Baumatic Studio Solari AS26SS User manual

1 el
AS26SS/B26SS/B40/
B70.1BL/B71TCBL/
B72BL/B72TCBL/W/
B77BL/B77TCBL/B78BL/
PHG602 Gas hobs

2
User Manual for your Baumatic
AS26SS 90 cm 4 Burner gas glass hob with thermocouples
B26SS 90 cm 4 Burner gas glass hob with thermocouples
B40 Circular Ø 52 cm Frameless glass gas hob with
thermocouples
B70.1BL 60 cm 4 Burner gas glass hob with thermocouples
B71TCBL 60 cm 4 burner gas glass hob with
thermocouples
B72BL 60 cm 4 burner gas glass hob with thermocouples
B72TCBL/W 60 cm 4 burner gas glass hob with
thermocouples
B77BL 70 cm 5 burner gas glass hob with thermocouples
B77TCBL 70 cm 5 burner gas glass hob with
thermocouples
B78BL 70 cm 5 Burner gas glass hob with thermocouples
PHG602 60 cm 4 burner gas glass hob with thermocouples
NOTE: This User Instruction Manual contains important
information, including safety & installation points, which will
enable you to get the most out of your appliance. Please keep it
in a safe place so that it is easily available for future reference; for
you or any person not familiar with the operation of the appliance.
DD 27/06/11

3
Contents
Environmental note 4
Important safety information 5 – 7
Specifications 8 – 20
AS26SS/B26SS 8
B40 9
B70.1BL 10
B71TCBL 11
B72BL 12
B72TCBL/W 13
B77BL 14
B77TCBL 15
B78BL 16
PHG602 17
Electricaldetails 18
Gasdetails 18
Gas hob surface layout 18 - 20
Using the gas hob 20 - 22
Beforefirstuse 20
Switching the hob on 20 - 21
Automatic ignition with flame failure safety device (all models) 21
Energysavingtips 22
Cleaning 23 - 24
Cleaning the hob top 23
Aftereachuse 23
Cleaning the hob burners 23 - 24
Maintaining the cast iron pan stands 24
Installation 24 - 36
Positioning 25-26
Unpacking the appliance 26
Installing the appliance 26 – 29
Gas connection 29
Ventilationrequirements 29-30
Gas Safety (Installation and Use) Regulations 30 – 31
Gas Safety (Installation and Use) Regulations (B40 only) 31 - 32
Gas Adjustment (Conversion to LPG) 32 - 33
Minimum flow adjustment for hob gas taps 34
Gas tap maintenance 35 - 36
Electricalconnection 36
Replacing the mains supply cable 36
My appliance isn’t working correctly 37
Contactdetails 38

4
Environmental note
oThe packaging materials that Baumatic uses are environmentally
friendly and can be recycled.
oPlease discard all packaging material with due regard for the
environment.

5
Important safety information
Your safety is of the utmost importance to Baumatic.
Please make sure that you read this instruction booklet
before attempting to install or use the appliance. If you
are unsure of any of the information contained in this
booklet, please contact the Baumatic Advice Line.
General Information
oThis appliance is designed for domestic household use and for
the cooking and frying of domestic foodstuffs.
oIMPORTANT: The adjacent furniture and all materials used in
the installation must be able to withstand a minimum
temperature of 85°C above the ambient temperature of the
room it is located in, whilst in use.
oCertain types of vinyl or laminate kitchen furniture are
particularly prone to heat damage or discolouration at
temperatures below the guidelines given above.
oAny damage caused by the appliance being installed in
contravention of this temperature limit, will be the liability of
the owner.
oYour new appliance is guaranteed against electrical or
mechanical defects, subject to certain exclusions that are noted
in Baumatic’s Conditions Of Guarantee. The foregoing does not
affect your statutory rights.
oThe use of this appliance for any other purpose or in any other
environment without the express agreement of Baumatic Ltd.
will invalidate any warranty or liability claim.
oYou should not use this appliance to store items on or as a work
surface.
oNo modifications to the appliance are permitted by Baumatic Ltd.
oYou should not store or place flammable or highly flammable
liquids/materials on top of or near the appliance. Items made
from aluminium, plastic or plastic film should also be kept away
from the appliance, as they may fuse to the surface.
oRepairs may only be carried out by Baumatic service
engineers or their authorised service agent.

6
Child Safety
oBaumatic strongly recommend that babies and young children
are prevented from being near to the appliance and not allowed
to touch the appliance at any time. During and after use, all
surfaces will be hot.
oIf it is necessary for younger family members to be in the
kitchen, please ensure that they are kept under close supervision
at all times.
oOlder children should only be allowed to utilise the appliance
when supervised.
General Safety
oThe appliance should only be installed and connected by a
GASSAFE registered installer.
oCare should be taken to ensure that the units and work surfaces
that you build the appliance into, meet with the relevant
standards.
During use
oAny film or stickers that are present on the hob surface when it
is delivered should be removed before use.
oCare should be used when utilising the appliance, otherwise
there is a risk of burns being caused.
oYou should not allow the electrical connection cables to come
into contact with the hob surface when it is hot or any hot
cookware.
oIf fat and oil overheats, then it can ignite extremely quickly. For
this reason, when cooking with fat and oil the appliance should
not be left unattended.
oMake sure that all of the cooking zones are switched off after
use.

7
Cleaning
oCleaning of the hob should be carried out on a regular basis.
oIMPORTANT: Before attempting to clean the appliance, it
should be disconnected from the mains and cool.
oGreat care should be taken whilst using this appliance and when
following the cleaning procedure.
oYou should not use a steam jet or any other high pressure
cleaning equipment to clean the appliance.
Installation
This appliance must be correctly installed by a
GASSAFE registered installer, strictly in
accordance with the manufacturer’s instructions
and the relevant British Standards. Please see the
specific section of this booklet that refers to
installation.
oBaumatic Ltd. declines any responsibility for injury or
damage, to person or property, as a result of improper
use or installation of this appliance.
oIf the appliance is being used in a Leisure Accommodation
Vehicle, the requirements of N 721 MUST be followed.
oBaumatic Ltd. DO NOT recommend that this appliance is
installed on any type of marine vessel.
Declaration of conformity
This appliance complies with the following European Directives:
-2006/95/CE General regulations / Low tension
-2009/142/CE Concerning gas appliances
-1935/2004/CE 90/128/EEC This appliance is suitable to come in
contact with food
-2004/108/CE Electromagnetic compatibility
The manufacturer declares that the hob is built using certified
materials and requires the appliance to be installed in accordance with
the standards currently in force. This appliance must be used by a
trained person for domestic purposes only.

8
Specifications
AS26SS/B26SS
Product dimensions: Aperture dimensions:
Height: 350 mm Height: 335 mm
Width: 880 mm Width: 865 mm
Depth: 50 mm
Product specifications:
o1 x 3.50 kW rapid burner
o2 x 1.75 kW semi-rapid burners
o1 x 1.00 kW auxiliary burner
oFront control operation
oAutomatic ignition
oWrap around designer frame
oFlame failure safety device on each burner
oRANA cast iron pan stands
Standard accessories:
oLPG conversion jets

9
B40
Product dimensions: Aperture dimensions:
Width: 520 mm Width: 500 mm
Height: 50 mm
Product specifications:
o1 x 3.50 kW triple crown (wok) burner
o1 x 3.00 kW rapid burner
o1 x 1.75 kW semi-rapid burner
oFront control operation
oAutomatic ignition
oFlame failure safety device on each burner
oRANA design cast iron pan stands
oIMPORTANT: Not suitable for installation above built-
under ovens due to the location of the gas inlet.
Standard accessories:
oLPG conversion jets

10
B70.1BL
Product dimensions: Aperture dimensions:
Depth: 510 mm Depth: 480 mm
Width: 580 mm Width: 560 mm
Height: 50 mm
Product specifications:
o1 x 3.00 kW rapid burner
o2 x 1.75 kW semi-rapid burners
o1 x 1.00 kW auxiliary burner
oSide control operation
oAutomatic ignition
oFlame failure safety device on each burner
oRANA cast iron pan stands
Standard accessories:
oLPG conversion jets

11
B71TCBL
Product dimensions: Aperture dimensions:
Depth: 510 mm Depth: 480 mm
Width: 580 mm Width: 560 mm
Height: 50 mm
Product specifications:
o1 x 3.00 kW rapid burner
o2 x 1.75 kW semi-rapid burners
o1 x 1.00 kW auxiliary burner
oSide control operation
oAutomatic ignition
oFlame failure safety device on each burner
oRANA cast iron pan stands
Standard accessories:
oLPG conversion jets

12
B72BL
Product dimensions: Aperture dimensions:
Depth: 510 mm Depth: 490 mm
Width: 580 mm Width: 560 mm
Height: 50 mm
o1 x 3.50 kW wok burner
o2 x 1.75 kW semi-rapid burners
o1 x 1.00 kW auxiliary burner
oFront control operation
oAutomatic ignition
oFlame failure safety device on each burner
oRANA cast iron pan stands
Standard accessories:
oLPG conversion jets

13
B72TCBL/W
Product dimensions: Aperture dimensions:
Depth: 510 mm Depth: 490 mm
Width: 580 mm Width: 560 mm
Height: 50 mm
o1 x 3.50 kW wok burner
o2 x 1.75 kW semi-rapid burners
o1 x 1.00 kW auxiliary burner
oFront control operation
oAutomatic ignition
oFlame failure safety device on each burner
oRANA cast iron pan stands
Standard accessories:
oLPG conversion jets

14
B77BL
Product dimensions: Aperture dimensions:
Depth: 510 mm Depth: 490 mm
Width: 680 mm Width: 562 mm
Height: 50 mm
Product specifications:
o1 x 3.50 kW wok burner
o1 x 3.00 kW rapid burner
o2 x 1.75 kW semi-rapid burners
o1 x 1.00 kW auxiliary burner
oFront control operation
oAutomatic ignition
oFlame failure safety device on each burner
oRANA cast iron pan stands
Standard accessories:
oLPG conversion jets

15
B77TCBL
Product dimensions: Aperture dimensions:
Depth: 510 mm Depth: 490 mm
Width: 680 mm Width: 562 mm
Height: 50 mm
Product specifications:
o1 x 3.50 kW wok burner
o1 x 3.00 kW rapid burner
o2 x 1.75 kW semi-rapid burners
o1 x 1.00 kW auxiliary burner
oFront control operation
oAutomatic ignition
oFlame failure safety device on each burner
oRANA cast iron pan stands
Standard accessories:
oLPG conversion jets

16
B78BL
Product dimensions: Aperture dimensions:
Depth: 510 mm Depth: 490 mm
Width: 680 mm Width: 562 mm
Height: 50 mm
Product specifications:
o1 x 3.50 kW wok burner
o1 x 3.00 kW rapid burner
o2 x 1.75 kW semi-rapid burners
o1 x 1.00 kW auxiliary burner
oFront control operation
oAutomatic ignition
oFlame failure safety device on each burner
oRANA cast iron pan stands
oTextured mirror glass with bevelled front edge
Standard accessories:
oLPG conversion jets

17
PHG602
Product dimensions: Aperture dimensions:
Depth: 510 mm Depth: 490 mm
Width: 580 mm Width: 560 mm
Height: 50 mm
Product specifications:
o1 x 3.50 kW wok burner
o2 x 1.75 kW semi-rapid burners
o1 x 1.00 kW auxiliary burner
oFront control operation
oAutomatic ignition
oFlame failure safety device on each burner
oRANA cast iron pan stands
oFrameless
Standard accessories:
oLPG conversion jets

18
Electrical details
Rated Voltage: 230 Vac 50 Hz
Supply Connection: 3 A (double pole switched fused outlet with
3mm contact gap)
Max Rated Inputs: 0.008 to 0.02 kW (depending on model)
Mains Supply Lead: 3 core x 0.75mm² (Type RR-F <HAR> marked)
Gas details
Connection: Rp ½ (ISO R7)
Type: Natural Gas (20.9 mbar),
Alternative LPG G30 (28-30 mbar),
Town gas G110 – 120 (8 mbar) to order.
For future reference please record the following information which can
be found on the rating plate and the date of purchase which can be
found on your sales invoice. The rating plate of your hob is located on
the underneath of the appliance. Therefore it is a good idea to record
this information before you install your appliance.
Model Number ……………………………….
Serial Number ……………………………….
Date of Purchase ……………………………….
Gas hob surface layout
AS26SS/B26SS
A = 1.75 kW semi-rapid burner
B = 3.50 kW wok burner
C = 1.00 kW auxiliary burner
D = Control panel

19
B40
A = 3.50 kW wok burner
B = 3.00 kW rapid burner
C = 1.75 kW semi-rapid
burner
D = Control panel
B70.1BL/B71TCBL
B72BL/B72TCBL/W/PHG602

20
B77BL/B77TCBL/B78BL
Using the gas hob
Before first use
IMPORTANT: You should clean the hob surface (see
“Cleaning and maintenance” section).
Switching the hob on
The following symbols will appear on the control panel, next to each
control knob:
0 = gas off
Large flame: maximum setting
Small flame: minimum setting
oThe minimum setting is at the end of the anti-clockwise rotation
of the control knob.
oAll operation positions must be selected between the maximum
and minimum position.
oNever select a knob position between the maximum and off
position.