Basalte eve Air User manual

+v +v -v -v
6
7
mounting the iPad
removing the iPad
a
a
a
a
b
b
b
b
2
1
3
4
5
a
b
c
puck
wall box
for puck
iPad Air
PSU
openings for
mounting the frame
magnets
magnets
lip
opening for microphone
wall box
for puck
110V/230V
screws for
security version
tool
(included with
security version)
168 mm/6.41”
43 mm/1.77”
263 mm/10.35”
173 mm/6.61”
86,5 mm/3.39”
24 mm/0.94”
159 mm/6.26”
140 mm/5.51”
50 mm/1.97”
34 mm/1.34”
77,5 mm/3.03”
vertical
mounting
horizontal mounting
vertical
mounting
horizontal mounting
4 spacers
required
for iPad Air 2
d
117 mm/4.61”
32 mm/1.26”
24 mm/0.94”

Removing the iPad
1. Remove the Eve cover.
2. Place one finger behind the iPad and another one on
the iPad as shown on the drawing (7).
3. Gently pull the iPad out of the frame making sure it
cannot fall.
4. Remove the power connector.
Dimensions
Eve Air set: 266mm/10.47” x 173mm/6.61” x 11mm/0.43”
_
Eve Air frame: 263mm/10.34” x 173mm/6.61” x 11mm/0.43”
Eve Air cover: 24mm/0.94” x 173mm/6.61” x 11mm/0.43”
Basalte bvba
Hundelgemsesteenweg 1a
9820 Merelbeke
Belgium
tel [phone]
fax [phone]
[e-mail]
www.basalte.be
Basalte is a registered trademark of Basalte bvba.
Eve is a registered trademark of Basalte bvba.
Eve, Eve Air, Eve mini and Eve touch are registered designs of
Basalte bvba.
iPad, iPad Air, iPad mini, iPad mini Retina and iPod touch are
registered trademarks of Apple Inc.
Made in Belgium
v1.3 2014 basalte©
Identification of the parts
a Eve Air frame (product number: 630-xx)
b Eve Air cover (product number: 631-xx, 632-xx)
c Eve Air cover security version (product number: 633-xx, 634-xx)
d 4 spacers for Air 2
Positioning of the wall box (not included)
A wall box should be foreseen to install the iPad power supply.
The puck (not included) is a USB power supply which fits into a
1-gang wall box and uses the standard lightning to USB Cable,
supplied with the iPad.
The wall box should be installed according to the dimensions on
the drawing (2).
Direction of the frame
The Eve frame can be mounted horizontally or vertically.
Make sure to mount the iPad in the correct direction according
to the drawing. (3). Installing the frame in the wrong direction
can damage the iPad.
Puck Power supply (not included - product number: 610-01)
Install the puck in the wall box following the instructions of the
puck manual. Connect the standard iPad to USB Cable, supplied
with the iPad, to the puck.
Installing the eve frame
Please use the correct openings of the eve frame and ensure the
screws are positioned so that they cannot damage the iPad.
Eve Air is also compatible with iPad Air 2. Since the iPad Air 2 is
thinner than iPad Air, we provide four black round spacers to
install on the Eve frame (as shown on picture 5). In this way,
the iPad Air 2 will be flush with the frame.
Mounting the iPad
1. Plug the power connector into the iPad.
2. Place the iPad with its side in the small lip according to the
drawing (6).
3. Gently push the iPad in the frame so that it is being
held by the magnets.
4. Place the eve cover making sure that the cover is not
squeezing the power cable.
1
2
3
4
5
6
7
Air