VisioBook – Service – Replacing Battery
Version 1.0e Seite 2 von 3
Replacing the Battery Pack:
Tools: Hexagon screwdriver: Wrench size 2mm
Parts: 1x Battery pack
1x Foam rubber strip
1x Insulating foil
7x Screws DIN 7984 M3x6
Start with VisioBook being collapsed!
1.1. To remove base plate remove 7 screws (DIN 6912 M3x6).
(see 1.1)
1.1
1.2. Unplug battery cable from charger PCB.
(see 2.1)
1.3. Now you can remove the battery from the battery housing.
(see 2.2)
1.4. When inserting the battery, pay attention to fit battery pack together with
insulating foil into battery housing.
1.5. Glue a foam rubber strip to the new battery pack. (Between battery pack and
base plate).
(see 2.3)
1.6. Position base plate form-fit on battery housing, first slightly tighten all 7 screws
(M3x6) and then tighten them firmly.
(see 1.1)
