Bauhn AWBS-0816-S User manual

INSTRUCTION MANUAL
Model Number: AWBS-0816-S
Wall Mounted Shelves
1300 886 649 Model: AWBS-0816-S Product Code: 54265 08/2017
www.tempo.org
AUS

2
1300 886 649 Model: AWBS-0816-S Product Code: 54265 08/2017
www.tempo.org
AUS
Warranty Details 3
Welcome 4
General Safety Instructions 5
Product Overview 6
Parts List 8
Getting Started 9
Installation 10
Repair and Refurbished Goods or Parts Notice 15
Contents

1300 886 649 Model: AWBS-0816-S Product Code: 54265 08/2017
www.tempo.org
AUS
The product is guaranteed to be free from defects in workmanship and
parts for a period of 12 months from the date of purchase. Defects that
occur within this warranty period, under normal use and care, will be
repaired, replaced or refunded at our discretion, solely at our option with
no charge for parts and labour. The benefits conferred by this warranty
are in addition to all rights and remedies in respect of the product that
the consumer has under the Competition and Consumer Act 2010 and
similar state and territory laws.
Our goods come with guarantees that cannot be excluded under the
Australian Consumer Law. You are entitled to a replacement or refund
for a major failure and to compensation for any other reasonably
foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and
the failure does not amount to a major failure.
3
Wall Mounted Shelves
Warranty Details

4
1300 886 649 Model: AWBS-0816-S Product Code: 54265 08/2017
www.tempo.org
AUS
Welcome
Congratulations on choosing to buy a BAUHN®product. All products
brought to you by BAUHN®are manufactured to the highest standards of
performance and safety and, as part of our philosophy of customer service
and satisfaction, are backed by our comprehensive 1 Year Warranty. We hope
you will enjoy using your purchase for many years to come.

5
1300 886 649 Model: AWBS-0816-S Product Code: 54265 08/2017
www.tempo.org
AUS
Read this manual thoroughly before installation to ensure your and other’s safety and
to avoid property damage.
If you do not understand these directions, or have any questions in relation to
the safety of the installation, we recommend you contact a qualified professional.
For all other general enquiries, please contact the After Sales Support line on the
number at the bottom of the page.
• This product contains small items that could be a choking hazard if swallowed.
Keep these items away from young children.
• Before installation, check carefully to ensure that there are no missing or
defective parts. All parts are listed and illustrated on the following page.
• Never use defective parts. Our customer service representatives can assist you
with installation questions and replacement for missing or defective parts.
• Do not use this product for any purpose that is not explicitly specified in this
manual.
• Improper installation may cause damage or serious injury.
• We assume no liability for any eventual damage or injury caused by incorrect
mounting, incorrect assembly or incorrect use.
• This product is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, unless they have been given
supervision or instruction by a person responsible for their safety.
• This is not a toy. Keep the Wall Mounted Shelves and the equipment on it away
from infants and children. Young children should be supervised to ensure they
do not play with the product.
• This product is intended for indoor use only.
General Safety Instructions
IMPORTANT:
Choose a structurally-sound wall area that is strong enough to hold the
weight of the Wall Mounted Shelves as well as the equipment on them.
DO NOT attach the Wall Mounted Shelves to a hollow wall or decorative room
divider.
Mount the shelves far away from any water source and direct sunlight.
Be aware of the health hazard associated with asbestos fibres potentially
present in structure when drilling.

6
1300 886 649 Model: AWBS-0816-S Product Code: 54265 08/2017
www.tempo.org
AUS
10kg (22lbs)
per shelf
• Suitable for DVD players, game consoles, cable box etc.
Shelf size 14.17” x 9.84” (36cm x 25cm).
• This product is designed to be installed on wood stud walls or solid
concrete walls.
• Before installing, make sure the wall is strong enough to support the
combined load of the Wall Mounted Shelves AND the equipment it will
be holding. Never exceed the maximum load capacity of 10kg (22lbs) per
shelf, or else it may result in product failure or personal injury.
Wall Mounted Shelves
Product Overview

7
1300 886 649 Model: AWBS-0816-S Product Code: 54265 08/2017
www.tempo.org
AUS
Required tools
The Illustration below highlights the tools that will be required to complete a
basic installation.
Product Overview (Cont.)
(For installation on
a stud wall only)
Ø8mm Ø4mm
Concreate Drill Bit Wood Drill Bit
Stud Finder
Socket Wrench
Electric Drill
Phillips Screwdriver
Pencil
Hammer
Tape Measure Spirit Level
Concrete Drill Bit

8
1300 886 649 Model: AWBS-0816-S Product Code: 54265 08/2017
www.tempo.org
AUS
Parts List
Wall Mounted Shelves (Fully Assembled)
Assembly hardware
The illustration below is to help you identify the parts; some parts are not
shown at the same scale.
A
5 x 50
3 pcs
B
8 x 6 x 50
3 pcs
C
D
M5 x 12
2 pcs
E
M5 x 16
4 pcs
F
Bracket
Assembly
2 sets
Allen Key
1 pc
Glass Shelf
Wall Mount Bar
Shelf Support
Bracket
Plastic Cap
360 mm
250 mm
2 pcs
1 pcs
360 mm
2 pcs
2 pcs
Plastic Supports

9
1300 886 649 Model: AWBS-0816-S Product Code: 54265 08/2017
www.tempo.org
AUS
Getting Started
IMPORTANT!
Consult your builder for advice if you want to install the bracket to a wood
stud wall. The wall must be strong enough for the weight of the Wall
Mounted Shelves and its contents.
Before you start installing
• Unpack the product but keep all packaging materials until you have made
sure your new Wall Mounted Shelves is undamaged. (In case of damage,
contact our after sales support line for advice on examination, repair or
return of the damaged product.) Plastic wrapping can be a suffocation
hazard for babies and young children, so ensure all packaging materials
are out of their reach.
• Read this manual to familiarise yourself with all the parts and installation
instructions. Pay particular attention to the safety instructions on page 5.
• All the parts that are supplied for installation are pictured on page 8 with
their respective part identification letter (A to F). Sort the items accordingly
so you know which ones to use during installation.

10
1300 886 649 Model: AWBS-0816-S Product Code: 54265 08/2017
www.tempo.org
AUS
Installation
Step 1: Attaching the wall mount plate
On a concrete/brick wall
a) Using the Wall Mount Bar as a template, mark then drill three holes of
8mm diameter. Ensure the holes are 60mm in depth, as illustrated below.
NOTE: Use a spirit level to ensure the wall mount bar is flat and even.
WARNING: Do not drill into mortar joints.
b) Tap the three plastic anchors (B) into the holes on the concrete/brick wall.
c) Hold the Wall Mount Bar to the wall and align the holes in the bar to the
holes drilled into the wall.
d) Screw the Wall Mount Bar to the wall with the four self-tapping screws
(A).
NOTE: To insert the self-tapping screws (A) through the Wall Mount Bar, pull the
two sides apart to allow enough clearance for the screw to pass through.
A
A
B

11
1300 886 649 Model: AWBS-0816-S Product Code: 54265 08/2017
www.tempo.org
AUS
Installation (Cont.)
Step 2: Preparing the Shelf Support Brackets to be attached to the Wall
Mount Bar
a) Clip the four plastic supports for the glass onto the Shelf Support
Bracket.
b) Repeat this for the second Support Bracket.
On a wood stud wall
a) Locate the edges of the studs in the wall using a commercially available
stud finder and mark the centre of the studs. Confirm the presence of the
studs by drilling a small diameter pilot hole.
b) Using the Wall Mount Bar as a template, markout then drill three holes of
4mm diameter. Ensure the holes are 60mm in depth, as illustrated above.
c) Hold the Wall Mount Bar to the wall and align the holes in the bar to the
holes drilled into the wall.
d) Screw the Wall Mount Bar to the wall with the three Self-Tapping Screws
(A).
NOTE: When you are installing the wall mount bar to a wood stud wall,
consult your builder for advice. The wall must be strong enough to
support the weight of the wall mount bar and its equipment.
E
DF

12
1300 886 649 Model: AWBS-0816-S Product Code: 54265 08/2017
www.tempo.org
AUS
Installation (Cont.)
Step 3: Attach the Shelf Support Brackets to the Wall Mount
a) Slide the Shelf Support Bracket onto the Wall Mount Bar and tighten
using the supplied Allen key (F) in the desired position.
b) Repeat for the second Support Bracket.
F
Bracket assembly
Self support
bracket
Side skirting
Wall mount bar

13
1300 886 649 Model: AWBS-0816-S Product Code: 54265 08/2017
www.tempo.org
AUS
Installation (Cont.)
WARNING!
• Tighten all bolts necessary for the installation of the Wall Mounted
Shelves firmly to ensure the Shelf Support is securely attached to the
wall Mount. Do not overtighten them, which can damage them and
greatly reduce their holding power.
• Tighten all the screws securely.
• Do no remove or loosen any screw or bolt until it is no longer mounted
on the Wall. Doing so may cause the Shelf to fall.
Step 4: Attaching the Glass Shelf & End Caps
a) Place the Glass Shelf on top of the support brackets. Using the supplied
bolt (C) and Allen Key (F) gently tighten the bolt to secure the Glass Shelf.
NOTE: Do not over tighten the bolt securing the Glass Shelf as this will cause
damage or failure of the glass plate.
b) Repeat the same procedure for the second Glass Shelf.
c) Lastly clip on the top and bottom End Caps.
F
C
C

14
1300 886 649 Model: AWBS-0816-S Product Code: 54265 08/2017
www.tempo.org
AUS
Installation (Cont.)
Cable management
To run cables through the skirting on the left and right sides of the Wall Mount
Bar.
a) Break open the clips on the top and bottom end Caps.
b) Run the cables through the skirting.
NOTE: If the cable plugs are large and cannot be run through the skirting,
remove the end Caps and insert the cable from the side of the skirting.
c) To connect cables to the devices on the shelf, exit the cables from the
recesses on the sides of the skirting.
Push the
tab out.
IMPORTANT!
Attaching the Wall Mounted Shelves to a wall requires specialist
knowledge. We assume no liability for any injury or material damage
incurred due to incorrect assembly or use. Make sure to follow all
instructions in this manual, and if you require professional advice, please
consult a relevant tradesperson.

Wall Mounted Shelves
Repair and Refurbished
Goods or Parts Notice
Unfortunately, from time to time, faulty products are manufactured and may need
to be returned to the supplier for repair.
Please be aware that if your product is capable of retaining user-generated data
(such as files stored on a computer hard drive, telephone numbers stored on
a mobile telephone, songs stored on a portable media player, games saved on
a games console or files stored on a USB memory stick) during the process of
repair, some or all of your stored data may be lost. We recommend you save this
data elsewhere prior to sending the product for repair.
You should also be aware that rather than repairing goods, we may replace them
with refurbished goods of the same type or use refurbished parts in the repair
process.
Please be assured though, refurbished parts or replacements are only used
where they meet ALDI’s stringent quality specifications.
If at any time you feel your repair is being handled unsatisfactorily, you may
escalate your complaint. Please telephone us on 1300 886 649 or write to us at:
Tempo (Aust) Pty Ltd ABN 70 106 100 252
PO BOX 6056 Frenchs Forest, Sydney, Australia NSW 2086
Tempo Help Desk: 1300 886 649 (Aust)
(Operating Hours: Mon-Fri 08:30AM to 06:00PM AEST)
Email: [email protected]g
REGISTER YOUR PURCHASE AT www.aldi.com.au/en/about-aldi/product-registration TO KEEP UPDATED WITH IMPORTANT PRODUCT INFORMATION
1300 886 649 Model: AWBS-0816-S Product Code: 54265 08/2017
www.tempo.org
AUS

Warranty returns
Should you for any reason need to return this product
for a warranty claim, make sure to include all accessories
with the product.
Product does not work?
If you encounter problems with this product, or if it fails
to perform to your expectations, please contact
our After Sales Support Centre on 1300 886 649 before
returning it to the store for a refund.