Bartscher B 28 Plus User manual

B 28 Plus - B 38 Plus - B 46 Plus -
B 70 Plus - B 86 Plus
104523-104538-104548-104583-104593

Bartscher GmbH
Franz-Kleine-Str. 28
D-33154 Salzkotten
Germany
Phone: [phone]
Fax: [phone]
Technical Support Hotline: [phone]
www.bartscher.com
Version: 1.0
Date of preparation: 2021-12-10

Beschreibung

Quick Start Guide
TOUCH
Operation status
LED indicator status
Standby
every 30”
Storage container full
every 10”
Production cycle start
every 0.5”
Ice production
ON
Alarm blackout
ON 5” + OFF
Cleaning cycle
ON 3” + OFF
In case of alarm:
1. To turn the buzzer off, touch a control key.
2. Touch a control key again to reset the alarm (should it be stopped
beforehand).
ATTENTION! Should subsequent alarms appear, contact the service
company.
Setting
Ice cube weight
Setting
Storage container probe
Ice phase
3 TIMES
TOUCH
Standby
phase
3 TIMES
TOUCH
WHITE
RED
WHITE
RED
Setting change through
a touch
Setting change through
a touch
After 60” the setting is
saved
After 60” the setting is
saved
EN

104523 1 / 35
Original instruction manual
1Safety............................................................................................................2
1.1 Explanation of Signal Words....................................................................2
1.2 Safety instructions....................................................................................3
1.3 Intended Use ...........................................................................................5
1.4 Unintended Use.......................................................................................5
2General information.......................................................................................6
2.1 Liability and Warranty ..............................................................................6
2.2 Copyright Protection ................................................................................6
2.3 Declaration of Conformity ........................................................................6
3Transport, Packaging and Storage................................................................7
3.1 Delivery Check.........................................................................................7
3.2 Packaging................................................................................................7
3.3 Storage....................................................................................................7
4Technical Data...............................................................................................8
4.1 Technical Specifications ..........................................................................8
4.2 List of Components of the Appliance .....................................................13
4.3 Operation...............................................................................................14
5Installation and operation ............................................................................14
5.1 Installation..............................................................................................14
5.2 Operation...............................................................................................18
6Cleaning ......................................................................................................22
6.1 Safety Instructions for Cleaning.............................................................22
6.2 Cleaning.................................................................................................22
7Possible Malfunctions..................................................................................26
8Disposal....................................................................................................... 29

Safety
2 / 35 104523
EN
Diese Bedienungsa nleitung beschreibt di eI nstallation, Bedienu ngu nd Wartung des Geräts u ndg ilt als wichtige Infor mationsquelle un dN achschlagewer k.Di e Kenntnis aller enthalt enen Sicherheitshin weise und Handlungs anweisungen schaf ft dieV oraussetzung f ürdas si chere und sachger echte Arbeite n mitd emG erät. Darüber hin aus müssen die für den Eins atzbereich des Geräts gelt enden örtlichen Unfall verhütungsvorsc hriften und allgem einen Sicherheitsb estimmungen eing ehalten werden. Diese Bedi enungsanleitung ist Bestandteil des Prod ukts und muss in unmittelbarer Näh e des Geräts für das In¬stall ations-, Bedienu ngs-, Wartungs- und R einigungspersonal jed erzeit zugänglich auf¬b ewahrt werden. W enn das Gerät an eine dritt ePers on
weitergegeben wird , muss die Bedienungsa nleitung mit ausgehä ndigt werden.
Read this instruction manual before using and keep it available
at all times!
This instruction manual contains information about installation, operation and
maintenance of the appliance and constitutes an important source of information
and reference guide. The knowledge of all operational and safety instructions
included in this manual is a prerequisite for safe and proper handling of the
appliance. Additionally, accident prevention, occupational health and safety, and
legal regulations in force in the area the appliance is used apply.
Before you start using the appliance, especially before turning it on, read this
instruction manual in order to avoid personal injuries and property damages.
Improper use may cause damage.
This instruction manual forms and integral part of the product and must be stored in
an immediate vicinity of the appliance and be available at all times. The instruction
manual should be transferred together with the appliance.
1 Safety
This appliance has been manufactured in accordance with technical standards
currently in force. However, the appliance may be a source of hazards if used
improperly or contrary to its intended purpose. All persons using the appliance must
consider information included in this instruction manual and observe safety
instructions.
1.1 Explanation of Signal Words
Important safety instructions and warning information are indicated in this
instruction manual with appropriate signal words. You must strictly follow the
instructions, to prevent accidents, personal injuries and property damages.
DANGER!
The signal word DANGER warns against hazards that lead to severe
injuries or death if the hazards are not avoided.

Safety
104523 3 / 35
EN
WARNING!
The signal word WARNING warns against hazards that may lead to
moderate or severe injuries or death if the hazards are not avoided.
CAUTION!
The signal word CAUTION warns against hazards that may lead to
light or moderate injuries if the hazards are not avoided.
,di e
IMPORTANT!
The signal word IMPORTANT indicates possible property damages,
which may occur if safety instructions are not observed.
NOTE!
The symbol NOTE indicates subsequent information and guidelines
for the user on usage of the appliance.
1.2 Safety instructions
Electrical Current
•Too high a mains voltage or incorrect installation may cause electric shock.
•The appliance may be connected only if data on the rating plate correspond with
the mains voltage.
•To avoid short-circuit, the appliance should be kept dry.
•If there are malfunctions during operation, disconnect the appliance from the
power supply.
•Do not touch the appliance’s plug with wet hands.
•Never take hold of the appliance if it has fallen into water. Immediately
disconnect the appliance from the power supply.
•Any repairs or housing opening may be carried out by professionals and
relevant workshops only.
•Do not transport the appliance, holding it by the power cord.
•Do not allow the power cord to come into contact with heat sources or sharp
edges.
•Do not bend, pinch nor knot the power cord.

Safety
4 / 35 104523
EN
•Always completely unwind the power cord.
•Never place the appliance or other objects on the power cord.
•Always take hold of the plug to disconnect the appliance from the power supply.
•Check the power cord regularly for damage. Do not use the appliance if the
power cord is damaged. If this cable is damaged, it must be replaced by
customer service or a qualified electrician in order to avoid dangers.
Incorrect operation of th e appliance may cause fire or explosion hazard d uet oig nition of its content.
Fire hazard / flammable materials hazard / explosion hazard!
•Do not use any electric devices in the appliance.
•Do not store nor use petrol or other flammable liquids and gases in the vicinity of
this or any other appliance. Those gases may cause fire or explosion hazard.
•Do not put into the appliance any explosive materials, like sprays filled with
flammable propellants. Contents of containers filled with flammable gases and
liquids may leak in low temperatures, and the contents may catch fire from
sparks generated by an electric appliance. Explosion hazard!
•In the case of coolant leakage, pull the plug from the socket. Remove all
sources of ignition in the vicinity, ventilate room and contact technical service.
Avoid coolant getting in contact with eyes, as it may cause serious eye damage.
•Never use any flammable liquids for cleaning the appliance or its parts. Gases
released may cause fire or explosion hazard.
•In the case of fire, disconnect the appliance from the power supply before
attempting adequate fire-extinguishing actions.
•Never attempt to extinguish fire with water if the appliance is connected to the
power supply. Following extinction of fire, ensure sufficient fresh air inflow.
•Defrosting process may not be sped up with mechanical means or heat energy
sources (candles or heaters) nor with any other means. Vapour produced may
cause short-circuit and too high temperatures may damage the appliance.
•All ventilation slots should not be obstructed during operation.
•Never attempt to damage cooling installation of the appliance.
Operating personnel
•This appliance is not intended to be used by persons (including children) with
limited physical, sensory or mental capabilities, nor by persons with limited
experience and/or limited knowledge.
•Children should be supervised to ensure that they are not playing with or
switching the appliance on.
Improper Use

Safety
104523 5 / 35
EN
•Unintended or prohibited use may cause damage to the appliance.
•The appliance may only be used when its technical condition is flawless and
allows for safe operation.
•The appliance may only be used when all connections are executed according
to rules of law in force.
•The appliance may only be used when it is clean.
•Use only original spare parts. Never attempt to repair the appliance on your own.
•Do not introduce any changes in the appliance nor modify it.
1.3 Intended Use
As described below, every use of the appliance for a purpose differing and/or
diverging from its intended standard use, is prohibited and considered to be an
unintended use.
The following is an intended use:
–Ice cubes preparation.
The appliance is intended for professional use only.
1.4 Unintended Use
An unintended use may lead to personal injuries or property damages caused by
hazardous voltage, fire or high temperature. The appliance may only be used to
perform tasks described in this instruction manual.

General information
6 / 35 104523
EN
2 General information
2.1 Liability and Warranty
All information and instructions in this instruction manual account for legal
regulations in force, current level of technical engineering knowledge as well as our
expertise and experience, developed over the years. If special models or additional
options are ordered, or state-of-the-art technical solutions were implemented, the
actual scope of delivery of the appliance may, in some circumstances, differ from
descriptions and numerous drawings in this instruction manual.
The manufacturer is not liable for any damages nor faults stemming from:
–failure to observe instructions,
–unintended use,
–technical alterations introduced by the user,
–usage of unapproved spare parts.
We reserve the right to introduce technical modifications to the product, intended for
improvement of the appliance and its performance.
2.2 Copyright Protection
This instruction manual, and texts, drawings and images included in it, as well as its
other components are copyright protected. It is prohibited to reproduce this
instruction manual (including its excerpts), in any form and by any means, and to
use and/or transfer its content to third parties without manufacturer’s written
permission. Violation of the above results in obligation to pay compensation. We
reserve the right to claim further damages.
2.3 Declaration of Conformity
The appliance meets the currently applicable standards and guidelines of the
European Union. We confirm the above in the EC Declaration of Conformity. We
may provide relevant Declaration of Conformity upon request.

Transport, Packaging and Storage
104523 7 / 35
EN
3 Transport, Packaging and Storage
3.1 Delivery Check
Immediately upon reception, check the delivery for completeness and possible
shipping damage. In the case of visible transport damage refuse to accept the
appliance or accept it conditionally. Mark and note the scope of damage in shipping
documents/consignment list of the shipping company and lodge a complaint.
Concealed damage must be reported immediately upon its discovery, as
compensation claims may only be filed within applicable time limits.
If you find that parts or accessories missing, please contact our Customer Service
Department.
3.2 Packaging
Do not dispose of the appliance cardboard box. It may be used to store the
appliance when relocating or when shipping the appliance to our service point in the
case of any damages.
The packaging and its elements are made of recyclable materials. Particularly,
these are: plastic films and bags, cardboard box.
When disposing of the packaging, observe applicable domestic regulations.
Recyclable packaging materials should be recycled.
3.3 Storage
Leave the packaging closed until installation of the appliance; observe external
indications concerning method of placing and storage. Store the packaging in the
following conditions only:
–in closed rooms;
–in dry and dust-free surrounding;
–away from aggressive agents;
–in a location protected against sunlight;
–in a location protected against mechanical shocks.
In the case of extended storage (over three months), make sure you check the
condition of the packaging and the parts regularly. If needed, replace the packaging
with a new one.

Technical Data
8 / 35 104523
EN
4 Technical Data
4.1 Technical Specifications
Name:
Ice-cube maker B 28 Plus
Art. No.:
104523
Material:
stainless steel, plastic, steel galvanised
Ice cube design:
tapered form (full taper)
Number of ice cube sizes:
1
Ice cube size (W x D x H), in mm:
35 x 37 x 32
Ice cube weight, in g:
20
Ice cubes output / work cycle:
18
Max. production, in kg / hour:
28 / 24
Storage container capacity, in kg / in ice
cubes, pcs:
6,5 / 325
Coolant, amount in kg:
R290 / 0,080
Climate class:
T
Water connection:
3/4"
Water outlet, Ø in mm:
20
Connected load:
0,3 kW | 220-240 V | 50 Hz
Dimensions (W x D x H), in mm:
340 x 485 x 625
Weight, in kg:
28,2

Technical Data
104523 9 / 35
EN
Name:
Ice-cube maker B 38 Plus
Art. No.:
104538
Material:
stainless steel, plastic, steel galvanised
Ice cube design:
tapered form (full taper)
Number of ice cube sizes:
1
Ice cube size (W x D x H), in mm:
35 x 37 x 32
Ice cube weight, in g:
20
Ice cubes output / work cycle:
28
Max. production, in kg / hour:
38 / 24
Storage container capacity, in kg / in ice
cubes, pcs:
11,5 / 575
Coolant, amount in kg:
R290 / 0,070
Climate class:
T
Water connection:
3/4"
Water outlet, Ø in mm:
20
Connected load:
0,59 kW | 220-240 V | 50 Hz
Dimensions (W x D x H), in mm:
500 x 540 x 700
Weight, in kg:
38,2

Technical Data
10 / 35 104523
EN
Name:
Ice-cube maker B 46 Plus
Art. No.:
104548
Material:
stainless steel, plastic, steel galvanised
Ice cube design:
tapered form (full taper)
Number of ice cube sizes:
1
Ice cube size (W x D x H), in mm:
35 x 37 x 32
Ice cube weight, in g:
20
Ice cubes output / work cycle:
28
Max. production, in kg / hour:
46 / 24
Storage container capacity, in kg / in ice
cubes, pcs:
15 / 750
Coolant, amount in kg:
R290 / 0,080
Climate class:
T
Water connection:
3/4"
Water outlet, Ø in mm:
20
Connected load:
0,68 kW | 220-240 V | 50 Hz
Dimensions (W x D x H), in mm:
500 x 580 x 800
Weight, in kg:
42,6

Technical Data
104523 11 / 35
EN
Name:
Ice-cube maker B 70 Plus
Art. No.:
104583
Material:
stainless steel, plastic, steel galvanised
Ice cube design:
tapered form (full taper)
Number of ice cube sizes:
1
Ice cube size (W x D x H), in mm:
35 x 37 x 32
Ice cube weight, in g:
20
Ice cubes output / work cycle:
56
Max. production, in kg / hour:
70 / 24
Storage container capacity, in kg / in ice
cubes, pcs:
42 / 2100
Coolant, amount in kg:
R290 / 0,100
Climate class:
T
Water connection:
3/4"
Water outlet, Ø in mm:
20
Connected load:
0,88 kW | 220-240 V | 50 Hz
Dimensions (W x D x H), in mm:
700 x 580 x 995
Weight, in kg:
53,0

Technical Data
12 / 35 104523
EN
Name:
Ice-cube maker B 86 Plus
Art. No.:
104593
Material:
stainless steel, plastic, steel galvanised
Ice cube design:
tapered form (full taper)
Number of ice cube sizes:
1
Ice cube size (W x D x H), in mm:
35 x 37 x 32
Ice cube weight, in g:
20
Ice cubes output / work cycle:
56
Max. production, in kg / hour:
86 / 24
Storage container capacity, in kg / in ice
cubes, pcs:
42 / 2100
Coolant, amount in kg:
R290 / 0,090
Climate class:
T
Water connection:
3/4"
Water outlet, Ø in mm:
20
Connected load:
0,98 kW | 220-240 V | 50 Hz
Dimensions (W x D x H), in mm:
700 x 580 x 995
Weight, in kg:
63,0
Version / Characteristics
•Cooling: air-cooled
•Fill level sensor
•Production by means of spray system
•Control: electronic
•Cleaning function
•ON/OFF switch
•Indicator light
•Can be integrated
•The set includes: 1 ice shovel
We reserve the right to implement technical modifications.

Technical Data
104523 13 / 35
EN
4.2 List of Components of the Appliance
1. Housing
2. Storage container lid
3. Storage container
4. Water drain opening
5. Lamellar curtain
6. Front bezel
7. Power cord with mains plug
8. Water connection
9. Drain port
10.Feet (4 pcs)
11.Control key
12.Ventilation openings
13.Ice shovel

Installation and operation
14 / 35 104523
EN
4.3 Operation
When producing ice cubes in the shape of a full cone using the spray system, the
supplied water is sprayed on the evaporator unit (here in the form of a water pan)
with a pump. When in contact with a suitable evaporator's element water freezes,
creating condensed, crystal clear, full ice cube cones. Due to its massive form they
provide long-lasting cooling effect and are particularly suitable for making the beast
of long drinks, for they melt slowly and do not dilute beverages too fast.
The number of ice cubes in the storage container is controlled by electronic probe,
which is located in the storage container. When ice cubes pile and reach the probe,
the appliance automatically stops production of ice cubes. When ice cubes are
removed and the probe is freed, the production of ice cubes is continued again.
NOTE!
After dispensing ice cubes from the storage container you may clean the
probe off of ice remains, so that the new production process re-starts
faster.
5 Installation and operation
5.1 Installation
CAUTION!
Incorrect installation, positioning, operation, maintenance or misuse of
the appliance may lead to personal injury or property damage.
Positioning and installation, as well as repairs may be performed by
authorised technical service only and in compliance with the applicable
national law.