Barco DP2K-12C User manual

DP2K C-series
Compact DLP Cinema® projectors
Preliminary
Building on many years’ experience in digital cinema, Barco has developed a new
generation of modular cinema projectors: the DP2K series.
For small and mid-size movie theaters, Barco created a dedicated family of compact
DP2K C-series projectors, based on Texas Instruments’ proven 0.98” DLP Cinema® chip.
The C-series combine the renowned image quality and easy-to-use modular design of
a Barco projector in a budget-friendly, compact form factor.
Compact footprint, budget-friendly solutions
The Barco DP2K-12C is ideal for screens up to 12m, whereas the DP2K-15C is the
perfect companion for screens up to 15m. Flagship of the C-series is the DP2K-20C,
which creates an intense movie experience on screens up to 20m wide. All three
projectors are perfectly suited for high-quality 3D cinema.
*dependent on availability of DLP Cinema® enhanced 4K 0.98” DMD from Texas Instruments
Key benefits
• Based on Barco’s proven compact
platform featuring the 0.98” DLP
Cinema® chip
• Budget-friendly solution with minimal
cost of ownership thanks to low lamp
operating cost, re-usable filters, low
maintenance, etc.
• Maximum ease-of-use through
intuitive user interface
• Long-term image quality and
brightness thanks to Barco proprietary
sealed engine and advanced DMD
cooling
• Easy installation and maintenance
thanks to proven modular design and
common platform with DP2K B-series
• Next-generation electronics ready for
DLP Cinema® Enhanced 4K*

DP2K C-series specifications
www.barco.com/digitalcinema
Barco
Pres. Kennedypark 35, 8500 Kortrijk, Belgium
T [phone] - F [phone]
email: [e-mail]
11101 Trade Center Drive,
Rancho Cordova, CA 95670, USA
T [phone] - F [phone]
P.R. China
No. 16 Changsheng road,
Changping district, Beijing, 102200
T [phone] - F [phone]
R599256
M00274-R01-0310-DS
The information and data given are typical for the equipment described.
However any individual item is subject to change without any notice.
The latest version of this brochure can be found on www.barco.com.
DP2K-12C DP2K-15C DP2K-20C
Digital Micro Mirror devices 3 x 0.98”” DC2K dark metal devices
Native resolution 2,048 x 1,080 pixels
Housing hermetically sealed DMD’s and optical assembly
Lamp power 1.5kW - 2kW 1.5kW - 3kW 1.5kW - 4kW
Light output 9,500 lumens 14,500 lumens 18,000 lumens
Screen width (screen gain 1:8) @ 14ftl*
Screen width (screen gain 1:4) @ 14ftl*
Screen width (screen gain 1:2) @ 14ftl*
(*) = + 10% variation possible between units
up to 12m - 40ft
up to 15m - 50ft
up to 20m - 65ft
Contrast ratio 2,000:1
Digital video inputs 2 x SMPTE 292M inputs
2 x DVI input
both selectable as single and dual link
Prime lenses 1.2 - 1.8
1.4 - 2.05
1.6 - 2.5
1.95 - 3.2
2.4 - 3.9
Projector diagnostics via PC touch panel
via Communicator control software
via SNMP agent
Power requirements 220V
Dimensions (projector head) 558(H) x 694(W) x 1034(D) mm - 22.0(H) x 27.3(W) x 40.7(D) inch
NB.: min. 5 cm of air inlet spacing required at the bottom of projector
Weight 100 kg (220lbs)
102 kg (225lbs) 102 kg (225 lbs)
Max. ambient temperature 35°C / 95°F
Exhaust airflow 235 CFM
Standard features
CLO (Constant Light Output)
Powerful SNMP agent
Motorized/memorized lenses (focus, zoom & shift)
HDCP support
Full 2K triple flash 3D
Options
ACS-2048
Auto lamp alignment
3D add-ons
Touch panel
Pedestal
Order information R9005707
R9004448 R9004447