barebones Vintage Flashlight User manual

VINTAGE FLASHLIGHT
User Guide

PRODUCT COMPONENTS
Front View (Extended)
Back View (Extended)

For optimal performance, charge fully before first use.
Remove Bottom Cap by turning counterclockwise.
Insert Li-ion Battery top first into battery slot.
Li-Ion Battery top is marked with a ( ) icon.
Reattach Bottom Cap by turning clockwise until
tightened securely.
Battery Life Indicator
USB-C Charging Port
USB-C Cable
Li-ion Battery 18650
Barebones Specific
Handle Housing
Bottom Cap
Hanging Hook
Power Button
Head
DO NOT REMOVE
PLASTIC WRAP ON BATTERY
KEY
Install battery before use.
1.
2.
3.
QUICK USE

POWER / BRIGHTNESS MODES
Use Power Button to turn flashlight on, o, and to cycle
through brightness modes.
First Click:
Second Click:
Third Click:
TELESCOPING BEAM
Extend or collapse flashlight head to adjust beam.
Power On / Low Brightness
High Brightness
Power O
Collapse Flashlight Head
Wide Beam Focus
Extend Flashlight Head
Narrow Beam Focus
OPERATING INSTRUCTIONS

OPERATING INSTRUCTIONS
CHARGING
All three lights on Battery Life Indicator will be solidly
lit when fully charged (Full Charge ≈ 3-4 hours).
HOW OFTEN SHOULD I RECHARGE THE FLASHLIGHT?
To prolong the life of the Li-ion Battery, it’s important
to keep it charged. The battery needs to be charged
every six months, even if not in regular use.
WHY IS MY BATTERY LIFE INDICATOR BLINKING?
The Battery Life Indicator will begin blinking when it’s
time to charge the battery.
WHERE CAN I GET A REPLACEMENT BATTERY?
The Vintage Flashlight is only compatible with the
Barebones specific Li-ion Battery 18650 | 2200mAh 3.7V
8.14Wh. Dierent brands, sizes, capacity, or type may
cause damage to the flashlight.
Replacement Barebones batteries can be purchased at
www.barebonesliving.com.
FAQ
Gently pull head of flashlight up to expose USB-C
Charing Port.
Plug one end of USB-C Cable into charging port and
the other end into external power source.
1.
2.

CAN I STORE THE VINTAGE FLASHLIGHT OUTSIDE?
The Vintage Flashlight is not meant to be stored outside
for long periods of time. Extended exposure to wet
conditions may cause rust and unnecessary wear and
tear. We recommend storing your lantern indoors after
use to help it last as long as possible and to avoid the
need to purchase a replacement.
HOW DO I CLEAN THE LENS ON MY FLASHLIGHT?
We recommend cleaning the flashlight lens with an
alcohol-soaked cotton swab or microfiber lens cloth for
gentle cleaning.
WARNING
Do not disassemble the sealed head. Doing so can
damage the flashlight and will void the warranty
The Vintage Flashlight is a high-intensity lighting
device. Avoid shining the light directly into eye.
This product is not intended for use by children.
FAQ

SPECIFICATIONS
2.5" x 2.5" x 6.75" (7.25" EXTENDEDDIMENSIONS
3 WATT LED BULBLED
LOW: 18±2  HIGH: 170±17LUMENS
4000KTEMPERATURE
3.6V DCVOLTAGE
LIION 18650 | 2200mAh 3.7V 8.14WhBATTERY
LOW: 15 HRS  HIGH: 1.5 HRSRUN TIME
34 HRSRECHARGE TIME
5V, 2A USBCINPUT

ONLINE VERSION
072222
BAREBONESLIVING.COM
DESIGNED IN UTAH | MADE IN CHINA
1215 WILMINGTON AVE #140
SALT LAKE CITY, UT 84106
1.855.895.7040
[e-mail]