Barco PGWU-61B User manual

http://www.barco.com/en/products-solutions/projectors
For more information and Maintenance Guidelines,
check the Detailed User Manual on:
- Remove the lens before transporting the projector.
- To save lamp lifetime, first switch the projector to standby mode
and wait two minutes, then switch off the main power.
- Ensure that the projector is operating with clean filters.
- Do not block the ventilation in -and outlets.
- Using the projector at a non recommended tilt angle will reduce the lifetime of the lamps
or create unexpected behaviour of the unit.
- Laser light can cause severe damage to the DMD. This damage is not covered by warranty.
10 Important Info
R5905602-00 MAN QSG PG-series
see user manualADVANCED
service informationSERVICE
normal/eco/powerMODE
information on lamp statusINFO
select language
LANGUAGE
adjust keystoneKEYSTONE
adjust lens shiftLENS SHIFT
adjust lens zoomLENS ZOOM
adjust lens focusLENS FOCUS
modify image aspect ratioASPECT RATIO
adjust image colourCOLOR
adjust image contrastCONTRAST
adjust lamp brightness levelBRIGHTNESS
Toggle between input sourcesINPUT
MODE
M
INFO
i
SERVICE
i
ADVANCED
KEYSTONE
BRIGHTNESS CONTRAST COLOR
LENS ZOOM
LANGUAGE
INPUT
LENS FOCUSASPECT RATIO LENS SHIFT
9OSD Lite Menu
8Starting Projector
OFF/STBY
ON
Error
During Start-up
1 sec 1 sec 1 sec 1 sec 1 sec
Status Led
IR Position
Front
IR Position
Rear
7Remote Control
Quick Keys
Quick Key 1
Quick Key 2
Push Menu-UP twice
for instant ‘Picture Mute’
(for Remote and keypad)
Push Menu-OK for
quick access to the
Focus/Zoom Menu
Feedback LED
Menu - UP
Menu - RIGHT
Menu - OK
Menu - LEFT
Menu - DOWN
Home/Menu
Battery Lid
(Slide down
to open)
Power
On/StandBy
(See User Manual for detailed info on Inputs)
6Input Cables
M6x1 depth 8
(4x)
216,2
241,2
30
125
160
*(Ceiling mount system is not included)
Please check the manual of your
supportsystem for compatability
Unit Weight: 18 kg max.
5Ceiling Mount*
Loosen 3 screws to remove rear cover
and gain access to the inputs panel.
4Rear Cover
Pull the lever towards the front
while sliding in the lens.
Click!
Pull
forward
4
3
2
1
3Lens Assembly B
Remove protective covers
from both ends of the lens
before starting assembly.
3
2
1
2Lens Assembly A
(EU/US/CH)
user
manual
AAA (2x)
1Packaging Contents
Quick Setup Guide
Congratulations on purchasing
this product
PGWU-61B
PGWX-61B
PGXG-61B