Baumuller b maXX 3000 manual 

Instruction handbook
Read the Manual before starting any work!
Language English
Document No. 5.12068.01
Part No. 450469
Status 27-May-2014
E5.12068.01
Control Panel
for
b maXX 3000
b maXX 5000

Copyright This Instruction handbook may be copied by the owner in any quantity, but only for internal
use. This Instruction handbook may not be copied or reproduced, in whole or in part, for any
other purposes.
The use and disclosure of information contained in this Instruction handbook are not permit-
ted.
Designations and company marks contained in this Instruction handbook could be trade-
marks, the use of which by third parties for their own purposes could violate the rights of the
rights holder.
Preliminary information
Warning Insofar as this document is identified as being preliminary information, the following
applies:
this version is regarded as providing advance technical information to users of the described
devices and their functions at an early enough time in order to adapt to any possible changes
or expanded functionality.
This information must be regarded as being preliminary, as it has not yet passed through
Baumüller's internal review process. In particular, this information is still subject to changes,
thus no legal liability can be derived from this preliminary information. Baumüller assumes no
liability for damages that might arise from this possibly faulty or incomplete version.
If you detect or suspect any content errors and/or major form errors in this preliminary infor-
mation, we request that you notify the Baumüller support specialist responsible for you.
Please provide us, via this employee, with your insights and comments so that we can take
them into account and include them when transitioning from the preliminary information to
the final information (as reviewed by Baumüller).
The conditions stipulated in the following section under "Obligatory" are invalid in case of pre-
liminary information.
Obligatory This Instruction handbook are a part of the equipment/machine. This Instruction handbook
must be available to the operator at all times and must be in legible condition. If the equip-
ment/machine is sold or moved another location, this Instruction handbook must be passed
on by the owner together with the equipment/machine.
After any sale of the equipment/machine, this original and all copies must be handed over to
the buyer. After disposal or any other end use, this original and all copies must be destroyed.
When the present Instruction handbook is handed over, corresponding sets of Instruction
handbooks of a previous version are automatically invalidated.
Please note that the specifications/data/information are current values according to the
printing date. These statements are not legally binding with regard to measurements,
computation or calculations.
Baumüller Nürnberg GmbH reserves the right, in developing its products further, to change
the technical specifications and handling of it products concerned without prior notice.
No liability can be accepted concerning the correctness of this Instruction handbook unless
otherwise specified in the General Conditions of Sale and Delivery.
Baumüller Nürnberg GmbH
Ostendstr. 80 - 90
90482 Nuremberg
Germany
Tel. [phone] - 0
Fax: [phone] - 1 30
Email : [email protected]
Internet: www.baumueller.de

Instruction handbook Control Panel BM3000/BM5000
Document No. 5.12068.01
3
of 68
Table of contents
1 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1.1 Information on this Instruction handbook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1.2 Associated documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1.3 Key to symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
1.4 Limitation of liability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
1.5 Copyright protection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
1.6 Applicable documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
1.7 Spare parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
1.8 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
1.9 Guarantee provisions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
1.10 Customer service. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2 Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2.1 Contents of the instruction handbook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2.2 Changes and modifications to the device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2.3 Appropriate use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2.4 Responsibility of the operating company . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2.5 Protection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2.6 Training of the personnel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
2.7 Special hazards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
2.8 Fire fighting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
2.9 Safety equipment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
2.10 Behavior in hazardous situations or at accidents . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
3 Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
3.1 Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
3.2 Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
3.3 Operating conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
3.3.1 Required environmental conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
3.3.2 Electrical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
4 Design and Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
4.1 Construction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
4.2 Identification of the device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
4.2.1 Type code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
4.3 Display and operation elements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
4.3.1 LCD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
4.3.2 Function keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
5 Transport and Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
5.1 What to observe when transporting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
5.2 Transport inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
5.3 Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
5.4 Disposal of the packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
6 Mounting and Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
6.1 Mounting instruction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Instruction handbook Control Panel BM3000/BM5000
Document No. 5.12068.01 Baumüller Nürnberg GmbH
4
of 68
Table of contents
7 Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
7.1 Safety notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
7.2 Start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
7.3 Menu levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
7.4 Basic menus. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
7.4.1 Parameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
7.4.1.1 Direct parameter selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
7.4.1.2 Display parameter value. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
7.4.1.3 Edit parameter value . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
7.4.2 Parameter set management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
7.4.2.1 Load parameter set from controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
7.4.2.2 Transmit parameter set to the controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
7.4.3 Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
7.4.3.1 Scaling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
7.4.3.2 Decimal point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
7.4.3.3 Write-protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
7.4.3.4 Start screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
7.4.3.5 Drive status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
7.4.3.6 Predefined parameter list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
7.4.4 Info. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
7.4.4.1 Firmware versions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
7.4.4.2 Control panel info . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
7.4.4.3 Reset Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
7.4.5 Predefined parameter list. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
7.4.6 Drive status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
7.4.6.1 Reset error messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
7.5 Quick guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
8 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
8.1 Controller error messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
8.2 Faults Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Table of Figures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Overview of Revisions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

5
of 68
Instruction handbook Control Panel BM3000/BM5000
Document No. 5.12068.01
1GENERAL
1.1 Information on this Instruction handbook
This Instruction handbook provides important information on handling the device. A pre-
requisite for safe work is compliance with all specified safety notes and procedural in-
structions.
Additionally, the valid accident prevention regulations and general safety regulations ap-
plicable to the scope of application the device must be complied with.
Read this Instruction handbook, particularly the safety notes chapter, completely before
beginning any work on the device. This Instruction handbook is part of the product and
must be kept accessible to personnel at all times in the immediate vicinity of the device.
1.2 Associated documents
Doc. No. Part No.
German
Part No.
English
Instruction handbook BM3000 5.11018 441838 441839
Parameter manual BM3000 5.12001 442289 442290
Instruction handbook BM5000 5.09021 439682 439683
Parameter manual BM5000 5.09022 428331 431082

Key to symbols
Instruction handbook Control Panel BM3000/BM5000
Document No. 5.12068.01 Baumüller Nürnberg GmbH
6
of 68
1.3
1.3 Key to symbols
Warning notes
Warning notes are identified by symbols in this Instruction handbook. The notes are in-
troduced by signal words that express the extent of the danger.
It is imperative that these notes be complied with and are conscientiously regarded in or-
der to prevent accidents, personal injury and material damage.
Recommen-
dations
DANGER!
....points out a directly dangerous situation, that will lead to severe injuries or death,
if not avoided.
WARNING!
....points out a potentially dangerous situation, that could lead to severe injuries or
death, if not avoided.
CAUTION!
....points out a potentially dangerous situation, that can lead to minor or slight injuries,
if not avoided.
NOTICE!
....points out a potentially dangerous situation, that can lead to material damage, if
not avoided.
NOTE!
....highlights useful hints and recommendations, as well as information for the effi-
cient and trouble-free use.

General
Instruction handbook Control Panel BM3000/BM5000
Document No. 5.12068.01
7
of 68
1
1.4 Limitation of liability
All specifications and notes in this Instruction handbook were compiled taking into ac-
count the applicable standards and regulations, the state of the art and our knowledge
and experience of many years.
The manufacturer assumes no liability for damages due to:
mnoncompliance with the Instruction handbook
musage for other than the intended purpose
musage by untrained personnel
The actual scope of delivery can vary in case of optional equipment, laying claim to addi-
tional order options, or on account of the latest technical changes to the explanations and
representations described herein.
The user bears the responsibility for performing service and commissioning in accor-
dance with the safety regulations of the applicable standards and all other relevant gov-
ernmental or local regulations referring to the dimensioning and protection of conductors,
grounding, disconnectors, overcurrent protection, etc.
The person who carried out the mounting or installation is liable for any damage, which
incurred when assembling or connecting the device.
1.5 Copyright protection
The Instruction handbook must be treated confidentially. It is to be used exclusively by
personnel who work with the device. The consignment of the Instruction handbook to third
persons without the written permission of the manufacturer is prohibited.
1.6 Applicable documents
Components of other manufacturers are integrated into the device. For these purchased
parts, hazard assessments have been performed by the respective manufacturers. The
compliance of the design construction with the applicable European and national regula-
tions has been declared for the components by the respective manufacturers.
NOTE!
The specific contents, text, drawings, images and other representations are copy-
righted and subject to industrial property rights. Any prohibited usage is punishable
by law.

Spare parts
Instruction handbook Control Panel BM3000/BM5000
Document No. 5.12068.01 Baumüller Nürnberg GmbH
8
of 68
1.7
1.7 Spare parts
Procure spare parts through an authorized dealer or directly from the manufacturer.
1.8 Disposal
Insofar as no take-back or disposal agreement has been made, please disassemble units
correctly and properly recycle the constituent parts.
1.9 Guarantee provisions
The guarantee provisions are stated in a separate document of the sales documents.
The devices described herein may only be operated in accordance with the stipulated
methods, procedures and conditions. Anything else not presented here, including the op-
eration of devices in mounted positions, is not permitted and must be cleared with the
plant on a case-by-case basis. If the devices are operated in any other manner than as
described within this Instruction handbook, then all guarantee and warranty rights are ren-
dered null and void.
1.10 Customer service
Our customer service is available to provide you with technical information.
Info on the responsible contact persons is available at all times via telephone, fax, mail or
the Internet.
WARNING!
False or flawed spare parts can lead to damage, malfunction or complete fail-
ure, thus endangering safety.
Therefore:
mOnly use original spare parts of the manufacturer.

9
of 68
Instruction handbook Control Panel BM3000/BM5000
Document No. 5.12068.01
2SAFETY
This section provides an overview of all of the important safety aspects for optimum pro-
tection of personnel as well as for the safe and problem-free operation.
2.1 Contents of the instruction handbook
Each person who is tasked with performing work on or with the device must have read
and understood the instruction handbook before working with the device. This also ap-
plies if the person involved with this kind of device or a similar one, or has been trained
by the manufacturer.
2.2 Changes and modifications to the device
In order to prevent hazards and to ensure optimum performance, no changes, additions
or modifications may be undertaken on the device that have not been explicitly approved
by the manufacturer.
2.3 Appropriate use
The Control Panel BM3000/BM5000 can be used for devices type b maXX 5000 or
3200/3300 only.
A device is considered as being used compliant with its intended purpose if all notes and
information of this Instruction handbook are adhered to.

Responsibility of the operating company
Instruction handbook Control Panel BM3000/BM5000
Document No. 5.12068.01 Baumüller Nürnberg GmbH
10
of 68
2.4
2.4 Responsibility of the operating company
The device will be used in commercial areas. Thus, the proprietor of the device is subject
to the legal work safety regulations.
Along with the notes on work safety in this Instruction handbook, the safety, accident pre-
vention and environmental protection regulations valid for the area of application of this
device must be complied with. Whereby:
mThe operating company must inform himself about the applicable work health and safe-
ty regulations and ascertain, in a hazard assessment, any additional hazards that could
arise from the special working conditions in the use area of the device. These must
then be implemented in the form of operating instruction for operation of the device.
mThis Instruction handbook must be kept accessible to personnel working with the de-
vice at all times in the immediate vicinity of the device.
mThe specifications of the Instruction handbook must be adhered to completely and
without exception.
mThe device may only be operated in a technically faultless and operationally safe con-
dition.
2.5 Protection
WARNING!
Danger arising from usage for an unintended purpose!
Any usage that goes beyond the intended purpose and/or any non-compliant use of
the device can lead to dangerous situations.
Therefore:
mOnly use the device compliant with its intended purpose.
mObserve all specifications of this Instruction handbook.
mEnsure that only qualified personnel work with/on this device.
mThe device may only be operated in a technically flawless condition.
mOnly operate the device in combination with devices type b maXX BM5000 or
BM3200/3300.
Protection classification
BM5-O-HMI IP 20

Safety
Instruction handbook Control Panel BM3000/BM5000
Document No. 5.12068.01
11
of 68
2
2.6 Training of the personnel
In this Instruction handbook, the following qualifications are stipulated for various areas
of activity:
mOperating personnel
nThe drive system may only be operated by persons who have been specially trained,
familiarized and authorized.
nTroubleshooting, maintenance, cleaning, maintenance and replacement may only
be performed by trained or familiarized personnel. These persons must be familiar
with the Instruction handbook and act accordingly.
nInitial operation and familiarization may only be performed by qualified personnel.
mQualified personnel
nElectrical engineers authorized by Baumüller Nürnberg GmbH, and qualified electri-
cians of the customer or a third party who have learned to install and maintain
Baumüller drive systems and are authorized to ground and identify electrical power
circuits and devices in accordance with the safety engineering standards of the com-
pany.
nQualified personnel have had occupational training or instruction in accordance with
the respective locally applicable safety engineering standards for the upkeep and
use of appropriate safety equipment.
WARNING!
Risk of injury due to insufficient qualifications!
Improper handling can lead to significant personal injury and material damage.
Therefore:
mCertain activities can only be performed by the persons stated in the respective
chapters of this Instruction handbook.

Special hazards
Instruction handbook Control Panel BM3000/BM5000
Document No. 5.12068.01 Baumüller Nürnberg GmbH
12
of 68
2.7
2.7 Special hazards
In the following section, the remaining marginal risks will be stated that have been iden-
tified as a result of the hazard analysis.
Observe the safety notes listed here and the warning notes in the further chapters of this
manual to reduce health risks and dangerous situations.
Electrical current
Danger from re-
sidual energy
DANGER!
Risk of fatal injury from electrical current!
There is an immediate risk of fatal injury if live electrical parts are contacted. Damage
to the insulation or individual components can be life-threatening.
Therefore:
mSwitch off the electrical power immediately in case of damage to the power supply
insulation.
mOnly allow work on the electrical system to be performed by qualified personnel.
mSwitch off the current when any kind of work is being performed on the electrical
system and ensure safety before switching on again.
DANGER!
Risk of fatal injury from electrical current!
Stored electric charge.
Discharge time of the system = discharge time of the device with the longest DC link
discharge time connected to the DC link.
Therefore:
mDo not touch electrically live parts before taking into account the discharge time of
the capacitors.
mPay attention to the corresponding notes on the device.
mIf several devices are connected e.g. with a mains rectifier unit, the DC link dis-
charge can take a much longer time. In this case, the necessary waiting period
must itself be determined or a measurement made to ensure the device is de-en-
ergized.

Safety
Instruction handbook Control Panel BM3000/BM5000
Document No. 5.12068.01
13
of 68
2
Moving compo-
nents
2.8 Fire fighting
2.9 Safety equipment
WARNING!
Risk of injury from moving components!
Rotating components and/or components moving linearly can result in severe injury.
Therefore:
mDo not touch moving components during operation.
mDo not open any covering during operation.
mThe amount of residual mechanical energy depends on the application. Powered
components still turn/move for a certain length of time even after the power supply
has been switched off. Ensure that adequate safety measures are taken.
DANGER!
Risk of fatal injury from electrical current!
There is a risk of electric shock if an electrically-conductive, fire-extinguishing agent
is used.
Therefore:
mUse the following fire-extinguishing agent:
ABC powder / CO2
WARNING!
Risk of fatal injury due to non-functional safety equipment!
Safety equipment provides for the highest level of safety in a facility. Even if safety
equipment makes work processes more awkward, under no circumstances may they
be circumvented. Safety can only be ensured by intact safety equipment.
Therefore:
mBefore starting to work, check whether the safety equipment in good working order
and properly installed.

Behavior in hazardous situations or at accidents
Instruction handbook Control Panel BM3000/BM5000
Document No. 5.12068.01 Baumüller Nürnberg GmbH
14
of 68
2.10
2.10 Behavior in hazardous situations or at accidents
Preventive mea-
sures
mAlways be prepared for accidents or fire!
mKeep first-aid equipment (e.g. first-aid kits, blankets, etc.) and fire extinguishers readily
accessible.
mFamiliarize personnel with accident signalling systems, first aid equipment and life sav-
ing equipment.
And if something
does happen: re-
spond properly.
mStop operation of the device immediately with an EMERGENCY Stop.
mInitiate first aid measures.
mEvacuate persons from the danger zone.
mNotify the responsible persons of the site.
mAlarm medical personnel and/or the fire department.
mKeep access routes clear for rescue vehicles.

15
of 68
Instruction handbook Control Panel BM3000/BM5000
Document No. 5.12068.01
3TECHNICAL DATA
3.1 Dimensions
Figure 1: Dimensions Control Panel BM3000/BM5000
NOTE!
All dimensions in mm.

Weight
Instruction handbook Control Panel BM3000/BM5000
Document No. 5.12068.01 Baumüller Nürnberg GmbH
16
of 68
3.2
3.2 Weight
3.3 Operating conditions
3.3.1 Required environmental conditions
3.3.2 Electrical Data
Weight 25 g
Transportation temperature range - 25 °C to + 70 °C
Transportation climate classification
EN 60721-3-2
2 K 3
Storage temperature range - 25 °C to + 70 °C
Storage climate classification
EN 60721-3-1
1 K 4
Operation temperature range min. 5 °C to max. 55 °C
Operation climate classification
EN 60721-3-3
3 K 3
Altitude of site 2) up to 2000 m altitude
Humidity (operation)
EN 60721-3-3
relative humidity: 5 % to 85 % non-condensing
and
absolute humidity: 1 g/m3to 25 g/m3
Ionizing and non-ionizing radiation < measurable range
Vibration, shock and repetitive shock
EN 61800-5-1, section 5.2.6.4 vibration test
max. 0,5 g operating (1 g tested)
Pollution degree
EN 61800-5-1, table 6, tab. 2
2
NOTICE!
Normally, only non-conductive pollution occurs. Any conductive pollution, if for a
short-term or permanently, is forbidden and can cause the destruction of the device.
The customer is responsible for destructions, which are caused by conductive mate-
rials.
Current consumption max. 116 mA
Power loss max 580 mW, typical 200 mW

17
of 68
Instruction handbook Control Panel BM3000/BM5000
Document No. 5.12068.01
4DESIGN AND FUNCTION
In this chapter the basic design of the device Control Panel BM3000/BM5000 is de-
scribed and the type code on the devices is explained.
4.1 Construction
Figure 2: Control Panel
The Control Panel is used to parameter display, parameter setting and control of
Baumüller drives BM3000/BM5000.
The Control Panel can display, change and save controller parameters. A backup of a
controller parameter set can be transmitted to the nonvolatile memory directly.

Construction
Instruction handbook Control Panel BM3000/BM5000
Document No. 5.12068.01 Baumüller Nürnberg GmbH
18
of 68
4.1
Following types are supported:
nb maXX 3200/3300 series
nb maXX 5000 series
from firmware version 01.05.
Available language
nEnglish
nGerman and other languages in preparation
Configuration
nScaling
nPredefined parameter list
nParameter list for drive status
nStart screen
nManagement of up to 3 parameter sets
nSelection of type of decimal point
Memory
n3 complete parameter sets can be stored
(each max. 64 kByte)
Display elements
nOLED-LC Display, 4 lines, 128 x 96 pixel, 1,3“
Operation elements
n4 soft keys, type rubber keyboard
Interfaces
nserial interface with GDP protocol
Power supply
ninternal via controller

Design and Function
Instruction handbook Control Panel BM3000/BM5000
Document No. 5.12068.01
19
of 68
4
4.2 Identification of the device
Type plate The type code can be found on the type plate.
Figure 3: Type plate
Serial number
starting with year
of production
12 = 2012
Article number
2DataMatrix
contains device information,
e.g. type, serial number and
article number

Identification of the device
Instruction handbook Control Panel BM3000/BM5000
Document No. 5.12068.01 Baumüller Nürnberg GmbH
20
of 68
4.2
4.2.1 Type code
The type code has following format:
BM5-O-HMI-000-000-000.
The type code is explained in the following table.
BM5-O-HMI-XXX-XXX-XXX Device generation
BM5-O-HMI-XXX-XXX-XXX Module type option module
BM5-O-HMI-XXX-XXX-XXX Module name
HMI: Control Panel
BM5-O-HMI-XXX-XXX-XXX Module version
BM5-O-HMI-XXX-XXX-XXX Hardware type
BM5-O-HMI-XXX--XXX-XXX Software type