Baudcom BD-HDMI-RF Series User manual

BD-HDMI-RF Encoder modulator User’s manual V1.0
1
/
1
8
BD-HDMI-RF Series
En c od er + M odul at o r
User ’ s Ma nu a l
V 1 . 0
SHANGHAI BAUDCOM COMMUNICATION DEVICE CO.,LTD
Website: http://www.baudcom.com.cn
Email: [email protected]
Tel: [phone]
Fax: [phone]

BD-HDMI-RF Encoder modulator User’s manual V1.0
2
/
1
8
BD-HDMI-RF-24
BD-HDMI-RF-12

BD-HDMI-RF Encoder modulator User’s manual V1.0
3
/
1
8
1 Product Overview
The BD-HDMI-RF series is the latest cost-effective HD encoder
modulator. It supports 4 / 8 / 12 / 16 / 20 / 24 channels HDMI input,
1 channel Gigabit IP input / output; 4 channel(ATSC, ISDBT,
DTMBT, DVB-C/-T) output, 4 MPTS or SPTS output. With high
integration, great performance and low cost, Integrating a complete
front-end system functions, this device is widely used in varieties of
digital distribution systems such as cable TV digital head-end, IPTV
multicast, digital TV broadcasting etc.
2 Key Features
 4 / 8 / 12 / 16 / 20 / 24 channels HDMI input
 1 Gigabit IP input/output, MPTS output, UDP/RTP protocol
(multicast)
 All standard modultion (ATSC、 ISDBT、 DTMBT 、 DVB-C/-T)
output optional.
 Support 2* ASI input
 Support 2* ASI output separatly
 LCD disply and Bottons operation
 Web network management
 Support online softwel upgrading

BD-HDMI-RF Encoder modulator User’s manual V1.0
4
/
1
8
3 Specifications
Input HDMI(4/8/12/16/20/24 HDMI)
2*ASI input
Output RF output 4 frequencies（DVB-C/DVB-T/ATSC/ISDBT/DMBT）
2*ASI output
IP output, SPTS/ MPTS
Video
Encoding
Encode Format MPEG-4 AVC/H.264
Input port HDMI
Input
Resolution
1920×1080P/1920×1080i/1280×720P/720x576i/
720x480i @50/59.94Hz
Output
Resolution
1920×1080_30P,1920×1080_30P,1280×720_30P,
720x576_25P,720x480_25P
Code Rate 1Mbps~13Mbps（each channel)
Rate Mode CBR、VBR
Video
Encoding
Encode Format MPEG1 Layer2
Sample Rate 48KHz
Bit Rate 64kbps ,128Kbps,192kbps,224kbps,256kbps,320k
bps, 384kbps

BD-HDMI-RF Encoder modulator User’s manual V1.0
5
/
1
8
4 Outlook
Front pannel:
1. RF Out
2. LCD Display
3. Indicator lights
4. Bottons
5. ASI In
6. ASI OUT
7. NMS、DATA Input/ output
Rear Pannel:
1. HDMI input
2. Power switch
3. Power socket

BD-HDMI-RF Encoder modulator User’s manual V1.0
6
/
1
8

BD-HDMI-RF Encoder modulator User’s manual V1.0
7
/
1
8
6 Web Management
6.1 Description
The device is connected to the input signal, connected to the power
supply, and the equipment is controlled through the browser after
the equipment starts normally.
Web Management is for the control, managing and settings of the
digital headend equipment. The Browser to running the software
we suggest is for IE8 or higher version or Firefox.
6.2 Log on the equipment
6.2.1 Enter the IP address of the device on the browse（default address：
192.168.0.136）
6.2.2 Username and password（default address：admin）
6.2.3 Enter the Device->Status bar to clearly detect the running status
of the device

BD-HDMI-RF Encoder modulator User’s manual V1.0
8
/
1
8
6.2.4 Band menu,（L1L2L3）Indicates the state of each type of panel for
the first, second, and third boards of the lower rear panel (4 interfaces
for each board). H1H2H3 indicates the first, second, and third boards of
the upper layer of the rear panel (4 interfaces each).
A、Video parameter state
B、Audio parameter state

BD-HDMI-RF Encoder modulator User’s manual V1.0
9
/
1
8
6.2.5 Program Mux menu（Mainly for the code program reuse, parameter
modification and other settings）
A. In the output window, at frequency point, click the program name
and pop up the following window to modify the
parameters of the program.

BD-HDMI-RF Encoder modulator User’s manual V1.0
10
/
1
8
B. In the output window, click "Edit" on the right side of the
frequency point, and the following window pops up to modify the parameters
at that frequency point.

BD-HDMI-RF Encoder modulator User’s manual V1.0
11
/
1
8
C. Click on the right “MPTS” to output the MPTS program
selection

BD-HDMI-RF Encoder modulator User’s manual V1.0
12
/
1
8
6.2.6 Output->Modulator Menu
A. Click "Edit All" , pop up the following settings window,
display the output frequency of the various parameters, to modify the

BD-HDMI-RF Encoder modulator User’s manual V1.0
13
/
1
8
required parameters.
B. Click "Edit" after Channel to control the output of this
frequency point
C. Two ASI outputs that can be output by selecting a stream on any frequency
point
6.2.7 Output->Network，Network communication parameters of equipment

BD-HDMI-RF Encoder modulator User’s manual V1.0
14
/
1
8
6.2.8 MPTS output
A. MPTS output，Output protocol
B. MPTS output，address parameter，click "Edit All"
6.2.9 SPTS output

BD-HDMI-RF Encoder modulator User’s manual V1.0
15
/
1
8
6.2.10 multi-modulation selection output
A. Selected modulation mode output，New modulation will work after device
reboot

BD-HDMI-RF Encoder modulator User’s manual V1.0
16
/
1
8
B. Existing modulation modes in output devices
6.2.11 Equipment upgrade
A. Upgrade-> device modulation mode

BD-HDMI-RF Encoder modulator User’s manual V1.0
17
/
1
8
B. Upgrade-> each card in the device
6.2.12 Save Menu
A. Can be saved quickly from the top right of the page， click "Save
Config"

BD-HDMI-RF Encoder modulator User’s manual V1.0
18
/
1
8
6.2.13 Date/time，No operation, only test
6.2.14 State information monitoring，No operation, only test
6.2.15 After the device parameter is modified, it must be saved so as
not to set the device parameter again after the power is off