display as: Config-
urable DVI-out and Failover Mode
1.2 What’s in the box
Overview
Your MDSC-2224 display comes with:
• MDSC-2224 user guide
•DVIcable
• AC power cords
• external power supply
• 4 screws and Allen key
(451920611391)K5903031 MDSC-2224 21/01/2014 3

1. Welcome!
Keep your original packaging. It is designed for this display and is the ideal protection
during transport.
The user guide is available in other languages on www.barco.com.
1.3 About this user guide
Overview
This manual provides a support to the user during the installation, set up and utilization of the MDSC-2224
display. Depending on the specific version that has been purchased, some of the features and options
described in this document may not apply to the display in user’s hands.
4(451920611391)K5903031 MDSC-2224 21/01/2014

2. Parts, controls and connectors
2. PARTS, CONTROLS AND
CONNECTORS
2.1 Front view
Overview
1 2 3 4 5 6 7
Image 2-1
1Input Selection key
2Multi-image selection key / Down key
3Image zoom key / Up key
4OSD Menu key / Enter key
5Brightness decrease / Left key
6Brightness increase / Right key
7Stand-by key
A 7-key capacitive keypad is located on the front of the display. By default only the stand-by key is visible.
For keyboard activation please refer to "Keyboard activation/deactivation", page 21
(451920611391)K5903031 MDSC-2224 21/01/2014 5

2. Parts, controls and connectors
2.2 Rear view
Overview
4
1
5
1
1 1
3
2
5
Image 2-2
1VESA mount screw holes
2Cable routing channel
3Cable routing channel expansion clip
4Connector compartment cover
5Connector compartment cover fixation screws
2.3 Connector view
2.3.1 MDSC-2224 LED version
Overview
1 2 3 4 7 11 12 13 15
865 9 10 14
16
Image 2-3
1RS232
2Input power connector
3DVI out
4DVI-1 (digital & analog – HDMI video support with HDCP)
5SDI-1 out
6SDI-1
7DisplayPort (VESA std 1.1a)
8Sync
9CVBS
6(451920611391)K5903031 MDSC-2224 21/01/2014

2. Parts, controls and connectors
10 CVBS out
11 R/Pr
12 G/Y
13 B/Pb
14 S-Video out
15 S-Video
16 Service
2.3.2 MDSC-2224 MNA version
Overview
1 2 4 6 7 8 9 10 11 15 16 17 19
12513 14 18
20
3
Image 2-4
1Optical 10Gb Ethernet SFP+ interface*
2LED2*
Orange blinking: Activity = (Tx) or (Rx)
Off: No network activity
3LED1*
Green: Link is active
Off: No active network connection
4LED3*
Green: Power on, normal operation
Off: System not powered
Orange blinking: Error
5Micro USB interface*
6USB 2.0 type A interface*
7RS232
8Input power connector
9DVI out
10 DVI-1 (digital & analog – HDMI video support with HDCP)
11 DisplayPort (VESA std 1.1a)
12 Sync
13 CVBS
14 CVBS out
15 R/Pr
16 G/Y
17 B/Pb
18 S-Video out
19 S-Video
20 Service
(451920611391)K5903031 MDSC-2224 21/01/2014 7

2. Parts, controls and connectors
(*) Nexxis OR functionality: for more detailed information on Barco’s Nexxis integrated OR solution please
refer to the dedicated user guides. Please visit my.barco.com to obtain these user guides.
2.4 Connector pin assignments
2.4.1 Input power connector
Overview
Image 2-5
Pin Function
1GND
2 Not connected
3+24 VDC
4GND
5Shield
6+24 VDC
The ground and the shield connections on the power input connector have no Protec-
tive Earth function. A Protective Earth connection is provided via a dedicated pin (see
image 3-8).
2.4.2 DVI–1 connector
Overview
Image 2-6
Pin Function
1 D2_Rx- (T.M.D.S.)
2 D2_Rx+ (T.M.D.S.)
3 GND (data 2 shield)
4 Not connected
5Not connected
6 SCL (for DDC)
7SDA (for DDC)
8 Analog vertical sync
9D1_Rx- (T.M.D.S.)
10 D1_Rx+ (T.M.D.S.)
11 GND (data 1 shield)
8(451920611391)K5903031 MDSC-2224 21/01/2014

2. Parts, controls and connectors
12 Not connected
13 Not connected
14 +5V input (DDC supply) (*)
15 GND (cable sense)
16 Hotplugdetect(*)
17 D0_Rx- (T.M.D.S.)
18 D0_Rx+ (T.M.D.S.)
19 GND (data 0 shield)
20 Not connected
21 Not connected
22 GND (clock shield)
23 CK_Rx+ (T.M.D.S.)
24 CK_Rx- (T.M.D.S.)
C1 Analog Red
C2 Analog Green
C3 Analog Blue
C4 Analog horizontal sync
C5 Analog GND return (analog R, G, B)
(*) +5 VDC output selectable on either pin 14 or 16 via the OSD menu. (+5V ± 10% @ 500mA (max))
2.4.3 DVI out connector
Overview
Image 2-7
Pin Function
1D2_Rx- (T.M.D.S.)
2D2_Rx+ (T.M.D.S.)
3GND (data 2 shield)
4 Not connected
5Not connected
6SCL (for DDC)
7SDA (for DDC)
8 Not connected
9D1_Rx- (T.M.D.S.)
10 D1_Rx+ (T.M.D.S.)
11 GND (data 1 shield)
12 Not connected
13 Not connected
14 +5V output (*)
15 GND (cable sense)
16 Hot plug detect
17 D0_Rx- (T.M.D.S.)
(451920611391)K5903031 MDSC-2224 21/01/2014 9

2. Parts, controls and connectors
18 D0_Rx+ (T.M.D.S.)
19 GND (data 0 shield)
20 Not connected
21 Not connected
22 GND (clock shield)
23 CK_Rx+ (T.M.D.S.)
24 CK_Rx- (T.M.D.S.)
(*) +5 VDC output always available. (+5V ± 10% @ 500mA (max))
2.4.4 RS232 connector
Overview
Image 2-8
Pin Function
1 Not connected
2Rx (driven by host)
3Tx (driven by display)
4 Not connected
5Ground
6 Not connected
7Not connected
8 Not connected
9 Not connected
2.4.5 USB connector
Overview
Image 2-9
Pin Function
1+5 VDC
2Data—
3Data+
4GND
10 (451920611391)K5903031 MDSC-2224 21/01/2014

2. Parts, controls and connectors
2.4.6 Mini USB connector
Overview
12345
Image 2-10
Pin Function
1+5 VDC
2Data—
3Data+
X Not connected
4GND
2.4.7 DisplayPort connector
Overview
19 17 15 13 11 9 7 5 3 1
20 18 16 14 12 10 8 6 4 2
Image 2-11
Pin Function
1ML_Lane 0 (p)
2GND
3ML_Lane 0 (n)
4ML_Lane 1 (p)
5GND
6ML_Lane 1 (n)
7ML_Lane 2 (p)
8GND
9ML_Lane 2 (n)
10 ML_Lane 3 (p)
11 GND
12 ML_Lane 3 (n)
13 CONFIG1
14 CONFIG2
15 AUX CH (p)
16 GND
17 AUX CH (n)
18 Hot Plug
19 Return
20 DP_PWR (+3.3 VDC)
(451920611391)K5903031 MDSC-2224 21/01/2014 11

2. Parts, controls and connectors
2.4.8 S-Video and S-Video-out connector
Overview
Image 2-12
Pin Function
1Ground (Y)
2Ground (C)
3Luminance (Y)
4Chroma (C)
SG Shielded Ground
12 (451920611391)K5903031 MDSC-2224 21/01/2014

3. Display installation
3. DISPLAY INSTALLATION
3.1 VESA mount installation
Overview
The display supports mounting arm & stands according to the VESA 100 mm standard.
CAUTION:Use an arm that is approved by VESA.
CAUTION:Use an arm that can support a weight of least 10 kg (22,05 lbs).
The monitor VESA interface has been designed for a safety factor 6 (to support 6 times
the monitor weight). In the medical system, use an arm with suitable safety factor
(IEC60601–1).
To mount the display to an arm stand
1. Attach the arm stand firmly to the panel using the included 4 hexagonal screws (M4 x 25 mm) and the
dented washers. Use the included Allen key to fixthescrews.
Image 3-1
CAUTION:The4screwsincludedwiththisdisplay(M4x25mm)canbeusedforan
external VESA arm interface with a thickness of up to 5mm.
If, due to the thickness of the external VESA arm interface (=V), the length of the provided
screws (=L) is not suitable, consider the following rule:
Lmin =V+20mm
Lmax =V+30mm
(451920611391)K5903031 MDSC-2224 21/01/2014 13

3. Display installation
3.2 Cover removal
To remove the connector compartment cover
1. Loosen the screws fixing the connector compartment cover.
2. Slide the cover downwards to remove it from the display.
1
2 2
1
Image 3-2
3.3 Video input connection
About video input connections
The MDSC-2224 can have multiple different video inputs connected (depending on the display version).
Switching between the different inputs can be easily done by pressing the direct access key for this. See
the dedicated section for more info.
Futhermore, if more than one video source is connected, the Picture in Picture (PiP) and Side-by-Side
(SbS) functionality becomes available, allowing you to view two different video inputs at once. Please
refer to the dedicated chapter for more info on how to activate and use the PiP and SbS features on your
MDSC-2224.
This chapter describes how to connect the different video input types for each version of the MDSC-2224.
3.3.1 MDSC-2224 LED version
To connect the video inputs
1. Connect one or more of the available video source(s) to the corresponding video inputs using the ap-
propriate video cable(s).
4 5 6 7 8
1
2 3
9
Image 3-3
DVI or VGA (*) 4
DisplayPort 5
14 (451920611391)K5903031 MDSC-2224 21/01/2014

3. Display installation
SDI 1
R/G/B/S 6/7/8/2
R/G/B (SOG) 6/7/8
Y/Pb/Pr 7/8/6
CVBS 3
S-Video 9
(*) PC analog (VGA) input source can be connected to the DVI-I input connector using a DVI-I to VGA
adapter. The use of an adapter cable of at least 0.15 m long will allow an easy placement inside the cable
cover.
3.3.2 MDSC-2224 MNA version
To connect the video inputs
1. Connect one or more of the available video source(s) to the corresponding video inputs using the ap-
propriate video cable(s).
4 5 6 7 8
1 2
93
Image 3-4
Nexxis 3
DVI or VGA (*) 4
DisplayPort 5
R/G/B/S 6/7/8/1
Y/Pb/Pr 7/8/6
CVBS 2
S-Video 9
(*) PC analog (VGA) input source can be connected to the DVI-I input connector using a DVI-I to VGA
adapter. The use of an adapter cable of at least 0.15 m long will allow an easy placement inside the cable
cover.
(451920611391)K5903031 MDSC-2224 21/01/2014 15

3. Display installation
3.4 Video output connection
About video output connections
Beside the video input connections, the MDSC-2224 also has video output capabilities allowing you to
loop-through certain video inputs connected with the MDSC-2224 to another display, projector, video
recorder, ...
This chapter describes how to make use of the video output connections available for each version of the
MDSC-2224.
3.4.1 MDSC-2224 LED version
To connect the video outputs
1. Connect one or more of the available video sink(s) to the corresponding video outputs using the appro-
priate video cable(s).
4
1
2 3
Image 3-5
SDI 1
CVBS 2
S-Video 3
DVI 4(tobeconfiguredinOSDmenu)
3.4.2 MDSC-2224 MNA version
To connect the video outputs
1. Connect one or more of the available video sink(s) to the corresponding video outputs using the appro-
priate video cable(s).
16 (451920611391)K5903031 MDSC-2224 21/01/2014

3. Display installation
3
1 2
Image 3-6
CVBS 1
S-Video 2
DVI 3(tobeconfiguredinOSDmenu)
Nexxis 3(tobeconfiguredinOSDmenu)
3.5 Nexxis OR
Overview
Connecting your MDSC-2224 to Barco’s Nexxis OR system allows you to distribute video, graphics, audio
and computer data over the IP network, in raw uncompressed format, inside the operating room and even
between surgical suites.
To connect your MDSC-2224 to Barco’s Nexxis OR system, connect the 10Gb Ethernet interface to your
Nexxis switch. More info about Nexxis OR and howtoconfigure the MDSC-2224 in your network is avail-
able in the dedicated user guides. Please visit www.barco.com to obtain these user guides.
Nexxis OR is only available on the MDSC-2224 MNA version.
3.6 Power supply connection
To connect the power supply
1. Connect the supplied external DC power supply unit to the +24 VDC power input of your MDSC-2224
display.
2. Plug the other end of the external DC power supply into a grounded power outlet by means of the
proper power cord delivered in the packaging.
Note: The ground and the shield connections on the power input connector have no Protective Earth
function. A Protective Earth connection is provided via a dedicated pin (see image 3-8).
(451920611391)K5903031 MDSC-2224 21/01/2014 17

3. Display installation
Image 3-7
Protective earth pin
1. Earth the MDSC-2224 by connecting the protective earth pin to a grounded outlet by means of an
AWG18 (max. 6ft / 1,8m long) wire.
1
Image 3-8
3.7 Cable routing
To route the cables
1. For displays mounted to a VESA arm with internal cable routing provisions, route all cables through the
cable routing channel, then reinstall the connector compartment cover.
8a
Image 3-9
18 (451920611391)K5903031 MDSC-2224 21/01/2014