Baxton Studio BBT5391 - DC User manual

HARDWARE LIST
ITEM DESCRIPTION QTY
1JCBC Bolt M6 x 45mm 4 PCS
2WOOD SCREW M4 x 45mm 6 PCS
3WOOD DOWEL M8 x 30mm 8 PCS
4M6 SPRING WASHER 4 PCS
5M4 ALLEN KEY (BALL SHAPE) 1 PC
Read this instruction carefully. See hardware and furniture part list for guidance.
Be sure all parts are complete, before you assemble. Place all wooden furniture
parts on a clean and flat soft surface to prevent from being scratched.
Follow the figure to start assembling.
CAUTIONS :1. Do not FULLY - TIGHTEN the nut or nut bolt until all nut or bolt is ready assembed.
2. Do not OVER - TIGHTEN the nut or bolt to avoid causing damages to the thread.
3. Keep all hardware parts out of reach of children.
NOTE : THE LIST AND QUANTITY SHOWN ARE FOR 1 UNIT ASSEMBLY.
Tool needed : Screwdriver & Rubber Mallet (not provided).
ASSEMBLY INSTRUCTIONS
MODEL : BBT5391 - DC 1 OF 3
STEP 1 STEP 2
3
FRONT
R
FRONT L
R
L
FRONT
FRONT
PART LIST
ITEM DESCRIPTION QTY
ACHAIR LEG (L) 1 PC
BCHAIR LEG (R) 1 PC
CSUPPORT RAIL 2 PCS
DCHAIR 1 PC
B
A
C
3C

ASSEMBLY INSTRUCTIONS 2 OF 3
STEP 3 STEP 4
R
STEP 3.1 STEP 3.2
STEP 4.1
STEP 4.2
B
C
FRONT
BACK
FRONT
BACK
AL
5
1
FRONT
R
C
R
L
4
5
1
4

ASSEMBLY INSTRUCTIONS 3 OF 3
STEP 5 STEP 6
Note : Follow the line drawing to assemble the chair leg.
x6
2
E

PART LIST
ITEM DESCRIPTION QTY
ATABLE TOP 1 PC
BLEGS 4 PCS
ASSEMBLY INSTRUCTIONS PART LIST
ITEM DESCRIPTION QTY
1JCBC BOLT M6 x 60mm 8 PCS
2M6 FLAT WASHER 8 PCS
3M6 SPRING WASHER 8 PCS
4M4 ALLEN KEY 1 PC
STEP 1
Read this instruction carefully. See hardware and furniture part list for guidance.
Be sure all parts are complete, before you assemble. Place all wooden furniture
parts on a clean and flat soft surface to prevent from being scratched.
Follow the figure to start assembling.
CAUTIONS :1. Do not FULLY - TIGHTEN the nut or nut bolt until all nut or bolt is ready assembed.
2. Do not OVER - TIGHTEN the nut or bolt to avoid causing damages to the thread.
3. Keep all hardware parts out of reach of children.
NOTE : THE LIST AND QUANTITY SHOWN ARE FOR 1 UNIT ASSEMBLY.
STEP 2
A
B
2
3
1
4