Baumatic B47SS User manual

1
B47SS/BG60/BG61/B60.1SS/
BT61SS 4 burner gas hob.
BG60TC/B60.1TCSS 4 burner
gas hob with thermocouples.

User Manual for your Baumatic
B47SS 4 burner gas hob
BG60 4 burner gas hob
BG61 4 burner gas hob.
B60.1SS 4 burner gas hob.
BT61SS 4 burner gas hob
BG60TC/B60.1TCSS 4 burner gas hob
with thermocouples
2
NOTE: This User Instruction Manual contains important
information, including safety & installation points, which will
enable you to get the most out of your appliance. Please keep it
in a safe place so that it is easily available for future reference; for
you or any person not familiar with the operation of the appliance.
DD 08/11/07

3
Contents
Environmentalnote 4
mportant safety information 5 – 7
pecifications 8
sing the gas hob 10
12
leaning 12
nstallation 13
tap
y appliance isn’t working correctly 24
ontactdetails 25
I
S
Product & Aperture dimensions 8
Product specifications 8
Standard accessories 8
Optionalextras 8
Electricaldetails 8
Gasdetails 9
Gashobsurfacelayout 9
U
Beforefirstuse 10
Turning the hob on 10 – 11
Turning the hob on (BG60TC/B60.1TCSS) 11
Energy saving tips 11 –
C
Cleaning the hob top 12
Aftereachuse 12
Cleaning the hob burners 13
I
Positioning 14
Unpacking the appliance 15
Installing the appliance 15 – 17
Gasconnection 17
Ventilation requirements 18
Gas Safety (Installation and Use) Regulations 18 – 19
Gas Adjustment (Conversion to LPG) 20
Minimum flow adjustment for hob gas s 21
Gastapmaintenance 22
Electricalconnection 23
Replacing the mains supply cable 23
M
C

4
nvironmental noteE
oThe packaging materials that Baumatic uses are environmentally
Please discard all packaging material with due regard for the
friendly and can be recycled.
oenvironment.

5
Important safety information
Your safety is of the utmost importance to Baumatic. t
rmation
oThis appliance is designed for domestic household use and for
IMPORTANT: The adjacent furniture and all materials used in
f the
oCertain types of vinyl or laminate kitchen furniture are
oAny damage caused by the appliance being installed in ility of
oYour new appliance is guaranteed against electrical or re noted
The use of this appliance for any other purpose or in any other
oYou should not use this appliance to store items on or as a work
oNo modifications to the appliance are permitted by Baumatic Ltd.
You should not store or place flammable or highly flammable
y
oRepairs may only be carried out by Baumatic Service
Please make sure that you read this instruction bookle
before attempting to install or use the appliance. If you
are unsure of any of the information contained in this
booklet, please contact the Baumatic Technical
Department.
General Info
the cooking and frying of domestic foodstuffs.
othe installation must be able to withstand a minimum
temperature of 85°C above the ambient temperature o
room it is located in, whilst in use.
particularly prone to heat damage or discolouration at
temperatures below the guidelines given above.
contravention of this temperature limit, will be the liab
the owner.
mechanical defects, subject to certain exclusions that a
in Baumatic’s Conditions Of Guarantee. The foregoing does not
affect your statutory rights.
oenvironment without the express agreement of Baumatic Ltd.
will invalidate any warranty or liability claim.
surface.
oliquids/materials on top of or near the appliance. Items made
from aluminium, plastic or plastic film should also be kept awa
from the appliance, as they may fuse to the surface.
Engineers or their authorised service agent.

6
hild Safety
oBaumatic strongly recommend that babies and young children
oIf it is necessary for younger family members to be in the rvision
oOlder children should only be allowed to utilise the appliance
eneral Safety
C
are prevented from being near to the appliance and not allowed
to touch the appliance at any time. During and after use, all
surfaces will become hot.
kitchen, please ensure that they are kept under close supe
at all times.
when supervised.
G
The appliance should only be installed and connected by a
CORGI registered installer.
Care should be taken to ensure that the units and work surfaces
uring use
that you build the appliance into, meet with the relevant
standards.
D
Any film or stickers that are present on the hob surface when it
is delivered should be removed before use.
Care should be used when utilizing the appliance, otherwise
oYou should not allow the electrical connection cables to come
oIf fat and oil overheats, then it can ignite extremely quickly. For
there is a risk of burns being caused.
into contact with the hob surface when it is hot or any hot
cookware.
this reason, when cooking with fat and oil the appliance should
not be left unattended.
Make sure that all of the cooking zones are switched off after
Cleaning
oCleaning of the hob should be carried out on a regular basis.
IMPORTANT: Before attempting to clean the appliance, it
use.
oshould be disconnected from the mains and cool.

7
oGreat care should be taken whilst using this appliance and when
You should not use a steam jet or any other high pressure
nstallation his appliance must be correctly installed by a e
ific
oBaumatic Ltd. declines any responsibility for injury or
oIf the appliance is being used in a Leisure Accommodation
oBaumatic Ltd. DO NOT recommend that this appliance is
eclaration of conformity
his appliance complies with the following European Directives:
3/23/EEC dated 19/02/1973 Low Voltage Directive. of
E Marking Directive. ch food.
301-1 Safety Standards.
The manufacturer declares that the hob is built using certified ce with
following the cleaning procedure.
ocleaning equipment to clean the appliance.
I
T
CORGI registered installer, strictly in accordanc
with the manufacturer’s instructions and the
relevant British Standards. Please see the spec
section of this booklet that refers to installation.
damage, to person or property, as a result of improper
use or installation of this appliance.
Vehicle, the requirements of N 721 MUST be followed.
installed on any type of marine vessel.
D
T
-7
-89/336/EEC dated 03/05/1989 EMC Directive inclusive
Amending Directive 92/31/EEC.
-93/68/EEC dated 22/07/1993 C
-89/109/EEC dated 25/01/1992 Materials that can tou
-90/396/EEC Gas Products.
-EN60335-1, EN60335-2, EN
materials and requires the appliance to be installed in accordan
the standards currently in force. This appliance must be used by a
trained person for domestic purposes only.

8
pecificationsS
Product dimensions: Aperture dimensions:
eight: 500 mm Height: 480 mm
roduct specifications: rner (B47, BG60, BG60TC, B60.1TCSS &
owok burner (BG61SS & BT61SS)
S)
on ignition evice on each burner (BG60TC &
tandard accessories:
oLPG conversion jets (BG61SS & BT61SS)
p onal extras:
oBTGRID double-sided griddle plate (B60.1SS & BT61SS)
le trical details
ated Voltage: 230 Vac 50 Hz
n: switched fused outlet with
Max Rated Inputs: epending on model)
H
Width: 585 mm Width: 560 mm
Depth: 35 mm
Po1 x 3.00 kW rapid bu
B60.1SS)
1 x 3.30 kW
o2 x 1.75 kW semi-rapid burners
o1 x 1.00 kW auxillary burner
oSide control operation
oEnamelled pan stands (B47, BG60, BG60TC & BG61S
oHeavy duty cast iron pan stands (B60.1TCSS, B60.1SS &
BT61SS)
Push butto
oFlame failure safety d
B60.1TCSS only).
S
oWok stand
O ti
E c
R
Supply Connectio 3 A (double pole
3mm contact gap)
0.008 to 0.02 kW (d
Mains Supply Lead: 3 core x 0.75mm²

Gas details
9
onnection: Rp ½ (ISO R7) 9 mbar), alternative LPG G30
or future reference please record the following information which can
n
odel Number ……………………………….
erial Number ……………………………….
ate of Purchase ……………………………….
as hob surface layout
47/BG60/BG60TC/B60.1SS/B60.1TCSS
G61/B
C
Type: Natural Gas (20.
(28-30 mbar), town gas G110 – 120 (8 mbar)
toorder.
F
be found on the rating plate and the date of purchase which can be
found on your sales invoice. The rating plate of your hob is located o
the underneath of the appliance. Therefore it is a good idea to record
this information before you install your appliance.
M
S
D
G
B
B T61SS

10
sing the gas hob
efore first use
PORTANT: You should clean the hob surface (see
Turning the hob on
he following symbols will appear on the control panel, next to each
lack circle: gas off
arge flame: maximum setting
mall flame: minimum setting
oThe minimum setting is at the end of the anti-clockwise rotation
oAll operation positions must be selected between the maximum
oNever select a knob position between the maximum and off
oThe symbol on the control panel, next to the control knob will
oPress in and turn the appropriate control knob anti-clockwise to
oWhilst pressing in the control knob, press and hold down the
oThe ignition spark will operate, you should hold down the ignition
oTo regulate the flame, you should continue turning the control
um
oTo turn the burner off, turn the control knob fully clockwise to
the gas off position.
U
B
IM
“Cleaning and maintenance” section).
T
control knob:
B
L
S
of the control knob.
and minimum position.
position.
indicate which gas burner it operates.
the large flame symbol.
ignition button, which is located on the control panel.
button until the flame on the burner has lit.
knob anti-clockwise until the flame is at a suitable level. The
operating position MUST be at a position between the maxim
and minimum position.

11
g
Turning the hob on (BG60TC and B60.1TCSS only)
le safety
device on each burner, which is designed to stop the flow of gas
orol knob
anti-clockwise to the large flame symbol.
oand hold down the
ignition button, which is located on the control panel.
ohe ignition
button for 20 seconds after the flame on the burner has lit.
ol
knob anti-clockwise until the flame is at a suitable level. The
orn the control knob fully clockwise to
the gas off position.
ore, the burners can be lit by carefully using
a match.
Energy saving tips
ospond to that
of the burner.
ond beyond the diametre of the
pan.
oIn case of power failure, the burners can be lit by carefully usin
a match.
oThis particular appliance is fitted with a thermocoup
to the burner head in the event of the flame going out.
To light a burner, press in and turn the appropriate cont
Whilst pressing in the control knob, press
The ignition spark will operate, you should hold down t
To regulate the flame, you should continue turning the contro
operating position MUST be at a position between the maximum
and minimum position.
To turn the burner off, tu
In case of power failu
The diametre of the bottom of the pan should corre
The burner flame must never exte

12
When possible, keep a lid on the pan whilst cooking.
oCook vegetables with as little water as possible, to reduce
IM and
position them so that the handles cannot get accidentally caught or
nocked off. You should also make sure that the handle is not over one
oUse flat bottomed pans only
o
cooking times.
PORTANT: Always place pans centrally over the hob burners
k
of the other hob burner flames.
Cleaning
Cleaning operations must only be carried out when
the hob is cool.
fore commencing any cleaning
rocess.
e
Any residues that are left on the hob top surface from cleaning
e it. You should remove any residues with
ater and a little washing up.
e;
and a little washing up liquid.
ob
urface is still warm. Make sure that the hob surface, pan
upports and hob burners have all cooled sufficiently
After
oRemove the pan supports and wipe the appliance over with a
and a little washing up liquid.
h.
The appliance should be disconnected from your
mains supply be
p
Cleaning th hob top
agents will damag
w
Abrasive cleaners or sharp objects will damage the hob surfac
you should clean it using water
Although it is easier to clean some deposits whilst the h
s
s
before you attempt to touch them.
each use
damp cloth
oDry the appliance by rubbing the surface with a soft, clean clot

13
leaning the hob burners
he hob burners should be cleaned once a week or more frequently if
s have cooled before you attempt to touch them.
ully.
oBefore placing the burners back on the hob top, make sure that
Inst
C
T
they get soiled.
oIMPORTANT: Make sure that the hob surface, pan supports and
hob burner
oRemove the hob burners by pulling them upwards and away
from the hob top.
oSoak them for about ten minutes in hot water and a little
detergent.
oAfter cleaning and washing them, wipe and dry them caref
the gas jet is not blocked.
oIMPORTANT: Make sure that you reassemble the burners in the
original way.
allation
The installation must be carried out by a CORGI
istered installer, in accordance with the current
ersion of the following.
fe & Use)
oBuilding Regulations (issued by the Department of Environment)
Building Standards (Issued by the Scottish Development
Electricity at Work Regulations BS 6172
oInstallation of Domestic Gas Cooking Appliances (if necessary,
liances)
oBaumatic Ltd Installation Instructions
reg
v
ty Regulations (Installation
oGas sa
oDepartment)
oIEE Wiring Regulations
o
BS 5482 Installation of Domestic LPG App
oBS 5440 Installation of Flues and Ventilation for Gas Appliances

14
Po
The adjacent furniture must be able to withstand a
imum temperature rise of 85°C above the ambient
temperature of the room it is located in, during
or a
bed ORTANT: The appliance must not be
installed in a bathroom or shower room.
llowing minimum distances are allowed:
g
erside of any horizontal surface directly
above it.
oizontal surface is at least 50 mm away from the outer
edge of the hob.
oombustible materials.
sitioning
min
periods of use.
appliance can be located in a kitchen, a kitchen diner
sitting room. IMP
oThis
This appliance is classified as Class 3 and therefore is to be built into a
kitchen unit (depending on size) or 600mm worktop, providing the
fo
oThe edges of the hob must be a minimum distance of 55 mm
from a side or rear wall.
o700 mm between the highest point of the hob surface (includin
the burners) and the und
400 mm between the hob surface, providing that the underside
of the hor
50 mm clearance around the appliance and between the hob
surface and any c

15
Un
hen unpacking the appliance please check that the following items
kaging:
x Burner assemblies
instruction manual
antee card
esive label for amending the Gas Category on the
plate (required if the LPG conversion kit is used).
o
n
of the appliance and any surface that is below it.
packing the appliance
W
are contained within the pac
1 x Baumatic hob
2 x Pan supports
4
1 x Installation and
1 x Baumatic guar
4 x Fixing screws
4 x Clamps
1 x Sealing strip
4 x LPG jets
1 x Self-adh
appliance’s rating
Installing the appliance
Cut a hole in the worktop that corresponds with the drawings
shown above.
oIMPORTANT: You must have a gap of at least 25 mm betwee
the underneath

16
mat.
nce.
oDo not leave a gap in the sealing agent or overlap the thickness.
oIMPORTANT: Do not use a silicon sealant to seal the appliance
from the aperture in future, particularly if it needs to be
oCarefully turn the hob upside down and place it on a cushioned
oApply the sealing strip (A) provided around the edge of the
applia
oThe protective covering must be removed from both sides.
against the aperture. This will make it difficult to remove the hob
serviced.
(A) Sealing strip
(B) Clamp
(C) Screw

17
oPlace the clamp (B) over the holes that match the size of the
screws. There are one set of screw holes in each corner of the
hob. Slightly tighten a screw (C) through the clamp (B) so that
st
o
you have cut out.
fully tighten the screws
(C) to secure the hob into position.
Ga c
This appliance must be installed by a competent
n in accordance with the current versions of
the following UK (United Kingdom) or ROI (Republic
t
ohis cooker is supplied to run on natural gas only and cannot
r type of gas without modification.
use of
other gases, please contact the Baumatic Technical Department.
o
(Installation and Use) (Amendment) Regulations and the
osecution under the
regulations quoted above.
ond service work, in compliance with
the above regulations.
the clamp is attached to the hob, but so that you can still adju
the position of it.
Carefully turn the hob back over and then gently lower it into the
aperture hole that
oOn the underneath of the hob, adjust the clamps into a position
that is suitable for your worktop. Then
s onnection
perso
of Ireland) Regulations and Safety Standards or
their European Norm Replacements.
information Importan
T
be used on any othe
oConversion for use on LPG and other gases must only be
undertaken by a qualified person. For information on the
The cooker must be installed by a qualified person, in
accordance with the current edition of the Gas Safety
relevant building/I.E.E. Regulations.
Failure to install the appliance correctly could invalidate
Baumatic’s guarantee and lead to pro
In the UK, CORGI registered installers are authorised to
undertake the installation a

18
entilation requirements
oThe room containing the cooker should have an air supply in
rrent edition of BS 5440: Part 2:
e an
as a door which
opens directly to the outside.
or
.
5440: Part 2: should be consulted to
determine air vent requirements.
otall a mechanical ventilation
device (mechanical cooker hood).
oa window, or by increasing
the level of the mechanical ventilation device (where present).
o
are followed.
odensation.
³/h for each kW of power (see total
power in kW on the appliance rating plate).
V
accordance with the cu
oThe room must have opening windows or equivalent; some
rooms may also require a permanent vent.
oIf the room has a volume between 5 and 10m³, it will requir
air vent of 50cm² (effective area). Unless it h
If the room has a volume of less than 5m³, it will require an ai
vent of 100cm² (effective area)
oIf it is installed in a room with a volume that exceeds 11m³, then
no air vent is required.
oIf there are any other fuel burning appliances in the same room
the current edition of BS
Ensure that the room containing the cooker is well ventilated,
keep natural ventilation holes or ins
Prolonged intensive use of the appliance may call for additional
ventilation, either by the opening of
This hob is not fitted with a device for discharging the products
of combustion. Ensure that the ventilation rules and regulations
The walls behind and near the hob should be resistant to heat,
steam and con
oRemember that the quantity of air necessary for combustion
must never be less than 2m

19
as Safety (Installation and Use) Regulations
MPORTANT: The appliance MUST be connected to the gas
ipe and an
olation tap fitted in an easily accessible position.
nt
e Gas Safety
Installation and Use Regulations.
o
The cooker must also be installed in accordance with
the current edition of BS 6172. Failure to install the cooker
o
oFully tighten the elbow and seal onto the gas rail.
oThe elbow MUST be pointing in a downwards direction.
oGas pressure may be checked on a semi-rapid hob burner.
. Light
the other burners and observe that the gas pressure complies
o
G
I
supply by use of a ½ BSP Elbow, seal, copper p
is
oIt is the law that all gas appliances are installed by compete
persons in accordance with the current edition of th
It is in your interest and that of safety to ensure compliance with
the law.
oIn the UK, CORGI registered installers work to safe standards of
practice.
correctly could invalidate the warranty, liability claims and lead
to prosecution.
Put the gas seal into the elbow.
Remove the appropriate injector and attach a test nipple
with the gas standards in force.
IMPORTANT: On completion carry out a gas soundness
test.

20
as adjustment (Conversion to LPG)
All work must be carried out by a CORGI registered
N
supply before changing the injectors and/or adjusting the
minimum flow of the burners.
oRemove the pan-stands, burners and
flame spreaders (A).
oUnscrew the injector (B) and replace it
with the stipulated injector for the new gas
supply (see table below).
o
burner.
oleted before the appliance is next used.
G
engineer.
T: Always isolate the cooker from the electricityIMPORTA
Reassemble all the burners carefully; in particular you should
make sure that the flame spreader is correctly placed on the
IMPORTANT: The minimum flow adjustment process must
be comp