Baumatic PHG602 User manual

1
B70.1BL 60 cm 4 Burner glass gas hob with
thermocouples
PHG602 60 cm 4 Burner glass gas hob with
thermocouples
B77TCBL 70 cm 5 Burner gas glass hob with
thermocouples.
B72BL 60 cm 4 Burner glass gas hob
B77BL 70 cm 5 Burner glass gas hob

User Manual for your Baumatic
B70.1BL 60 cm 4 Burner gas glass hob
with thermocouples
PHG602 60 cm 4 burner gas glass hob
with thermocouples
B77TCBL 70 cm 5 burner gas glass hob
with thermocouples
B72BL 60 cm 4 burner gas glass hob
B77BL 70 cm 5 burner gas glass hob
NOTE: This User Instruction Manual contains important
information, including safety & installation points, which will
enable you to get the most out of your appliance. Please keep it
in a safe place so that it is easily available for future reference; for
you or any person not familiar with the operation of the appliance.
2
DD 19/05/09

3
Contents
Environmentalnote 4
Important safety information 5 – 7
Specifications 8 – 14
B70.1BL 8
PHG602 9
B77TCBL 10
B72BL 11
B77TCBL 12
Electricaldetails 13
Gasdetails 13
Gas hob surface layout 13 - 14
Using the gas hob 15 - 16
Beforefirstuse 15
Switchingthehobon 15
Automatic ignition (B72BL/B77BL) 15 - 16
Automatic ignition with flame failure safety device 16
(B70.1BL/PHG602/B77TCBL)
Energy saving tips 16 - 17
Cleaning 17 - 18
Cleaning the hob top 17
Aftereachuse 18
Cleaning the hob burners 18
Maintaining the cast iron pan stands 18
Installation 19 - 29
Positioning 20
Unpacking the appliance 21
Installing the appliance 21 - 23
Gasconnection 23
Ventilation requirements 24
Gas Safety (Installation and Use) Regulations 25
Gas Adjustment (Conversion to LPG) 26 - 27
Minimum flow adjustment for hob gas taps 27
Gastapmaintenance 28
Electricalconnection 29
Replacing the mains supply cable 29
My appliance isn’t working correctly 30
Contactdetails 31

Environmental note
4
oThe packaging materials that Baumatic uses are environmentally
friendly and can be recycled.
all packaging material with due regard for the
environment.
oPlease discard

5
Important safety information
Your safety is of the utmost importance to Baumatic.
Please make sure that you read this instruction booklet
before attempting to install or use the appliance. If yo
are unsure of any of the information contained in t
u
his
ooklet, please contact the Baumatic Advice Line.
old use and for
in
ient temperature of the
n at
of this temperature limit, will be the liability of
uarantee. The foregoing does not
f Baumatic Ltd.
ld not use this appliance to store items on or as a work
ept away
service
b
General Information
This appliance is designed for domestic househo
the cooking and frying of domestic foodstuffs.
oIMPORTANT: The adjacent furniture and all materials used
the installation must be able to withstand a minimum
temperature of 85°C above the amb
room it is located in, whilst in use.
oCertain types of vinyl or laminate kitchen furniture are
particularly prone to heat damage or discolouratio
temperatures below the guidelines given above.
oAny damage caused by the appliance being installed in
contravention
the owner.
oYour new appliance is guaranteed against electrical or
mechanical defects, subject to certain exclusions that are noted
in Baumatic’s Conditions Of G
affect your statutory rights.
oThe use of this appliance for any other purpose or in any other
environment without the express agreement o
will invalidate any warranty or liability claim.
oYou shou
surface.
oNo modifications to the appliance are permitted by Baumatic Ltd.
oYou should not store or place flammable or highly flammable
liquids/materials on top of or near the appliance. Items made
from aluminium, plastic or plastic film should also be k
from the appliance, as they may fuse to the surface.
oRepairs may only be carried out by Baumatic
engineers or their authorised service agent.

6
hild Safety
d
e at any time. During and after use, all
surfaces will be hot.
se ensure that they are kept under close supervision
at all times.
ld only be allowed to utilise the appliance
when supervised.
eneral Safety
e installed and connected by a
CORGI registered installer.
rfaces
ild the appliance into, meet with the relevant
standards.
uring use
ob surface when it
is delivered should be removed before use.
appliance, otherwise
there is a risk of burns being caused.
e
with the hob surface when it is hot or any hot
cookware.
g with fat and oil the appliance should
not be left unattended.
sure that all of the cooking zones are switched off after
use.
C
oBaumatic strongly recommend that babies and young children
are prevented from being near to the appliance and not allowe
to touch the applianc
oIf it is necessary for younger family members to be in the
kitchen, plea
oOlder children shou
G
oThe appliance should only b
oCare should be taken to ensure that the units and work su
that you bu
D
oAny film or stickers that are present on the h
oCare should be used when utilising the
oYou should not allow the electrical connection cables to com
into contact
oIf fat and oil overheats, then it can ignite extremely quickly. For
this reason, when cookin
oMake

7
leaning
Cleaning of the hob should be carried out on a regular basis.
iance, it
should be disconnected from the mains and cool.
using this appliance and when
following the cleaning procedure.
high pressure
cleaning equipment to clean the appliance.
ce
ection of this booklet that refers to installation.
esult of improper
use or installation of this appliance.
ion
Vehicle, the requirements of N 721 MUST be followed.
this appliance is
installed on any type of marine vessel.
eclaration of conformity
This appliance complies with the following European Directives:
MC Directive inclusive of
92 Materials that can touch food.
N60335-1, EN60335-2, EN301-1 Safety Standards.
ith
ce must be used by a
ained person for domestic purposes only.
C
o
oIMPORTANT: Before attempting to clean the appl
oGreat care should be taken whilst
oYou should not use a steam jet or any other
Installation
This appliance must be correctly installed by a
CORGI registered installer, strictly in accordan
with the manufacturer’s instructions and the
relevant British Standards. Please see the specific
s
oBaumatic Ltd. declines any responsibility for injury or
damage, to person or property, as a r
oIf the appliance is being used in a Leisure Accommodat
oBaumatic Ltd. DO NOT recommend that
D
-73/23/EEC dated 19/02/1973 Low Voltage Directive.
-89/336/EEC dated 03/05/1989 E
Amending Directive 92/31/EEC.
-93/68/EEC dated 22/07/1993 CE Marking Directive.
-89/109/EEC dated 25/01/19
-90/396/EEC Gas Products.
-E
The manufacturer declares that the hob is built using certified
materials and requires the appliance to be installed in accordance w
the standards currently in force. This applian
tr

8
pecificationsS
B70
Width: 560 mm
rs
on each burner
n stands
oLPG conversion jets
.1BL
Product dimensions: Aperture dimensions:
Height: 510 mm Height: 490 mm
Width: 580 mm
Depth: 50 mm
Product specifications:
o1 x 3.00 kW rapid burner
o2 x 1.75 kW semi-rapid burne
o1 x 1.00 kW auxiliary burner
oSide control operation
Automatic ignitiono
oFlame failure safety device
oRANA cast iron pa
Standard accessories:

9
HG602
roduct dimensions: Aperture dimensions:
Width: 560 mm
epth: 50 mm
roduct specifications:
rs
1 x 1.00 kW auxiliary burner
tion
on each burner
ron pan stands
Frameless
tandard accessories:
oLPG conversion jets
P
P
Height: 510 mm Height: 490 mm
Width: 580 mm
D
P
o1 x 3.50 kW rapid burner
o2 x 1.75 kW semi-rapid burne
o
oFront control opera
oAutomatic ignition
oFlame failure safety device
oRANA cast i
o
S

10
77TCBL
roduct dimensions: Aperture dimensions:
Width: 562 mm
epth: 50 mm
roduct specifications:
rs
1 x 1.00 kW auxiliary burner
tion
on each burner
RANA cast iron pan stands
tandard accessories:
oLPG conversion jets
B
P
Height: 510 mm Height: 490 mm
Width: 680 mm
D
P
o1 x 3.50 kW wok burner
o1 x 3.00 kW rapid burner
o2 x 1.75 kW semi-rapid burne
o
oFront control opera
oAutomatic ignition
oFlame failure safety device
o
S

11
72BL
roduct dimensions: Aperture dimensions:
Width: 560 mm
epth: 50 mm
roduct specifications:
rs
1 x 1.00 kW auxiliary burner
tion
RANA cast iron pan stands
tandard accessories:
oLPG conversion jets
B
P
Height: 510 mm Height: 490 mm
Width: 580 mm
D
P
o1 x 3.00 kW rapid burner
o2 x 1.75 kW semi-rapid burne
o
oFront control opera
oAutomatic ignition
o
S

12
77BL
roduct dimensions: Aperture dimensions:
Width: 562 mm
epth: 50 mm
roduct specifications:
rs
1 x 1.00 kW auxiliary burner
tion
RANA cast iron pan stands
tandard accessories:
oLPG conversion jets
B
P
Height: 510 mm Height: 490 mm
Width: 680 mm
D
P
o1 x 3.50 kW wok burner
o1 x 3.00 kW rapid burner
o2 x 1.75 kW semi-rapid burne
o
oFront control opera
oAutomatic ignition
o
S

13
lectrical details
Supply Connection: itched fused outlet with
ains Supply Lead: 3 core x 0.75mm² (Type RR-F <HAR> marked)
as details
Town gas G110 – 120 (8 mbar) to order.
n
ood idea to record
is information before you install your appliance.
odel Number ……………………………….
erial Number ……………………………….
ate of Purchase ……………………………….
as hob surface layout
70.1BL
E
Rated Voltage: 230 Vac 50 Hz
3 A (double pole sw
3mm contact gap)
Max Rated Inputs: 0.008 to 0.02 kW (depending on model)
M
G
Connection: Rp ½ (ISO R7)
Type: Natural Gas (20.9 mbar),
Alternative LPG G30 (28-30 mbar),
For future reference please record the following information which ca
be found on the rating plate and the date of purchase which can be
found on your sales invoice. The rating plate of your hob is located on
the underneath of the appliance. Therefore it is a g
th
M
S
D
G
B

14
72BL/PHG602
77BL/B77TCBL
B
B

15 15
sing the gas hobU
Before first use
IMPORTANT: You should clean the hob surface (see
Cleaning and maintenance” section).
ymbols will appear on the control panel, next to each
arge flame: maximum setting
mall flame: minimum setting
is at the end of the anti-clockwise rotation
ust be selected between the maximum
lect a knob position between the maximum and off
to the control knob will
(B72BL/B77BL)
wish to light and
depressed, the automatic ignition
f, turn the control knob fully clockwise to
the gas off position.
“
Switching the hob on
The following s
control knob:
0 = gas off
L
S
oThe minimum setting
of the control knob.
oAll operation positions m
and minimum position.
oNever se
position.
oThe symbol on the control panel, next
indicate which gas burner it operates.
Automatic ignition
To ignite a burner:
oPress in the control knob of the burner that you
turn it anti-clockwise to the maximum position.
oIf you keep the control knob
for the burner will operate.
oOnce the burner is lit, turn the control knob to your required
setting between the maximum and minimum setting symbols.
oTo turn the burner of

16
oIn case of power failure, the burners can be lit by carefully using
a match.
Automatic ignition with flame failure safety device
(B70.1BL/PHG602/B77TCBL)
The appliance is fitted with a flame failure safety device on each
burner, which is designed to stop the flow of gas to the burner head in
the event of the flame going out.
To ignite a burner:
oPress in the control knob of the burner that you wish to light and
turn it anti-clockwise to the maximum position.
oIf you keep the control knob depressed, the automatic ignition
for the burner will operate.
oYou should hold down the control knob for 20 seconds after the
flame on the burner has lit.
oAfter this 20 second interval, turn the control knob to your
required setting between the maximum and minimum setting
symbols.
oIn case of power failure, the burners can be lit by carefully using
a match.
oTo turn the burner off, turn the control knob fully clockwise to
the gas off position.
oIn case of power failure, the burners can be lit by carefully using
a match.
Energy saving tips
PANS
BURNERS
Minimum
diametre
Maximum
diametre
Wok 220 mm 260 mm
Rapid 180 mm 220 mm
Semi-rapid 120 mm 200 mm
Auxiliary 80 mm 160 mm
oThe diametre of the bottom of the pan should correspond to that
of the burner.

oThe burner flame must never extend beyond the diametre of the
pan.
oUse flat bottomed pans only
oWhen possible, keep a lid on the pan whilst cooking.
oCook vegetables with as little water as possible, to reduce
cooking times.
IMPORTANT: Always place pans centrally over the hob burners and
position them so that the handles cannot get accidentally caught or
knocked off. You should also make sure that the handle is not over one
of the other hob burner flames.
Cleaning
Cleaning operations must only be carried out when
the hob is cool.
The appliance should be disconnected from your
mains supply before commencing any cleaning
process.
Cleaning the hob top
Any residues that are left on the hob top surface from cleaning
agents will damage it. You should remove any residues with
warm soapy water.
Abrasive cleaners or sharp objects will damage the hob surface;
you should clean it using warm soapy water.
Although it is easier to clean some deposits whilst the
hob surface is still warm. Make sure that the hob surface,
pan supports and hob burners have all cooled sufficiently
before you attempt to touch them.
17

18
After each use
oRemove the pan stands and wipe the appliance over with a soft,
damp cloth that has been put into warm soapy water. The cloth
should be wrung out after being taken out of the soapy water.
oDry the appliance by rubbing the surface with a soft, clean cloth.
Cleaning the hob burners
The hob burners should be cleaned once a week or more frequently if
they get soiled.
oIMPORTANT: Make sure that the hob surface, pan stands and
hob burners have cooled before you attempt to touch them.
oRemove the hob burners by pulling them upwards and away
from the hob top.
oSoak them for about ten minutes in hot water and a little
detergent.
oAfter cleaning and washing them, wipe and dry them carefully.
oBefore placing the burners back on the hob top, make sure that
the gas jet is not blocked.
oIMPORTANT: Make sure that you reassemble the burners in the
original way.
Maintaining the cast iron pan stands
oIMPORTANT: Make sure that the hob surface and pan stands
have cooled before you attempt to touch them.
oWipe the pan stands over with a soft, damp cloth that has been
put into warm soapy water. The cloth should be wrung out after
being taken out of the soapy water.
oUsing a paper towel, thoroughly dry the pan stands.
oTo maintain the appearance of the cast iron pan stands, we
would recommend that you rub a small amount of olive oil into
the pan stands. After you have finished cleaning them.

Installation
The installation must be carried out by a CORGI
registered installer, in accordance with the current
version of the following.
oGas Safety Regulations (Installation & Use)
oBuilding Regulations (issued by the Department of Environment)
oBuilding Standards (Issued by the Scottish Development
Department)
oIEE Wiring Regulations
oElectricity at Work Regulations BS 6172
oInstallation of Domestic Gas Cooking Appliances (if necessary,
BS 5482 Installation of Domestic LPG Appliances)
oBS 5440 Installation of Flues and Ventilation for Gas Appliances
oBaumatic Ltd Installation Instructions
19

Positioning
The adjacent furniture must be able to withstand a
minimum temperature rise of 85°C above the ambient
temperature of the room it is located in, during
periods of use.
oThis appliance can be located in a kitchen, a kitchen diner or a
bed sitting room. IMPORTANT: The appliance must not be
installed in a bathroom or shower room.
This appliance is classified as Class 3 and therefore is to be built into a
kitchen unit (depending on size) or 600mm worktop, providing the
following minimum distances are allowed:
oThe edges of the hob must be a minimum distance of 55 mm
from a side or rear wall.
o700 mm between the highest point of the hob surface (including
the burners) and the underside of any horizontal surface directly
above it.
o400 mm between the hob surface, providing that the underside
of the horizontal surface is in line with the outer edge of the hob.
If the underside of the horizontal surface is lower than 400 mm,
then it must be at least 50 mm away from the outer edges of
the hob.
20