Barco 98 28070 User manual

BARCO Universal VGA Interface
98 28070 (230 VAC)
98 28079 (120 VAC)

BARCOPROJECTIONSYSTEMS
BARCO Universal VGA Interface
98 28070 (230 VAC)
98 28079 (120 VAC)
WARNING
As the plug on the power supply cord serves as the disconnect
device, the socket-outlet shall be installed near the equipment and
shall be easily accessible.
* IBM is a trademark of International Business Machine Incorporated
JVH230994 R5975096 r01

WARNING
TO PREVENT FIRE OR ELECTRICAL SHOCK, DO NOT EXPOSE THIS
INTERFACE TO RAIN OR MOISTURE
274.DRW
screw caps
SAFETY
POWER REQUIREMENTS
Power requirements for electrical equipment differ from area to area. Please
ensure that your apparatus meets the power requirements in your area.
If the Power cord of the Interface is equipped with a ANSI
73.11 PLUG,
Factory preset Power Voltage for this interface is 120 VAC
60mA 50/60Hz.
If the Power cord of the Interface is equipped with a CEE 7
PLUG,
Factory preset Power Voltage for this interface is 230 VAC
40mA 50/60Hz.
If in doubt, consult a QUALIFIED TECHNICIAN for voltage conversion.
POWER ADAPTATION
To adapt the power voltage of the interface, the following must be strictly followed:
Warning: unplug the power cord
before proceeding to the power
voltage adaptation of the inter-
face.
1. Remove the top cover to access
the interface module.
-remove the screw caps
-remove the screws
-separatebottomfromtopcover

2. For nominal 230VAC operation,
proceed as follow:
-change the line fuse to a 80mA
slow blow type fuse
-remove the two 120V soldered
links on the module (Fig. b).
-solder one link provided for
230V operation (Fig. a).
-cut the existing wall plug off the
power cord and strip the wires
back to attach the appropriate
power plug, CEE 7
2. For nominal 120VAC operation,
proceed as follow:
-changethelinefusetoa100mA
slow blow type fuse
-remove the 230V soldered link
on the module (Fig. a).
-solder two links provided for
120V operation (Fig. b).
-cut the existing wall plug off the
power cord and strip the wires
back to attach the appropriate
power plug, ANSI 73.11
Power cord with ANSI 73.11 plug
The wires of the power cord are colored
in accordance with the following code
ANSI 73.11 plug
Green/yellow: Ground
White: Neutral
Black: Line (Live)
Power cord with CEE 7 plug
The wires of the power cord are colored
in accordance with the following code
CEE 7 plug
Green-and-yellow: Earth (safety earth)
Blue: Neutral
Brown: Line (Live)
120VAC operation
line fuse
230VAC operation
line fuse
T80mA T100mA
120V links
230V
link
Fig. bFig. a

THE BARCO UNIVERSAL VGA INTERFACE
Application
For interfacing the BARCO projectors to any IBM PC (or compatible PC) up to
resolutions of 1280 at 1024 pixels. .
Computer Interface application drawing
IBM PC or compatible PC with monitor
unplugged from the graphics card
AAAA
A
AAA
A
AAA
A
AAA
A
AAA
AAAA
AAAA
AAAA
AAAA
AAAA
AAAA
AAAA
AAA
AA
A
AA
A
AA
A
AA
A
AAA
A
If the interconnection monitor/interface is not made, install
the correct identification code (ID bit) with the switches
Indication lamp monitor available or not.
No monitor available : lights up.
to wall outlet
Powerindicationlamp
Power connection
Interconnection Interface/Computer
BARCO Interface
cable

ID Bit Combinations
Monitor Type Bit3 Bit2 Bit1 Bit0
IBM12 Monochrome 12" VGA 1 1 0 1
IBM14L8 Color 14" XGA 1 0 1 0
IBM14L10 Color 14" XGA 1 0 1 0
IBM14V Color 14" XGA 1 0 1 0
IBM14P/14X/14XG Color 14" XGA 1 0 1 0
IBM14PT/14XT Color 14" XGA 1 0 1 0
IBM15V Color 15" XGA 1 0 1 0
IBM15P/15X/15XG Color 15" XGA 1 0 1 0
IBM15PT/15XT Color 15" XGA 1 0 0 1
IBM17V /17SColor 17" XGA 1 0 1 0
IBM17P/17X/17XG Color 17" SXGA 1 0 0 1
IBM17PT/17XT Color 17" SXGA 1 1 0 1
IBM21P/21X/21XG Color 21" PXGA 1 0 0 1
IBM21PT/21XT Color 21" PXGA 1 1 0 1
IBMPS/Valuepoint 6312 Color 14" Color 1 0 1 0
IBMPS/Valuepoint 6314 Color 14" XGA 1 0 1 0
IBMPS/Valuepoint 6317 Color 17" XGA 1 0 1 0
IBMPS/Valuepoint 6318 Color 14" XGA 1 0 1 0
IBMPS/Valuepoint 6319 Color 15" XGA 1 0 1 0
IBM PS/2 8503 monochrome 12" 1 1 0 1
IBM PS/2 8504 monochrome 12" 1 1 0 1
IBM PS/2 8506 monochrome 17" Portrait 0 1 0 1
IBM PS/2 8507 monochrome 19" XGA 1 0 0 1
IBM PS/2 8508 monochrome 19" 0 1 1 0
IBM PS/2 8511 Color 14" VGA 1 1 1 0
IBM PS/2 8512 Color 14" VGA 1 1 1 0
IBM PS/2 8513 Color 12" VGA 1 1 1 0
IBM PS/2 8514 Color 16" XGA 1 0 1 0
IBM PS/2 8515 Color 14" XGA 1 0 1 1
IBM PS/2 8516 Color 14" XGA 1 0 1 1
IBM PS/2 8517 Color 17" H 0 1 0
IBM PS/2 8518 Color 14" VGA 1 1 1 0
IBM 9504 monochrome 21" 0 1 0 H
IBM 9507 LCD VGA 10" Color 0 1 1 0
IBM PS/2 9515 Color 14" XGA 1 H 1 1
IBM PS/2 9517 Color 14" XGA H H 1 0
IBM PS/2 9518 Color 14" VGA75 1 H 1 0
IBM PS/2 6091-016 Color 16" V 1 1 0
IBM PS/2 6091-19i Color 20" V 1 0 0
For other monitors or VGA cards, consult the delivered manual for the correct ID bit setting.

Interconnection Interface output/display device
BLUE GREEN
RED
Gain adjustment
BG VH/CR
Output to display
Selection Composite/Hor. & Vert. Sync
Display controls
GAINAdjustment
1/1
min max

WALL MOUNTING
The interface is provided with two holes on the bottom cover to allow
wall mounting.
229 mm

BARCO NV / Projection Systems
Noordlaan 5
B-8520 Kuurne
Belgium
Printed in Belgium