BarkTec BT-100 User manual

1. Remove the battery cover and make sure the battery
is placed in the right way with positive to positive and
negative to negative.
(NOTE: If the battery is not fit and is shaking around,
grab a ball point pen and gently bend the pins in
slightly so it holds the battery comfortably. See image
below)
2. Turn on the device with the switch on the front. A test
spray will occur so make sure you aim the spray away
from your face and body
3. Fill the collar with the citronella can provided inside
the box by inverting the can and placing the nozzle on
the valve. Push down and hold for 10-15 seconds to
fill.

4. Attach the collar strap to the collar by wrapping the
collar strap around the front of the collar. Ensure the
spray and valve are facing upwards.
5. Place collar on dog and secure tightly around the
neck. (Tight enough where it won’t fall off the dog and
tight enough so the microphone can hear the dog
barking noise)